**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13709-36-9 |Xenon difluoride | 99.5 | 237-251-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic.
Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
Dust may cause mechanical irritation. Effects of contact may be
delayed.
Ingestion:
May cause digestive tract disturbances.
Inhalation:
May cause respiratory tract irritation. Effects of inhalation may be
delayed.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at
least 15 minutes while removing contaminated clothing and shoes. Wash
clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Substance
is noncombustible. Containers may explode when heated.
Extinguishing Media:
Do NOT use straight streams of water. For small fires, use dry
chemical, carbon dioxide, or water spray. For large fires, use water
spray, fog or regular foam. Cool containers with flooding quantities
of water until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up
or absorb material, then place into a suitable clean, dry, closed
container for disposal. Avoid generating dusty conditions. Provide
ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Appearance: off-white
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 5.9360g/cm3
Molecular Formula: F3La
Molecular Weight: 195.91
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, hydrogen fluoride, fluorine.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 13709-36-9: ZE1294166
LD50/LC50:
CAS# 13709-36-9: Inhalation, mouse: LC50 = 445 mg/m3/2H; Oral,
mouse: LD50 = 90 mg/kg.
Carcinogenicity:
Xenon difluoride -
ACGIH: A4 - Not Classifiable as a Human Carcinogen (as F) (listed
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
No information available.
IMO
No information available.
RID/ADR
No information available.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 13709-36-9: No information available.
United Kingdom Occupational Exposure Limits
CAS# 13709-36-9: OES-United Kingdom, TWA (listed as ** undefined
**): as F: 2.5 mg/m3 TWA
Canada
CAS# 13709-36-9 is listed on Canada's NDSL List.
CAS# 13709-36-9 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 13709-36-9 (listed as ** undefined **): OEL-AUSTRALIA:TWA 2.5 mg(
F)/m3
OEL-BELGIUM:TWA 2.5 mg(F)/m3
OEL-CZECHOSLOVAKIA:TWA 1 mg(F)/m3;STEL 5 mg(F)/m3
OEL-DENMARK:TWA 2.5 mg(F)/m3
OEL-FINLAND:TWA 2.5 mg(F)/m3
OEL-FRANCE:TWA 2.5 mg(F)/m3
OEL-GERMANY:TWA 2.5 mg(F)/m3
OEL-HUNGARY:TWA 1 mg(F)/m3;STEL 2 mg(F)/m3
OEL-THE NETHERLANDS:TWA 2.5 mg(F)/m3
OEL-THE PHILIPPINES:TWA 2.5 mg(F)/m3
OEL-POLAND:TWA 1 mg(F)/m3
OEL-SWEDEN:TWA 2 mg(F)/m3
OEL-SWITZERLAND:TWA 1.8 ppm (1.5 mg(F)/m3);STEL 9.0 ppm
OEL-THAILAND:TWA 2.5 mg(F)/m3
OEL-TURKEY:TWA 2.5 mg(F)/m3
OEL-UNITED KINGDOM:TWA 2.5 mg(F)/m3
US FEDERAL
TSCA
CAS# 13709-36-9 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/29/1998 Revision #1 Date: 8/02/2000
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Sodium Phopshate Tribasic Dodecahydrate
| 10101-89-0 |
|
o-Thiocresol, 97%
| 137-06-4 |
|
2,4-Hydroxy-3-Nitropyridine
| 89282-12-2 |
|
M_Dibromobenzene, 97%
| 108-36-1 |
|
Erbium Oxide, 99.9%
| 12061-16-4 |
|
2-Chlorotoluene, 98%
| 95-49-8 |
|
Dysprosium Oxide, 99.9%
| 1308-87-8 |
|
Europium Chloride Hexahydrate
| 13759-92-7 |
|
1,5-Cyclooctadiene, 99% (GC)
| 111-78-4 |
|
Cyanogen Bromide (in Acetonitrile)
| 75-05-8 |
|
Bis(Dimethylamino)Phosphorochloridate, Tech. 90%
| 1605-65-8 |
|
Europium Nitrate Hexahydrate
| 10031-53-5 |
|
Gadolinium Nitrate Pentahydrate
| 52788-53-1 |
|
Gadolinium Oxide, 99.9%
| 12064-62-9 |
|
Diaclear
| 5989-27-5 |
|
Dialene
| 5989-27-5 |
|
Decalcifying Solution I
| 7647-01-0 |
|
Decalcifying solution II
| 50-00-0 |
|
6-Chloropiperonyl Chloride, 99+%
| 23468-31-7 |
|
Decalcifying Solution III
| 64-18-6 |
|
Bouins fixative
| 50-00-0 |
|
Carsons buffered formaldehyde 10%
| |
|
5-Chloro-1-pentyne, 98%
| 14267-92-6 |
|
Bromide Standard, 1 mg/L
| 7647-15-6 |
|
Ferric Alum Mix
| 7697-37-2 |
|
Chloride Colour Reagent
| 67-56-1 |
|
Gadolinium Chloride Hexahydrate
| 10138-52-0 |
|
7-Methoxy-3,7-dimethyloctanal, 98%
| 3613-30-7 |
|
Holmium (III) Nitrate Pentahydrate, 99.9%
| 14483-18-2 |
|
Holmium (III)Oxide, 99.9%
| 12055-23-1 |
|
Lanthanum Acetate Hydrate
| 100587-90-4 |
|
1,2-Dimethylimidazole, 98%
| 1739-84-0 |
|
Lanthanum(iii) Fluoride, Laser Grade
| 13709-36-9 |
|
2-Methyl-3-nitrobenzoic acid, 99%
| 1975-50-4 |
|
Lanthanum Oxide,99.99%
| 1312-81-8 |
|
Hexamethylphosphoramide, 99%
| 680-31-9 |
|
Lutetium Oxide, 99.99%
| 12032-20-1 |
|
Lutetium Nitrate Hexahydrate
| 7697-37-2 |
|
N-Hydroxybenzenesulfonamide, 97%
| 599-71-3 |
|
Neodynium Chloride Hexahydrate
| 13477-89-9 |
|
Neodymium Nitrate Hexahydrate
| 7697-37-2 |
|
Neodymium Fluoride Anhydrous
| 13709-42-7 |
|
N-Ethyl-2,3-Dioxopiperazine, 98+%
| 59702-31-7 |
|
Lead (II) Perchlorate Trihydrate, 95%
| 13453-62-8 |
|
Neodymium Oxide, 99.9%
| 1313-97-9 |
|
Praseodymium Nitrate, Hexahydrate
| 7697-37-2 |
|
Praseodymium(III)-Nitrate Pentahydrate
| 14483-17-1 |
|
Praseodymium Oxide, 99.9%
| 12037-29-5 |
|
Cerium (III) Acetate, Hydrate
| 17829-82-2 |
|
Cerium III Nitrate Hexahydrate
| 10108-73-3 |
|
|