**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1739-84-0 |1,2-Dimethylimidazole | 98 | 217-101-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Combustible
liquid and vapor.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Remove all sources of
ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Do not get in eyes, on skin, or on
clothing. Keep container tightly closed. Discard contaminated shoes.
Do not breathe dust. Keep away from heat and flame.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1739-84-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Chunks
Color: clear to white
Odor: None reported.
pH: Not available.
Vapor Pressure: 1 mmHg @ 20 C
Viscosity: Not available.
Boiling Point: 204 deg C
Freezing/Melting Point: 29 - 30 deg C
Autoignition Temperature: 480 deg C ( 896.00 deg F)
Flash Point: 92 deg C ( 197.60 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: soluble in organic solvents
Specific Gravity/Density: 1.080 g/cm3
Molecular Formula: C5H8N2
Molecular Weight: 96.13
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 1739-84-0: NI4838854
LD50/LC50:
Not available.
Carcinogenicity:
1,2-Dimethylimidazole -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24 Avoid contact with skin.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 1739-84-0: No information available.
Canada
CAS# 1739-84-0 is listed on Canada's DSL List.
CAS# 1739-84-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1739-84-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 11/06/1998 Revision #3 Date: 4/07/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Sodium Phopshate Tribasic Dodecahydrate
| 10101-89-0 |
|
o-Thiocresol, 97%
| 137-06-4 |
|
2,4-Hydroxy-3-Nitropyridine
| 89282-12-2 |
|
M_Dibromobenzene, 97%
| 108-36-1 |
|
Erbium Oxide, 99.9%
| 12061-16-4 |
|
2-Chlorotoluene, 98%
| 95-49-8 |
|
Dysprosium Oxide, 99.9%
| 1308-87-8 |
|
Europium Chloride Hexahydrate
| 13759-92-7 |
|
1,5-Cyclooctadiene, 99% (GC)
| 111-78-4 |
|
Cyanogen Bromide (in Acetonitrile)
| 75-05-8 |
|
Bis(Dimethylamino)Phosphorochloridate, Tech. 90%
| 1605-65-8 |
|
Europium Nitrate Hexahydrate
| 10031-53-5 |
|
Gadolinium Nitrate Pentahydrate
| 52788-53-1 |
|
Gadolinium Oxide, 99.9%
| 12064-62-9 |
|
Diaclear
| 5989-27-5 |
|
Dialene
| 5989-27-5 |
|
Decalcifying Solution I
| 7647-01-0 |
|
Decalcifying solution II
| 50-00-0 |
|
6-Chloropiperonyl Chloride, 99+%
| 23468-31-7 |
|
Decalcifying Solution III
| 64-18-6 |
|
Bouins fixative
| 50-00-0 |
|
Carsons buffered formaldehyde 10%
| |
|
5-Chloro-1-pentyne, 98%
| 14267-92-6 |
|
Bromide Standard, 1 mg/L
| 7647-15-6 |
|
Ferric Alum Mix
| 7697-37-2 |
|
Chloride Colour Reagent
| 67-56-1 |
|
Gadolinium Chloride Hexahydrate
| 10138-52-0 |
|
7-Methoxy-3,7-dimethyloctanal, 98%
| 3613-30-7 |
|
Holmium (III) Nitrate Pentahydrate, 99.9%
| 14483-18-2 |
|
Holmium (III)Oxide, 99.9%
| 12055-23-1 |
|
Lanthanum Acetate Hydrate
| 100587-90-4 |
|
1,2-Dimethylimidazole, 98%
| 1739-84-0 |
|
Lanthanum(iii) Fluoride, Laser Grade
| 13709-36-9 |
|
2-Methyl-3-nitrobenzoic acid, 99%
| 1975-50-4 |
|
Lanthanum Oxide,99.99%
| 1312-81-8 |
|
Hexamethylphosphoramide, 99%
| 680-31-9 |
|
Lutetium Oxide, 99.99%
| 12032-20-1 |
|
Lutetium Nitrate Hexahydrate
| 7697-37-2 |
|
N-Hydroxybenzenesulfonamide, 97%
| 599-71-3 |
|
Neodynium Chloride Hexahydrate
| 13477-89-9 |
|
Neodymium Nitrate Hexahydrate
| 7697-37-2 |
|
Neodymium Fluoride Anhydrous
| 13709-42-7 |
|
N-Ethyl-2,3-Dioxopiperazine, 98+%
| 59702-31-7 |
|
Lead (II) Perchlorate Trihydrate, 95%
| 13453-62-8 |
|
Neodymium Oxide, 99.9%
| 1313-97-9 |
|
Praseodymium Nitrate, Hexahydrate
| 7697-37-2 |
|
Praseodymium(III)-Nitrate Pentahydrate
| 14483-17-1 |
|
Praseodymium Oxide, 99.9%
| 12037-29-5 |
|
Cerium (III) Acetate, Hydrate
| 17829-82-2 |
|
Cerium III Nitrate Hexahydrate
| 10108-73-3 |
|
|