Search   
MSDS 
:
 Ferric Alum Mix
CAS 
:
 7697-37-2
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7697-37-2 |Nitric acid | 13.9 | 231-714-2 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
|----------------|--------------------------------------|----------|-----------|
| 7783-83-7 |Ammonium iron(III) sulfate | 4.8 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the upper respiratory tract with
pain, burns, and inflammation.
Chronic:
Repeated inhalation may cause chronic bronchitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Discard contaminated clothing in a manner which limits further
exposure.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Antidote:
The use of Deferoxamine as a chelating agent should be determined
only by qualified medical personnel.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Wash area with soap and water.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container
for disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Use only
in a well-ventilated area. Do not get in eyes, on skin, or on
clothing. Do not ingest or inhale.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Keep away from reducing agents.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 7697-37-2:
United Kingdom, WEL - TWA: 2 ppm TWA; 5.2 mg/m3 TWA
United Kingdom, WEL - STEL: 4 ppm STEL; 10 mg/m3 STEL
United States OSHA: 2 ppm TWA; 5 mg/m3 TWA
Belgium - TWA: 2 ppm VLE; 5.3 mg/m3 VLE
Belgium - STEL: 4 ppm VLE; 10 mg/m3 VLE
France - VME: 2 ppm VME; 5 mg/m3 VME
France - VLE: 4 ppm VLE; 10 mg/m3 VLE
Germany: 2 ppm TWA; 5.2 mg/m3 TWA
Japan: 2 ppm OEL; 5.2 mg/m3 OEL
Malaysia: 2 ppm TWA; 5.2 mg/m3 TWA
Netherlands: 0.5 ppm STEL; 1.3 mg/m3 STEL
Russia: 2 mg/m3 TWA
Spain: 2 ppm VLA-ED; 5.2 mg/m3 VLA-ED
Spain: 4 ppm VLA-EC; 10 mg/m3 VLA-EC
CAS# 7732-18-5:

CAS# 7783-83-7:

Belgium - TWA: (listed as iron salts (soluble)): 1 mg/m3 VLE (as
Malaysia: (listed as iron salts (soluble)): 1 mg/m3 TWA (as Fe)
Netherlands: (listed as iron salts (soluble)): 1 mg/m3 MAC (as Fe
Spain: (listed as iron salts (soluble)): 1 mg/m3 VLA-ED (as Fe)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, reducing agents.
Incompatibilities with Other Materials:
Acids (organic, e.g. acetic acid, benzoic acid, formic acid,
methanoic acid, oxalic acid), alcohols and glycols (e.g. butyl
alcohol, ethanol, methanol, ethylene glycol), aldehydes (e.g.
acetaldehyde, acrolein, chloral hydrate, formaldehyde), amides (e.g.
butyramide, diethyltoluamide, dimethyl formamide), amines (aliphatic
and aromatic, e.g. dimethyl amine, propylamine, pyridine,
triethylamine), azo, diazo, and hydrazines (e.g. dimethyl hydrazine,
hydrazine, methyl hydrazine), carbamates (e.g. carbanolate,
carbofuran), caustics (e.g. ammonia, ammonium hydroxide, calcium
hydroxide, potassium hydroxide, sodium hydroxide), cyanides (e.g.
potassium cyanide, sodium cyanide), dithiocarbamates (e.g. ferbam,
maneb, metham, thiram), esters (e.g. butyl acetate, ethyl acetate,
propyl formate), ethers (e.g. dioxane, furfuran, tetrahydrofuran
(THF)), fluorides (inorganic, e.g. ammonium fluoride, calcium
fluoride, cesium fluoride), hydrocarbons (aromatic, e.g. benzene,
chrysene, cumene, toluene), halogenated organics (e.g.
dibromoethane, hexachlorobenzene, methyl chloride,
trichloroethylene), isocyanates (e.g. methyl isocyanate), ketones
(e.g. acetone, acetophenone, MEK, MIBK), mercaptans and other
organic sulfides (e.g. butyl mercaptan, carbon disulfide,
methanethiol), metals (alkali and alkaline, e.g. cesium, potassium,
sodium), metals as powders (e.g. hafnium, raney nickel), metals as
non-powders (e.g. brass, bronze, iron), metals and metal compounds
(toxic, e.g. beryllium, lead acetate, nickel carbonyl, tetraethyl
lead), nitrides (e.g. potassium nitride, sodium nitride), nitriles
(e.g. acetonitrile, methyl cyanide), nitro compounds (organic, e.g.
nitrobenzene, nitroglycerine, picric acid, trinitrotoluene),
hydrocarbons (aliphatic, unsaturated, e.g. cyclopentene, ethylene,
heptene), hydrocarbons (aliphatic, saturated, e.g. butane, heptane,
isooctane), peroxides and hydroperoxides (organic, e.g. acetyl
peroxide, benzoyl peroxide, butyl peroxide, methyl ethyl ketone
peroxide), ph.
Hazardous Decomposition Products:
Nitrogen oxides, oxides of nitrogen, oxides of sulfur, ammonia and/or
derivatives.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7697-37-2: QU5775000 QU5900000
CAS# 7732-18-5: ZC0110000
CAS# 7783-83-7: WS5900000
LD50/LC50:
CAS# 7697-37-2: Inhalation, rat: LC50 = 260 mg/m3/30M; Inhalation,
rat: LC50 = 130 mg/m3/4H; Inhalation, rat: LC50 = 67 ppm(NO2)/4H.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
CAS# 7783-83-7.
Carcinogenicity:
Nitric acid -
Not listed by ACGIH, IARC, or NTP.
Water -
Not listed by ACGIH, IARC, or NTP.
Ammonium iron(III) sulfate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, NOS
Hazard Class: 8
UN Number: 3264
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, NOS
Hazard Class: 8
UN Number: 3264
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, NOS
Hazard Class: 8
UN Number: 3264
Packing group: II
USA RQ: CAS# 7697-37-2: 1000 lb final RQ; 454 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 7697-37-2: 1
CAS# 7732-18-5: No information available.
CAS# 7783-83-7: 1
Canada
CAS# 7697-37-2 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 7697-37-2 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 7783-83-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7697-37-2 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.
CAS# 7783-83-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 9/29/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium Phopshate Tribasic Dodecahydrate 10101-89-0
o-Thiocresol, 97% 137-06-4
2,4-Hydroxy-3-Nitropyridine 89282-12-2
M_Dibromobenzene, 97% 108-36-1
Erbium Oxide, 99.9% 12061-16-4
2-Chlorotoluene, 98% 95-49-8
Dysprosium Oxide, 99.9% 1308-87-8
Europium Chloride Hexahydrate 13759-92-7
1,5-Cyclooctadiene, 99% (GC) 111-78-4
Cyanogen Bromide (in Acetonitrile) 75-05-8
Bis(Dimethylamino)Phosphorochloridate, Tech. 90% 1605-65-8
Europium Nitrate Hexahydrate 10031-53-5
Gadolinium Nitrate Pentahydrate 52788-53-1
Gadolinium Oxide, 99.9% 12064-62-9
Diaclear 5989-27-5
Dialene 5989-27-5
Decalcifying Solution I 7647-01-0
Decalcifying solution II 50-00-0
6-Chloropiperonyl Chloride, 99+% 23468-31-7
Decalcifying Solution III 64-18-6
Bouins fixative 50-00-0
Carsons buffered formaldehyde 10%
5-Chloro-1-pentyne, 98% 14267-92-6
Bromide Standard, 1 mg/L 7647-15-6
Ferric Alum Mix 7697-37-2
Chloride Colour Reagent 67-56-1
Gadolinium Chloride Hexahydrate 10138-52-0
7-Methoxy-3,7-dimethyloctanal, 98% 3613-30-7
Holmium (III) Nitrate Pentahydrate, 99.9% 14483-18-2
Holmium (III)Oxide, 99.9% 12055-23-1
Lanthanum Acetate Hydrate 100587-90-4
1,2-Dimethylimidazole, 98% 1739-84-0
Lanthanum(iii) Fluoride, Laser Grade 13709-36-9
2-Methyl-3-nitrobenzoic acid, 99% 1975-50-4
Lanthanum Oxide,99.99% 1312-81-8
Hexamethylphosphoramide, 99% 680-31-9
Lutetium Oxide, 99.99% 12032-20-1
Lutetium Nitrate Hexahydrate 7697-37-2
N-Hydroxybenzenesulfonamide, 97% 599-71-3
Neodynium Chloride Hexahydrate 13477-89-9
Neodymium Nitrate Hexahydrate 7697-37-2
Neodymium Fluoride Anhydrous 13709-42-7
N-Ethyl-2,3-Dioxopiperazine, 98+% 59702-31-7
Lead (II) Perchlorate Trihydrate, 95% 13453-62-8
Neodymium Oxide, 99.9% 1313-97-9
Praseodymium Nitrate, Hexahydrate 7697-37-2
Praseodymium(III)-Nitrate Pentahydrate 14483-17-1
Praseodymium Oxide, 99.9% 12037-29-5
Cerium (III) Acetate, Hydrate 17829-82-2
Cerium III Nitrate Hexahydrate 10108-73-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net