Search   
MSDS 
:
 Betaine, anhydrous, 98%
CAS 
:
 107-43-7
SYNONYMS 
:
 (Carboxymethyl)trimethylammonium hydroxide inner salt; Abromine;     alpha-Earleine; Glycine betaine; Glycocoll betaine; Trimethylglycine     hydroxide inner salt; Lycine; Oxyneurine; Trimethylglycocoll     anhydride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 107-43-7 |Betaine, anhydrous | 98 | 203-490-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use with
adequate ventilation. Minimize dust generation and accumulation.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white granular
Odor: Almost odorless.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 301 deg C dec
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble in chloroform
Specific Gravity/Density:
Molecular Formula: C5H11NO2
Molecular Weight: 117.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, exposure to moist
air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 107-43-7: DS5900000
LD50/LC50:
Not available.
Carcinogenicity:
Betaine, anhydrous -
Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 107-43-7: 0
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
CAS# 107-43-7 is listed on Canada's DSL List.
CAS# 107-43-7 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 107-43-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/17/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,2-Propanediol, 99% 57-55-6
Ethyl 2-chloroacetoacetate, 97% 609-15-4
Pyridine, 99+% 110-86-1
Pyridine, nonaqueous titration grade 110-86-1
Pyridine, reagent ACS 110-86-1
2-(4-Sulfophenylazo)1,8-Dihydroxy-3,6-Naphthalenedisulfonic Acid 23647-14-5
trans-4-Phenyl-3-buten-2-one, p.a. 1896-62-4
Pyrogallol, 99% 87-66-1
Quinoline, 96% 91-22-5
Quinoline, synthetic, 99% (gc) 91-22-5
p-Benzoquinone 106-51-4
Resorcinol, 98% 108-46-3
Rubidium Chloride, 99.8+% 7791-11-9
Sodium Hydride, 60% Dispersion in Mineral Oil, Toluene Soluble Bags 7646-69-7
Salicylic Acid, 99+% 69-72-7
3-Indazolinone, 97% 7364-25-2
Cellulose Acetate Propionate, Average M.W. 15000 9004-39-1
Cellulose Acetate Propionate, Average M.W. 75000 9004-39-1
Diphenylselenide, 95% 1132-39-4
Silver acetate, 99% 563-63-3
Diethyldithiocarbamic Acid, Silver Salt, 99% 1470-61-7
Silver Iodide, 99.999% 7783-96-2
Silver nitrate, 0.1N standard solution 7732-18-5
Silver nitrate, reagent ACS, electrophoresis grade 7761-88-8
Silver nitrate, ultrapure grade 7761-88-8
Silver(I) oxide, 99+% 20667-12-3
Silver sulfate, 99% 10294-26-5
Acetic Acid, Sodium Salt, Anhydrous, U.S.P./N.F. 127-09-3
Acetic Acid, Sodium Salt, Anhydrous, Reagent acs (crystals) 127-09-3
Acetic acid, sodium salt, trihydrate pure 6131-90-4
Acetic acid, sodium acetate trihydrate, reagent acs (crystals) 6131-90-4
1,3-Diacetoxybenzene, 99% 108-58-7
Sodium Bicarbonate, C.P. 144-55-8
Sodium Bicarbonate, Reagent ACS (Powder) 144-55-8
Sodium Bromide, Anhydrous, 99+% 7647-15-6
Sodium carbonate, anhydrous 99.95 to 100.05% 497-19-8
Sodium Carbonate, Anhydrous Powder, P.A. 497-19-8
Betaine, anhydrous, 98% 107-43-7
Sodium Carbonate, Anhydrous, Reagent ACS (Powder) 497-19-8
Sodium Chloride, P.A. 7647-14-5
Triphenyl phosphite, 97% 101-02-0
Sodium Cyanide, P.A. 143-33-9
Dimethyl malonate, 97% 108-59-8
Sodium fluoride, 97% 7681-49-4
Sodium fluoride, reagent ACS, powder 7681-49-4
Sodium Hydrosulfite, Tech., ca 85% 7775-14-6
Sodium Iodate, P.A. 7681-55-2
Desoxycorticosterone 64-85-7
Sodium metabisulfite, anhydrous, 97% 7446-09-5
Sodium Methoxide, 30 wt% Solution in Methanol 67-56-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net