Search   
MSDS 
:
 1-Dimethylamino-2-propanol, 99%
CAS 
:
 108-16-7
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 108-16-7 |1-Dimethylamino-2-propanol | 99% | 203-556-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful if swallowed. Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Harmful if absorbed through the skin. Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do NOT induce vomiting and seek IMMEDIATE MEDICAL ADVICE.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Will burn if involved in a fire. Flammable liquid and vapor.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use spark-proof tools and explosion proof equipment. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a dry area. Flammables-area. Store at around
20C.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low. Use adequate
general or local explosion-proof ventilation to keep airborne levels
to acceptable levels.
Exposure Limits
CAS# 108-16-7:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: amine-like
pH: 12.1(100g/l aq.sol.)
Vapor Pressure: 14.53 mbar @20 deg
Viscosity: 4.9 mPa.s@50 deg C
Boiling Point: 126 deg C @760 mmHg
Freezing/Melting Point: -85 deg C
Autoignition Temperature: 225 deg C ( 437.00 deg F)
Flash Point: 26 deg C ( 78.80 deg F)
Explosion Limits, lower: 2.70 vol %
Explosion Limits, upper: 11.10 vol %
Decomposition Temperature:
Solubility in water: Freely Soluble.
Specific Gravity/Density: 0.85g/cm3
Molecular Formula: C5H13NO
Molecular Weight: 103.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, ignition sources.
Incompatibilities with Other Materials:
Oxidizing agents, acids, amines.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 108-16-7: UB3150000
LD50/LC50:
CAS# 108-16-7: Draize test, rabbit, eye: 5 uL Severe; Draize test,
rabbit, skin: 500 mg Moderate; Oral, rat: LD50 = 1739 mg/kg; Skin,
rabbit: LD50 = 1040 mg/kg.
Carcinogenicity:
1-Dimethylamino-2-propanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.*
Hazard Class: 8 (3)
UN Number: 2920
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8 (3)
UN Number: 2920
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 108-16-7: 1
Canada
CAS# 108-16-7 is listed on Canada's DSL List.
CAS# 108-16-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 108-16-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/02/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Hydroxy-2-quinoxalinecarboxylic acid 1204-75-7
(-)-Chloromethyl menthyl ether, 95% (GC), 97+% e.e. 26127-08-2
Ethyl L-Lactate (Pract), 90% (GC) 687-47-8
1,2,3,4-Tetrahydronaphthalene 119-64-2
Methyl sulfide, 99+% 75-18-3
Tetramethylammonium chloride, 98+% 75-57-0
2-Thiophene acetyl chloride, 99% 39098-97-0
Silver Perchlorate Hydrate, 99% 14242-05-8
Triphenyl phosphate, 99+% 115-86-6
4-Aminophthalonitrile 56765-79-8
Nickel Phthalocyanine, 95% (Titr.) 14055-02-8
Methyl P-Toluate 99-75-2
(+)-P-Menth-1-En-9-Ol, 97% 13835-75-1
Tetrapropylammonium hydroxide (25% in water) 4499-86-9
2,4-Dibromoaniline, 98% 615-57-6
Tert.-Butylbenzene, 99% 98-06-6
1,3-Dichloro-2-fluorobenzene, 98+% 2268-05-5
Benzamide (pract) 55-21-0
N-n-Butyldiethanolamine, 98% 102-79-4
Thiosalicylic Acid (Pract), 90% (Titr.) 147-93-3
3-Hydroxypicolinamide, 98+% 933-90-4
Dodecyltrimethylammonium chloride, 98% 112-00-5
Cyclohexene Sulfide, tech., ca.85% 286-28-2
1-(3,4-Dichlorophenyl)-1-Propanone, 99% 6582-42-9
4-Pentylphenol, 99% (GC) 14938-35-3
4-Iodobenzoic acid, 93% (titr.) 619-58-9
Methyl-Beta-D-Glucopyranoside Hemihydrate ,99% 709-50-2
N-Phenylglycine Ethyl Ester, 99% (Titr.) 2216-92-4
1-Phenylpyrazole, 99% (gc) 1126-00-7
2-Amino-3-Nitropyridine, 99% 4214-75-9
Thioacetamide, reagent ACS, 99+% 62-55-5
1-Dimethylamino-2-propanol, 99% 108-16-7
2,5-Dichloro-p-benzoquinone 615-93-0
2,3-Dimethyl-2-Butanol, 98% 594-60-5
Methylmalonic Acid, 96% 516-05-2
5-Aminovaleric Acid, 97% 660-88-8
Palladium on Barium Sulfate (5% Pd) 7440-05-3
Thioglycolic acid 68-11-1
1,3,5-Trimethoxybenzene, 99% 621-23-8
5-Methyl-2-hexanone 99% 110-12-3
Puromycin dihydrochloride hydrate 58-58-2
tert-Butyl ethyl ether, 97% 637-92-3
p-Anisidine 90-04-0
Harmine Hydrochloride Hydrate 343-27-1
3-Nonanone, 98% 925-78-0
N-Ethylcarbazole, 98.5% 86-28-2
(s,s)-jacobsen catalyst, 98% 135620-04-1
Thiourea 62-56-6
2-Chloro-5-Fluoronitrobenzene, 99+% 345-17-5
2,4-Dimethylanisole, 99% 6738-23-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net