Search   
MSDS 
:
 M_Dibromobenzene, 97%
CAS 
:
 108-36-1
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 108-36-1 |M_Dibromobenzene, 97% | 97% | 203-574-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 108-36-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear slightly yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: 5 mm Hg @ 66 deg C
Viscosity: Not available.
Boiling Point: 218.0 - 219.0 deg C @ 760.00m
Freezing/Melting Point: -7 deg C
Autoignition Temperature: Not available.
Flash Point: 93 deg C ( 199.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 1.9520g/cm3
Molecular Formula: C6H4Br2
Molecular Weight: 235.91

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 108-36-1: CZ1790000
LD50/LC50:
CAS# 108-36-1: Oral, mouse: LD50 = 2250 mg/kg; Oral, mouse: LD50 =
2250 mg/kg.
Carcinogenicity:
M_Dibromobenzene, 97% -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 108-36-1: No information available.
Canada
CAS# 108-36-1 is listed on Canada's NDSL List.
CAS# 108-36-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 108-36-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/09/1998 Revision #3 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium Phopshate Tribasic Dodecahydrate 10101-89-0
o-Thiocresol, 97% 137-06-4
2,4-Hydroxy-3-Nitropyridine 89282-12-2
M_Dibromobenzene, 97% 108-36-1
Erbium Oxide, 99.9% 12061-16-4
2-Chlorotoluene, 98% 95-49-8
Dysprosium Oxide, 99.9% 1308-87-8
Europium Chloride Hexahydrate 13759-92-7
1,5-Cyclooctadiene, 99% (GC) 111-78-4
Cyanogen Bromide (in Acetonitrile) 75-05-8
Bis(Dimethylamino)Phosphorochloridate, Tech. 90% 1605-65-8
Europium Nitrate Hexahydrate 10031-53-5
Gadolinium Nitrate Pentahydrate 52788-53-1
Gadolinium Oxide, 99.9% 12064-62-9
Diaclear 5989-27-5
Dialene 5989-27-5
Decalcifying Solution I 7647-01-0
Decalcifying solution II 50-00-0
6-Chloropiperonyl Chloride, 99+% 23468-31-7
Decalcifying Solution III 64-18-6
Bouins fixative 50-00-0
Carsons buffered formaldehyde 10%
5-Chloro-1-pentyne, 98% 14267-92-6
Bromide Standard, 1 mg/L 7647-15-6
Ferric Alum Mix 7697-37-2
Chloride Colour Reagent 67-56-1
Gadolinium Chloride Hexahydrate 10138-52-0
7-Methoxy-3,7-dimethyloctanal, 98% 3613-30-7
Holmium (III) Nitrate Pentahydrate, 99.9% 14483-18-2
Holmium (III)Oxide, 99.9% 12055-23-1
Lanthanum Acetate Hydrate 100587-90-4
1,2-Dimethylimidazole, 98% 1739-84-0
Lanthanum(iii) Fluoride, Laser Grade 13709-36-9
2-Methyl-3-nitrobenzoic acid, 99% 1975-50-4
Lanthanum Oxide,99.99% 1312-81-8
Hexamethylphosphoramide, 99% 680-31-9
Lutetium Oxide, 99.99% 12032-20-1
Lutetium Nitrate Hexahydrate 7697-37-2
N-Hydroxybenzenesulfonamide, 97% 599-71-3
Neodynium Chloride Hexahydrate 13477-89-9
Neodymium Nitrate Hexahydrate 7697-37-2
Neodymium Fluoride Anhydrous 13709-42-7
N-Ethyl-2,3-Dioxopiperazine, 98+% 59702-31-7
Lead (II) Perchlorate Trihydrate, 95% 13453-62-8
Neodymium Oxide, 99.9% 1313-97-9
Praseodymium Nitrate, Hexahydrate 7697-37-2
Praseodymium(III)-Nitrate Pentahydrate 14483-17-1
Praseodymium Oxide, 99.9% 12037-29-5
Cerium (III) Acetate, Hydrate 17829-82-2
Cerium III Nitrate Hexahydrate 10108-73-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net