Search   
MSDS 
:
 1,3-Diacetoxybenzene, 99%
CAS 
:
 108-58-7
SYNONYMS 
:
 Resorcinol diacetate; 1,3-Benzenediol, diacetate;     1,3-Dihydroxybenzene diacetate; m-Phenylene di(acetate);     m-Phenylenediacetate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 108-58-7 |1,3-Diacetoxybenzene | 99 | 203-596-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Moisture sensitive.

Potential Health Effects
Eye:
Causes severe eye irritation and possible burns. May cause
chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Do NOT get water inside containers. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Cover with sand, dry lime or soda ash and place in a closed
container for disposal. Provide ventilation. Do not get water inside
containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Use with adequate
ventilation. Do not allow contact with water. Keep from contact with
moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 108-58-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Viscous liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 146 deg C @ 12.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 110 deg C ( 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: hydrolysis in water
Specific Gravity/Density: 1.1780g/cm3
Molecular Formula: C10H10O4
Molecular Weight: 194.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, moisture, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 108-58-7: VH0580000
LD50/LC50:
CAS# 108-58-7: Draize test, rabbit, eye: 5% Severe.
Carcinogenicity:
1,3-Diacetoxybenzene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 108-58-7: No information available.
Canada
CAS# 108-58-7 is listed on Canada's NDSL List.
CAS# 108-58-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 108-58-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,2-Propanediol, 99% 57-55-6
Ethyl 2-chloroacetoacetate, 97% 609-15-4
Pyridine, 99+% 110-86-1
Pyridine, nonaqueous titration grade 110-86-1
Pyridine, reagent ACS 110-86-1
2-(4-Sulfophenylazo)1,8-Dihydroxy-3,6-Naphthalenedisulfonic Acid 23647-14-5
trans-4-Phenyl-3-buten-2-one, p.a. 1896-62-4
Pyrogallol, 99% 87-66-1
Quinoline, 96% 91-22-5
Quinoline, synthetic, 99% (gc) 91-22-5
p-Benzoquinone 106-51-4
Resorcinol, 98% 108-46-3
Rubidium Chloride, 99.8+% 7791-11-9
Sodium Hydride, 60% Dispersion in Mineral Oil, Toluene Soluble Bags 7646-69-7
Salicylic Acid, 99+% 69-72-7
3-Indazolinone, 97% 7364-25-2
Cellulose Acetate Propionate, Average M.W. 15000 9004-39-1
Cellulose Acetate Propionate, Average M.W. 75000 9004-39-1
Diphenylselenide, 95% 1132-39-4
Silver acetate, 99% 563-63-3
Diethyldithiocarbamic Acid, Silver Salt, 99% 1470-61-7
Silver Iodide, 99.999% 7783-96-2
Silver nitrate, 0.1N standard solution 7732-18-5
Silver nitrate, reagent ACS, electrophoresis grade 7761-88-8
Silver nitrate, ultrapure grade 7761-88-8
Silver(I) oxide, 99+% 20667-12-3
Silver sulfate, 99% 10294-26-5
Acetic Acid, Sodium Salt, Anhydrous, U.S.P./N.F. 127-09-3
Acetic Acid, Sodium Salt, Anhydrous, Reagent acs (crystals) 127-09-3
Acetic acid, sodium salt, trihydrate pure 6131-90-4
Acetic acid, sodium acetate trihydrate, reagent acs (crystals) 6131-90-4
1,3-Diacetoxybenzene, 99% 108-58-7
Sodium Bicarbonate, C.P. 144-55-8
Sodium Bicarbonate, Reagent ACS (Powder) 144-55-8
Sodium Bromide, Anhydrous, 99+% 7647-15-6
Sodium carbonate, anhydrous 99.95 to 100.05% 497-19-8
Sodium Carbonate, Anhydrous Powder, P.A. 497-19-8
Betaine, anhydrous, 98% 107-43-7
Sodium Carbonate, Anhydrous, Reagent ACS (Powder) 497-19-8
Sodium Chloride, P.A. 7647-14-5
Triphenyl phosphite, 97% 101-02-0
Sodium Cyanide, P.A. 143-33-9
Dimethyl malonate, 97% 108-59-8
Sodium fluoride, 97% 7681-49-4
Sodium fluoride, reagent ACS, powder 7681-49-4
Sodium Hydrosulfite, Tech., ca 85% 7775-14-6
Sodium Iodate, P.A. 7681-55-2
Desoxycorticosterone 64-85-7
Sodium metabisulfite, anhydrous, 97% 7446-09-5
Sodium Methoxide, 30 wt% Solution in Methanol 67-56-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net