**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1132-39-4 |Diphenylselenide | 95 | 214-474-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/25 33
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Toxic by inhalation and if swallowed. Danger of cumulative
effects.The toxicological properties of this material have not been
fully investigated.
Potential Health Effects
Eye:
Vapors cause eye irritation.
Skin:
May cause skin irritation. May be absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. May cause liver and kidney damage. The
toxicological properties of this substance have not been fully
investigated.
Inhalation:
Harmful if inhaled. The toxicological properties of this substance
have not been fully investigated. May cause dyspnea (difficult or
labored breathing). Vapors cause irritation of the respiratory
system.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic
selenium poisoning is characterized by loss of hair and nails, skin
lesions, and abnormalities of the nervous system.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting
unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical aid.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Use water spray, dry chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Do not breathe dust, vapor, mist, or
gas. Do not get in eyes, on skin, or on clothing. Do not ingest or
inhale. Use only in a chemical fume hood. Wash clothing before
reuse.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use only under a
chemical fume hood.
Exposure Limits
CAS# 1132-39-4:
United Kingdom, WEL - TWA: (listed as selenium compounds): 0.1 mg
TWA (except hydrogen selenide, as Se)
United Kingdom, WEL - STEL: (listed as selenium compounds): 0.3 m
STEL (except hydrogen selenide, as Se)
United States OSHA: 0.2 mg/m3 TWA (as Se) (listed under Selenium
compounds).
Belgium - TWA: (listed as selenium compounds): 0.2 mg/m3 VLE (as
Japan: (listed as selenium compounds): 0.1 mg/m3 OEL (except SeH2
SeF6, as Se)
Malaysia: (listed as selenium compounds): 0.2 mg/m3 TWA (as Se)
Netherlands: (listed as selenium compounds): 0.1 mg/m3 MAC (as Se
Spain: (listed as selenium compounds): 0.1 mg/m3 VLA-ED (except
hydrogen selenide, as Se)
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 115 - 117 deg C @ 1.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 230 deg F (> 110.00 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.3380g/cm3
Molecular Formula: C12H10Se
Molecular Weight: 233.17
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, selenium/selenium oxides.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1132-39-4: SX1825000
LD50/LC50:
CAS# 1132-39-4: Oral, rat: LD50 = 360 mg/kg.
Carcinogenicity:
Diphenylselenide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/25 Toxic by inhalation and if swallowed.
R 33 Danger of cumulative effects.
Safety Phrases:
S 20/21 When using do not eat, drink or smoke.
S 28A After contact with skin, wash immediately with
plenty of water.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1132-39-4: No information available.
Canada
CAS# 1132-39-4 is listed on Canada's NDSL List.
CAS# 1132-39-4 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1132-39-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #3 Date: 12/03/2002
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1,2-Propanediol, 99%
| 57-55-6 |
|
Ethyl 2-chloroacetoacetate, 97%
| 609-15-4 |
|
Pyridine, 99+%
| 110-86-1 |
|
Pyridine, nonaqueous titration grade
| 110-86-1 |
|
Pyridine, reagent ACS
| 110-86-1 |
|
2-(4-Sulfophenylazo)1,8-Dihydroxy-3,6-Naphthalenedisulfonic Acid
| 23647-14-5 |
|
trans-4-Phenyl-3-buten-2-one, p.a.
| 1896-62-4 |
|
Pyrogallol, 99%
| 87-66-1 |
|
Quinoline, 96%
| 91-22-5 |
|
Quinoline, synthetic, 99% (gc)
| 91-22-5 |
|
p-Benzoquinone
| 106-51-4 |
|
Resorcinol, 98%
| 108-46-3 |
|
Rubidium Chloride, 99.8+%
| 7791-11-9 |
|
Sodium Hydride, 60% Dispersion in Mineral Oil, Toluene Soluble Bags
| 7646-69-7 |
|
Salicylic Acid, 99+%
| 69-72-7 |
|
3-Indazolinone, 97%
| 7364-25-2 |
|
Cellulose Acetate Propionate, Average M.W. 15000
| 9004-39-1 |
|
Cellulose Acetate Propionate, Average M.W. 75000
| 9004-39-1 |
|
Diphenylselenide, 95%
| 1132-39-4 |
|
Silver acetate, 99%
| 563-63-3 |
|
Diethyldithiocarbamic Acid, Silver Salt, 99%
| 1470-61-7 |
|
Silver Iodide, 99.999%
| 7783-96-2 |
|
Silver nitrate, 0.1N standard solution
| 7732-18-5 |
|
Silver nitrate, reagent ACS, electrophoresis grade
| 7761-88-8 |
|
Silver nitrate, ultrapure grade
| 7761-88-8 |
|
Silver(I) oxide, 99+%
| 20667-12-3 |
|
Silver sulfate, 99%
| 10294-26-5 |
|
Acetic Acid, Sodium Salt, Anhydrous, U.S.P./N.F.
| 127-09-3 |
|
Acetic Acid, Sodium Salt, Anhydrous, Reagent acs (crystals)
| 127-09-3 |
|
Acetic acid, sodium salt, trihydrate pure
| 6131-90-4 |
|
Acetic acid, sodium acetate trihydrate, reagent acs (crystals)
| 6131-90-4 |
|
1,3-Diacetoxybenzene, 99%
| 108-58-7 |
|
Sodium Bicarbonate, C.P.
| 144-55-8 |
|
Sodium Bicarbonate, Reagent ACS (Powder)
| 144-55-8 |
|
Sodium Bromide, Anhydrous, 99+%
| 7647-15-6 |
|
Sodium carbonate, anhydrous 99.95 to 100.05%
| 497-19-8 |
|
Sodium Carbonate, Anhydrous Powder, P.A.
| 497-19-8 |
|
Betaine, anhydrous, 98%
| 107-43-7 |
|
Sodium Carbonate, Anhydrous, Reagent ACS (Powder)
| 497-19-8 |
|
Sodium Chloride, P.A.
| 7647-14-5 |
|
Triphenyl phosphite, 97%
| 101-02-0 |
|
Sodium Cyanide, P.A.
| 143-33-9 |
|
Dimethyl malonate, 97%
| 108-59-8 |
|
Sodium fluoride, 97%
| 7681-49-4 |
|
Sodium fluoride, reagent ACS, powder
| 7681-49-4 |
|
Sodium Hydrosulfite, Tech., ca 85%
| 7775-14-6 |
|
Sodium Iodate, P.A.
| 7681-55-2 |
|
Desoxycorticosterone
| 64-85-7 |
|
Sodium metabisulfite, anhydrous, 97%
| 7446-09-5 |
|
Sodium Methoxide, 30 wt% Solution in Methanol
| 67-56-1 |
|
|