Search   
MSDS 
:
 Acetic acid, sodium salt, trihydrate pure
CAS 
:
 6131-90-4
SYNONYMS 
:
 Sodium salt; Sodium acetate trihydrate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6131-90-4 |Sodium acetate,Trihydrate | 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Inhalation:
No hazard expected in normal industrial use.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Combustion generates toxic fumes.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing.
Storage:
Store in a cool, dry place. Keep from contact with oxidizing
materials.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Good general ventilation should be sufficient to control airborne
levels.
Personal Protective Equipment

Eyes:
Wear safety glasses with side shields.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Appearance: white
Odor: odorless
pH: 8.9 (0.1M Solution)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 253 deg F
Freezing/Melting Point: 136 deg F
Autoignition Temperature: 599 deg C ( 1,110.20 deg F)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water, ether
Specific Gravity/Density: 1.45
Molecular Formula: C2H3O2Na.3H2O
Molecular Weight: 136.08

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizers
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6131-90-4: AJ4580000
LD50/LC50:
Not available.
Carcinogenicity:
Sodium acetate,Trihydrate -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Actue aquatic effects (for anhydrous sodium acetate) 96-hour LC50;
Fathead minnow: GT 100 mg/L 96-hour LC50; Water flea: GT 1000 mg/L
This chemical has a high biological oxygen demand, and it is expected
to cause significant oxygen depletion in aquatic systems. It has a
low potential affect aquatic organisms.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Shipping Name: Not regulated.
Dangerous Goods Code:
UN Number:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 6131-90-4: 1
United Kingdom Occupational Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6131-90-4 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 6131-90-4 is not on the TSCA Inventory. It is a hydrate and
exempt from TSCA Inventory requirements (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/08/1999 Revision #1 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,2-Propanediol, 99% 57-55-6
Ethyl 2-chloroacetoacetate, 97% 609-15-4
Pyridine, 99+% 110-86-1
Pyridine, nonaqueous titration grade 110-86-1
Pyridine, reagent ACS 110-86-1
2-(4-Sulfophenylazo)1,8-Dihydroxy-3,6-Naphthalenedisulfonic Acid 23647-14-5
trans-4-Phenyl-3-buten-2-one, p.a. 1896-62-4
Pyrogallol, 99% 87-66-1
Quinoline, 96% 91-22-5
Quinoline, synthetic, 99% (gc) 91-22-5
p-Benzoquinone 106-51-4
Resorcinol, 98% 108-46-3
Rubidium Chloride, 99.8+% 7791-11-9
Sodium Hydride, 60% Dispersion in Mineral Oil, Toluene Soluble Bags 7646-69-7
Salicylic Acid, 99+% 69-72-7
3-Indazolinone, 97% 7364-25-2
Cellulose Acetate Propionate, Average M.W. 15000 9004-39-1
Cellulose Acetate Propionate, Average M.W. 75000 9004-39-1
Diphenylselenide, 95% 1132-39-4
Silver acetate, 99% 563-63-3
Diethyldithiocarbamic Acid, Silver Salt, 99% 1470-61-7
Silver Iodide, 99.999% 7783-96-2
Silver nitrate, 0.1N standard solution 7732-18-5
Silver nitrate, reagent ACS, electrophoresis grade 7761-88-8
Silver nitrate, ultrapure grade 7761-88-8
Silver(I) oxide, 99+% 20667-12-3
Silver sulfate, 99% 10294-26-5
Acetic Acid, Sodium Salt, Anhydrous, U.S.P./N.F. 127-09-3
Acetic Acid, Sodium Salt, Anhydrous, Reagent acs (crystals) 127-09-3
Acetic acid, sodium salt, trihydrate pure 6131-90-4
Acetic acid, sodium acetate trihydrate, reagent acs (crystals) 6131-90-4
1,3-Diacetoxybenzene, 99% 108-58-7
Sodium Bicarbonate, C.P. 144-55-8
Sodium Bicarbonate, Reagent ACS (Powder) 144-55-8
Sodium Bromide, Anhydrous, 99+% 7647-15-6
Sodium carbonate, anhydrous 99.95 to 100.05% 497-19-8
Sodium Carbonate, Anhydrous Powder, P.A. 497-19-8
Betaine, anhydrous, 98% 107-43-7
Sodium Carbonate, Anhydrous, Reagent ACS (Powder) 497-19-8
Sodium Chloride, P.A. 7647-14-5
Triphenyl phosphite, 97% 101-02-0
Sodium Cyanide, P.A. 143-33-9
Dimethyl malonate, 97% 108-59-8
Sodium fluoride, 97% 7681-49-4
Sodium fluoride, reagent ACS, powder 7681-49-4
Sodium Hydrosulfite, Tech., ca 85% 7775-14-6
Sodium Iodate, P.A. 7681-55-2
Desoxycorticosterone 64-85-7
Sodium metabisulfite, anhydrous, 97% 7446-09-5
Sodium Methoxide, 30 wt% Solution in Methanol 67-56-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net