Search   
MSDS 
:
 Silver(I) oxide, 99+%
CAS 
:
 20667-12-3
SYNONYMS 
:
 Argentous oxide; Disilver oxide; Silver(1+) oxide
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 20667-12-3 |Silver oxide (Ag2O) | 99+ | 243-957-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Light sensitive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns.
Skin:
May cause severe irritation and possible burns.
Ingestion:
Harmful if swallowed. May cause severe gastrointestinal tract
irritation with nausea, vomiting and possible burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema.
Chronic:
Chronic inhalation or ingestion of silver salts may cause argyria
characterized by a permanent blue-gray discoloration of the eyes,
skin, mucous membranes, and internal organs. This malady results
from the accumulation of silver in the body.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Strong oxidizer. Contact with other material may
cause fire. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Wear appropriate
protective clothing to prevent contact with skin and eyes. Wear a
self-contained breathing apparatus (SCBA) to prevent contact with
thermal decomposition products.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Remove all sources of
ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Keep container tightly
closed. Avoid contact with clothing and other combustible materials.
Do not get on skin or in eyes. Avoid ingestion and inhalation. Do not
ingest or inhale. Store protected from light. Do not store near
combustible materials.
Storage:
Keep away from sources of ignition. Do not store near combustible
materials. Store in a tightly closed container. Store in a cool,
dry, well-ventilated area away from incompatible substances. Store
protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 20667-12-3:

Japan: (listed as silver compounds): 0.01 mg/m3 OEL (as Ag)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure. Wear impervious gloves.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: black
Odor: Odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: decomposes
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 200 deg C
Solubility in water: slightly soluble
Specific Gravity/Density: 7.22 g/cm3
Molecular Formula: Ag2O
Molecular Weight: 231.74

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable. Absorbs carbon dioxide from the air.
Conditions to Avoid:
Incompatible materials, light, combustible materials, organic
materials, reducing agents.
Incompatibilities with Other Materials:
Cupric oxide, ammonia + ethanol, hydrazine + ethanol, carbon
monoxide, hydrogen sulfide, magnesium, auric sulfide, seleninyl
chloride, tin, sulfides (inorganic, e.g. ferric sulfide, lead
sulfide, sodium sulfide), mercury sulfide, nitroalkanes, selenium,
sulfur, potassium, phosphorus, sodium, sodium potassium.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, oxygen, silver fumes.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 20667-12-3: VW4900000
LD50/LC50:
CAS# 20667-12-3: Oral, mouse: LD50 = 1027 mg/kg; Oral, rat: LD50 =
2820 mg/kg.
Carcinogenicity:
Silver oxide (Ag2O) -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 20667-12-3: 1
Canada
CAS# 20667-12-3 is listed on Canada's DSL List.
CAS# 20667-12-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 20667-12-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,2-Propanediol, 99% 57-55-6
Ethyl 2-chloroacetoacetate, 97% 609-15-4
Pyridine, 99+% 110-86-1
Pyridine, nonaqueous titration grade 110-86-1
Pyridine, reagent ACS 110-86-1
2-(4-Sulfophenylazo)1,8-Dihydroxy-3,6-Naphthalenedisulfonic Acid 23647-14-5
trans-4-Phenyl-3-buten-2-one, p.a. 1896-62-4
Pyrogallol, 99% 87-66-1
Quinoline, 96% 91-22-5
Quinoline, synthetic, 99% (gc) 91-22-5
p-Benzoquinone 106-51-4
Resorcinol, 98% 108-46-3
Rubidium Chloride, 99.8+% 7791-11-9
Sodium Hydride, 60% Dispersion in Mineral Oil, Toluene Soluble Bags 7646-69-7
Salicylic Acid, 99+% 69-72-7
3-Indazolinone, 97% 7364-25-2
Cellulose Acetate Propionate, Average M.W. 15000 9004-39-1
Cellulose Acetate Propionate, Average M.W. 75000 9004-39-1
Diphenylselenide, 95% 1132-39-4
Silver acetate, 99% 563-63-3
Diethyldithiocarbamic Acid, Silver Salt, 99% 1470-61-7
Silver Iodide, 99.999% 7783-96-2
Silver nitrate, 0.1N standard solution 7732-18-5
Silver nitrate, reagent ACS, electrophoresis grade 7761-88-8
Silver nitrate, ultrapure grade 7761-88-8
Silver(I) oxide, 99+% 20667-12-3
Silver sulfate, 99% 10294-26-5
Acetic Acid, Sodium Salt, Anhydrous, U.S.P./N.F. 127-09-3
Acetic Acid, Sodium Salt, Anhydrous, Reagent acs (crystals) 127-09-3
Acetic acid, sodium salt, trihydrate pure 6131-90-4
Acetic acid, sodium acetate trihydrate, reagent acs (crystals) 6131-90-4
1,3-Diacetoxybenzene, 99% 108-58-7
Sodium Bicarbonate, C.P. 144-55-8
Sodium Bicarbonate, Reagent ACS (Powder) 144-55-8
Sodium Bromide, Anhydrous, 99+% 7647-15-6
Sodium carbonate, anhydrous 99.95 to 100.05% 497-19-8
Sodium Carbonate, Anhydrous Powder, P.A. 497-19-8
Betaine, anhydrous, 98% 107-43-7
Sodium Carbonate, Anhydrous, Reagent ACS (Powder) 497-19-8
Sodium Chloride, P.A. 7647-14-5
Triphenyl phosphite, 97% 101-02-0
Sodium Cyanide, P.A. 143-33-9
Dimethyl malonate, 97% 108-59-8
Sodium fluoride, 97% 7681-49-4
Sodium fluoride, reagent ACS, powder 7681-49-4
Sodium Hydrosulfite, Tech., ca 85% 7775-14-6
Sodium Iodate, P.A. 7681-55-2
Desoxycorticosterone 64-85-7
Sodium metabisulfite, anhydrous, 97% 7446-09-5
Sodium Methoxide, 30 wt% Solution in Methanol 67-56-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net