Search   
MSDS 
:
 o-Thiocresol, 97%
CAS 
:
 137-06-4
SYNONYMS 
:
 2-Methylthiophenol; o-Toluenethiol; 2-Methylbenzenethiol
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 137-06-4 |o-Thiocresol | 97 | 205-276-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Stench.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Causes eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
Causes skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
The toxicological properties of this substance have not been fully
investigated. Causes gastrointestinal tract irritation.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep container tightly closed. Keep away from
heat, sparks and flame. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low. Use
adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 137-06-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure. Wear appropriate protective
gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions. Follow the OSHA respirator regulations
found in 29 CFR 1910.134 or European Standard EN 149.
Use a NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear very slight brown
Odor: None reported.
pH: Not available.
Vapor Pressure: 0.65 mm Hg @ 25C
Viscosity: Not available.
Boiling Point: 195 deg C @ 760.00mmHg
Freezing/Melting Point: 10.00 - 12.00 deg C
Autoignition Temperature: Not available.
Flash Point: 63 deg C ( 145.40 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 1.0540g/cm3
Molecular Formula: C7H8S
Molecular Weight: 124.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 137-06-4: XT8750000
LD50/LC50:
Not available.
Carcinogenicity:
o-Thiocresol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 137-06-4: No information available.
Canada
CAS# 137-06-4 is listed on Canada's DSL List.
CAS# 137-06-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 137-06-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/20/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sodium Phopshate Tribasic Dodecahydrate 10101-89-0
o-Thiocresol, 97% 137-06-4
2,4-Hydroxy-3-Nitropyridine 89282-12-2
M_Dibromobenzene, 97% 108-36-1
Erbium Oxide, 99.9% 12061-16-4
2-Chlorotoluene, 98% 95-49-8
Dysprosium Oxide, 99.9% 1308-87-8
Europium Chloride Hexahydrate 13759-92-7
1,5-Cyclooctadiene, 99% (GC) 111-78-4
Cyanogen Bromide (in Acetonitrile) 75-05-8
Bis(Dimethylamino)Phosphorochloridate, Tech. 90% 1605-65-8
Europium Nitrate Hexahydrate 10031-53-5
Gadolinium Nitrate Pentahydrate 52788-53-1
Gadolinium Oxide, 99.9% 12064-62-9
Diaclear 5989-27-5
Dialene 5989-27-5
Decalcifying Solution I 7647-01-0
Decalcifying solution II 50-00-0
6-Chloropiperonyl Chloride, 99+% 23468-31-7
Decalcifying Solution III 64-18-6
Bouins fixative 50-00-0
Carsons buffered formaldehyde 10%
5-Chloro-1-pentyne, 98% 14267-92-6
Bromide Standard, 1 mg/L 7647-15-6
Ferric Alum Mix 7697-37-2
Chloride Colour Reagent 67-56-1
Gadolinium Chloride Hexahydrate 10138-52-0
7-Methoxy-3,7-dimethyloctanal, 98% 3613-30-7
Holmium (III) Nitrate Pentahydrate, 99.9% 14483-18-2
Holmium (III)Oxide, 99.9% 12055-23-1
Lanthanum Acetate Hydrate 100587-90-4
1,2-Dimethylimidazole, 98% 1739-84-0
Lanthanum(iii) Fluoride, Laser Grade 13709-36-9
2-Methyl-3-nitrobenzoic acid, 99% 1975-50-4
Lanthanum Oxide,99.99% 1312-81-8
Hexamethylphosphoramide, 99% 680-31-9
Lutetium Oxide, 99.99% 12032-20-1
Lutetium Nitrate Hexahydrate 7697-37-2
N-Hydroxybenzenesulfonamide, 97% 599-71-3
Neodynium Chloride Hexahydrate 13477-89-9
Neodymium Nitrate Hexahydrate 7697-37-2
Neodymium Fluoride Anhydrous 13709-42-7
N-Ethyl-2,3-Dioxopiperazine, 98+% 59702-31-7
Lead (II) Perchlorate Trihydrate, 95% 13453-62-8
Neodymium Oxide, 99.9% 1313-97-9
Praseodymium Nitrate, Hexahydrate 7697-37-2
Praseodymium(III)-Nitrate Pentahydrate 14483-17-1
Praseodymium Oxide, 99.9% 12037-29-5
Cerium (III) Acetate, Hydrate 17829-82-2
Cerium III Nitrate Hexahydrate 10108-73-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net