**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-73-6 |2-(Ethylamino)ethanol | >99.0 | 203-797-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 22 24 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. Toxic in contact with skin. Causes
burns.Corrosive.Toxic.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Harmful if absorbed through the skin. Causes skin burns. Substance
is readily absorbed through the skin. May cause cyanosis of the
extremities. May cause skin rash (in milder cases), and cold and
clammy skin with cyanosis or pale color.
Ingestion:
Causes gastrointestinal tract burns. May cause perforation of the
digestive tract. May be harmful if swallowed. May cause systemic
effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Remove all sources of ignition. Use
a spark-proof tool. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Do not get in eyes, on skin, or on clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
away from heat, sparks and flame. Do not ingest or inhale. Discard
contaminated shoes. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 110-73-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 167 deg C @ 760.00mm Hg
Freezing/Melting Point: -6 deg C
Autoignition Temperature: 330 deg C ( 626.00 deg F)
Flash Point: 78 deg C ( 172.40 deg F)
Explosion Limits, lower: 1.10 vol %
Explosion Limits, upper: 11.70 vol %
Decomposition Temperature: Not available.
Solubility in water: miscible
Specific Gravity/Density: .9140g/cm3
Molecular Formula: C4H11NO
Molecular Weight: 89.14
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 110-73-6: KK9100000
LD50/LC50:
CAS# 110-73-6: Oral, rat: LD50 = 1 gm/kg; Skin, rabbit: LD50 = 360
uL/kg.
Carcinogenicity:
2-(Ethylamino)ethanol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CAUSTIC ALKALI LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1719
Packing Group: III
IMO
Shipping Name: CAUSTIC ALKALI LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1719
Packing Group: III
RID/ADR
Shipping Name: CAUSTIC ALKALI LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1719
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 22 Harmful if swallowed.
R 24 Toxic in contact with skin.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 110-73-6: 1
Canada
CAS# 110-73-6 is listed on Canada's DSL List.
CAS# 110-73-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-73-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Chloroethyl Methyl Ether, 98%
| 627-42-9 |
|
1-Ethyl-2-benzimidazolinone, 98%
| 10045-45-1 |
|
6-Bromohexanoic Acid, 98%
| 4224-70-8 |
|
(S)-(+)-1-Phenyl-1,2-Ethanediol, 99+%
| 25779-13-9 |
|
Platinum on sulfide carbon,5% pt,contains ca.50% moisture
| 7440-06-4 |
|
Zinc selenide, 99.99%
| 1315-09-9 |
|
2-(2-Methoxyethoxy)-Ethanol 99%
| 111-77-3 |
|
Phenylbutazone, 99+%
| 50-33-9 |
|
4-Amino-2,6-Dihydroxypyrimidine, 98%
| 873-83-6 |
|
Sodium cyanoborohydride, 95+%
| 25895-60-7 |
|
Syringaldazine, 99+%
| 14414-32-5 |
|
1,1,4-Triacetoxy-2,2-dichlorobutane, 98%
| 0-01-1 |
|
l(+)-Gulonic Acid Gamma-Lactone, 97%
| 1128-23-0 |
|
Diethylaminoacetonitrile
| 3010-02-4 |
|
Calcium sulfate dihydrate, p.a.
| 7778-18-9 |
|
Beta-Carotene, 99% (UV-VIS)
| 7235-40-7 |
|
Hoechst 33258, 98%
| 23491-45-4 |
|
4'-Chlorobutyrophenone, 99%
| 4981-63-9 |
|
Brilliant yellow, 98% (uv-vis)
| 3051-11-4 |
|
d-Lysine hydrochloride, 99+%
| 7274-88-6 |
|
Indoxyl Acetate, 97%
| 608-08-2 |
|
Ethyl 3-Phenylglycidate, 98%
| 121-39-1 |
|
Amberlite cg-120 ion-exchange resin
| 37360-75-1 |
|
18-Crown-6, 99%
| 17455-13-9 |
|
1-Chloro-3-phenylpropane, 98+%
| 104-52-9 |
|
L-(+)-Rhamnose Monohydrate, 99%
| 10030-85-0 |
|
5-Chloro-2,3-Dibromo-1-Fluorobenzene, 98%
| 92771-38-5 |
|
1-Methyl-6,7-Dihydroxy-3,4-Dihydroisoquinoline, Monohydrate, 99%
| |
|
Cyclohexyl chloride, 98%
| 542-18-7 |
|
N-Ethyldiethanolamine, 98%
| 139-87-7 |
|
Aluminum Cyclohexanebutyrate
| 38598-34-4 |
|
Benzyltrimethylammonium chloride, 98+%
| 56-93-9 |
|
p-Cresol
| 106-44-5 |
|
1,4-Benzodioxan-6-amine, 99%
| 22013-33-8 |
|
Aza-15-crown-5, 99+%
| 66943-05-3 |
|
Triphenylformazan, 98% (Nitrogen)
| 531-52-2 |
|
p-Dichlorobenzene
| 106-46-7 |
|
2-(Ethylamino)-ethanol, p.a.
| 110-73-6 |
|
Amberlyst ?? A-26 Ion-Exchange Resin
| 39280-09-6 |
|
2,4,4-Trimethyl-1-Pentanol, 98%
| 16325-63-6 |
|
1,4-Dibromo-2,5-Dimethylbenzene, 99%
| 1074-24-4 |
|
p-Dimethylaminobenzaldehyde
| 100-10-7 |
|
3-Methoxyphenol, 97%
| 150-19-6 |
|
2,3-Dichloroaniline, 99%
| 608-27-5 |
|
2,4-Diamino-6-Hydroxypyrimidine, 96%
| 56-06-4 |
|
4-Bromostyrene, 96%, Stab. with ca. 100 ppm 4-Tert.-Butylcatechol
| 2039-82-9 |
|
1-Aminoanthraquinone
| 82-45-1 |
|
Trimethylsilylmethyl Acetate, 99%
| 2917-65-9 |
|
Tetraethyl pyrophosphite, tech., 93%
| 21646-99-1 |
|
4-Phenylpyrocatechol, 98% (Titr.)
| 92-05-7 |
|
|