**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 115-86-6 |Triphenyl phosphate | 98.0 | 204-112-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Non-combustible, substance itself does not burn but may decompose
upon heating to produce corrosive and/or toxic fumes.
Extinguishing Media:
Use carbon dioxide or dry chemical. Use agent most appropriate to
extinguish fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 115-86-6:
United Kingdom, OES - TWA: 3 mg/m3 TWA
United Kingdom, OES - STEL: 6 mg/m3 STEL
United States OSHA: 3 mg/m3 TWA
Belgium - TWA: 3 mg/m3 VLE
France - VME: 3 mg/m3 VME
Germany: 3 mg/m3 TWA (inhalable fraction)
Malaysia: 3 mg/m3 TWA
Netherlands: 3 mg/m3 MAC
Russia: 1 mg/m3 TWA
Spain: 3 mg/m3 VLA-ED
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 1.3 hPa @ 193 C
Viscosity: Not available.
Boiling Point: 245 deg C
Freezing/Melting Point: 49 deg C
Autoignition Temperature: 500 deg C ( 932.00 deg F)
Flash Point: 428 deg F ( 220.00 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble in water.
Specific Gravity/Density: 1.3
Molecular Formula: C18 H15 O4 P
Molecular Weight: 326.30
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Phosphine, carbon monoxide, oxides of phosphorus, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 115-86-6: TC8400000
LD50/LC50:
CAS# 115-86-6: Dermal, guinea pig: LD50 = >4 gm/kg; Oral, mouse:
LD50 = 1320 mg/kg; Oral, rat: LD50 = 3500 mg/kg; Skin, rabbit: LD50 =
>7900 mg/kg.
Carcinogenicity:
Triphenyl phosphate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Ecotoxicity:
Fish: Rainbow trout: LC50 = 0.3 mg/L; 96 Hr.; UnspecifiedFish:
Fathead Minnow: LC50 = 0.87 mg/L; 96 Hr.; Flow-throughFish:
Bluegill/Sunfish: LC50 = 290.0 mg/L; 96 Hr.; Static ConditionWater
flea Daphnia: EC50 = 1.0 mg/L; 48 Hr.; Unspecified
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 115-86-6: 2
Canada
CAS# 115-86-6 is listed on Canada's DSL List.
CAS# 115-86-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 115-86-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 6/10/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
3-Hydroxy-2-quinoxalinecarboxylic acid
| 1204-75-7 |
|
(-)-Chloromethyl menthyl ether, 95% (GC), 97+% e.e.
| 26127-08-2 |
|
Ethyl L-Lactate (Pract), 90% (GC)
| 687-47-8 |
|
1,2,3,4-Tetrahydronaphthalene
| 119-64-2 |
|
Methyl sulfide, 99+%
| 75-18-3 |
|
Tetramethylammonium chloride, 98+%
| 75-57-0 |
|
2-Thiophene acetyl chloride, 99%
| 39098-97-0 |
|
Silver Perchlorate Hydrate, 99%
| 14242-05-8 |
|
Triphenyl phosphate, 99+%
| 115-86-6 |
|
4-Aminophthalonitrile
| 56765-79-8 |
|
Nickel Phthalocyanine, 95% (Titr.)
| 14055-02-8 |
|
Methyl P-Toluate
| 99-75-2 |
|
(+)-P-Menth-1-En-9-Ol, 97%
| 13835-75-1 |
|
Tetrapropylammonium hydroxide (25% in water)
| 4499-86-9 |
|
2,4-Dibromoaniline, 98%
| 615-57-6 |
|
Tert.-Butylbenzene, 99%
| 98-06-6 |
|
1,3-Dichloro-2-fluorobenzene, 98+%
| 2268-05-5 |
|
Benzamide (pract)
| 55-21-0 |
|
N-n-Butyldiethanolamine, 98%
| 102-79-4 |
|
Thiosalicylic Acid (Pract), 90% (Titr.)
| 147-93-3 |
|
3-Hydroxypicolinamide, 98+%
| 933-90-4 |
|
Dodecyltrimethylammonium chloride, 98%
| 112-00-5 |
|
Cyclohexene Sulfide, tech., ca.85%
| 286-28-2 |
|
1-(3,4-Dichlorophenyl)-1-Propanone, 99%
| 6582-42-9 |
|
4-Pentylphenol, 99% (GC)
| 14938-35-3 |
|
4-Iodobenzoic acid, 93% (titr.)
| 619-58-9 |
|
Methyl-Beta-D-Glucopyranoside Hemihydrate ,99%
| 709-50-2 |
|
N-Phenylglycine Ethyl Ester, 99% (Titr.)
| 2216-92-4 |
|
1-Phenylpyrazole, 99% (gc)
| 1126-00-7 |
|
2-Amino-3-Nitropyridine, 99%
| 4214-75-9 |
|
Thioacetamide, reagent ACS, 99+%
| 62-55-5 |
|
1-Dimethylamino-2-propanol, 99%
| 108-16-7 |
|
2,5-Dichloro-p-benzoquinone
| 615-93-0 |
|
2,3-Dimethyl-2-Butanol, 98%
| 594-60-5 |
|
Methylmalonic Acid, 96%
| 516-05-2 |
|
5-Aminovaleric Acid, 97%
| 660-88-8 |
|
Palladium on Barium Sulfate (5% Pd)
| 7440-05-3 |
|
Thioglycolic acid
| 68-11-1 |
|
1,3,5-Trimethoxybenzene, 99%
| 621-23-8 |
|
5-Methyl-2-hexanone 99%
| 110-12-3 |
|
Puromycin dihydrochloride hydrate
| 58-58-2 |
|
tert-Butyl ethyl ether, 97%
| 637-92-3 |
|
p-Anisidine
| 90-04-0 |
|
Harmine Hydrochloride Hydrate
| 343-27-1 |
|
3-Nonanone, 98%
| 925-78-0 |
|
N-Ethylcarbazole, 98.5%
| 86-28-2 |
|
(s,s)-jacobsen catalyst, 98%
| 135620-04-1 |
|
Thiourea
| 62-56-6 |
|
2-Chloro-5-Fluoronitrobenzene, 99+%
| 345-17-5 |
|
2,4-Dimethylanisole, 99%
| 6738-23-4 |
|
|