**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4224-70-8 |6-Bromohexanoic Acid | 98% | 224-176-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Corrosive.
Potential Health Effects
Eye:
Causes eye irritation and burns. May cause lacrimation (tearing),
blurred vision, and photophobia. May cause chemical conjunctivitis
and corneal damage.
Skin:
Causes skin irritation and burns. May cause cyanosis of the
extremities. May cause skin rash (in milder cases), and cold and
clammy skin with cyanosis or pale color.
Ingestion:
May cause perforation of the digestive tract. May cause cardiac
disturbances. May cause central nervous system effects. May cause
systemic effects. Causes severe digestive tract burns.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause cardiac abnormalities. May cause
systemic effects. Olfactory fatigue may occur. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Containers
may explode when heated. Water hydrolyzes material liberating acidic
gas which in contact with metal surfaces can generate flammable
and/or explosive hydrogen gas.
Extinguishing Media:
Do NOT get water inside containers. For large fires, use water
spray, fog or regular foam. Contact professional fire-fighters
immediately. For small fires, use dry chemical, carbon dioxide,
sand, earth, water spray or regular foam. Cool containers with
flooding quantities of water until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Scoop up with a nonsparking tool, then place into
a suitable container for disposal. Avoid generating dusty
conditions. Remove all sources of ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Minimize dust generation and accumulation. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep container tightly closed. Keep away from
heat, sparks and flame. Do not ingest or inhale. Discard
contaminated shoes. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4224-70-8:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: slightly beige
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 165 - 170 deg C @ 20.00mmHg
Freezing/Melting Point: 33.00 - 35.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 67 deg C ( 152.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H11BrO2
Molecular Weight: 195.06
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 4224-70-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
6-Bromohexanoic Acid -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 4224-70-8: No information available.
Canada
CAS# 4224-70-8 is listed on Canada's NDSL List.
CAS# 4224-70-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4224-70-8 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Chloroethyl Methyl Ether, 98%
| 627-42-9 |
|
1-Ethyl-2-benzimidazolinone, 98%
| 10045-45-1 |
|
6-Bromohexanoic Acid, 98%
| 4224-70-8 |
|
(S)-(+)-1-Phenyl-1,2-Ethanediol, 99+%
| 25779-13-9 |
|
Platinum on sulfide carbon,5% pt,contains ca.50% moisture
| 7440-06-4 |
|
Zinc selenide, 99.99%
| 1315-09-9 |
|
2-(2-Methoxyethoxy)-Ethanol 99%
| 111-77-3 |
|
Phenylbutazone, 99+%
| 50-33-9 |
|
4-Amino-2,6-Dihydroxypyrimidine, 98%
| 873-83-6 |
|
Sodium cyanoborohydride, 95+%
| 25895-60-7 |
|
Syringaldazine, 99+%
| 14414-32-5 |
|
1,1,4-Triacetoxy-2,2-dichlorobutane, 98%
| 0-01-1 |
|
l(+)-Gulonic Acid Gamma-Lactone, 97%
| 1128-23-0 |
|
Diethylaminoacetonitrile
| 3010-02-4 |
|
Calcium sulfate dihydrate, p.a.
| 7778-18-9 |
|
Beta-Carotene, 99% (UV-VIS)
| 7235-40-7 |
|
Hoechst 33258, 98%
| 23491-45-4 |
|
4'-Chlorobutyrophenone, 99%
| 4981-63-9 |
|
Brilliant yellow, 98% (uv-vis)
| 3051-11-4 |
|
d-Lysine hydrochloride, 99+%
| 7274-88-6 |
|
Indoxyl Acetate, 97%
| 608-08-2 |
|
Ethyl 3-Phenylglycidate, 98%
| 121-39-1 |
|
Amberlite cg-120 ion-exchange resin
| 37360-75-1 |
|
18-Crown-6, 99%
| 17455-13-9 |
|
1-Chloro-3-phenylpropane, 98+%
| 104-52-9 |
|
L-(+)-Rhamnose Monohydrate, 99%
| 10030-85-0 |
|
5-Chloro-2,3-Dibromo-1-Fluorobenzene, 98%
| 92771-38-5 |
|
1-Methyl-6,7-Dihydroxy-3,4-Dihydroisoquinoline, Monohydrate, 99%
| |
|
Cyclohexyl chloride, 98%
| 542-18-7 |
|
N-Ethyldiethanolamine, 98%
| 139-87-7 |
|
Aluminum Cyclohexanebutyrate
| 38598-34-4 |
|
Benzyltrimethylammonium chloride, 98+%
| 56-93-9 |
|
p-Cresol
| 106-44-5 |
|
1,4-Benzodioxan-6-amine, 99%
| 22013-33-8 |
|
Aza-15-crown-5, 99+%
| 66943-05-3 |
|
Triphenylformazan, 98% (Nitrogen)
| 531-52-2 |
|
p-Dichlorobenzene
| 106-46-7 |
|
2-(Ethylamino)-ethanol, p.a.
| 110-73-6 |
|
Amberlyst ?? A-26 Ion-Exchange Resin
| 39280-09-6 |
|
2,4,4-Trimethyl-1-Pentanol, 98%
| 16325-63-6 |
|
1,4-Dibromo-2,5-Dimethylbenzene, 99%
| 1074-24-4 |
|
p-Dimethylaminobenzaldehyde
| 100-10-7 |
|
3-Methoxyphenol, 97%
| 150-19-6 |
|
2,3-Dichloroaniline, 99%
| 608-27-5 |
|
2,4-Diamino-6-Hydroxypyrimidine, 96%
| 56-06-4 |
|
4-Bromostyrene, 96%, Stab. with ca. 100 ppm 4-Tert.-Butylcatechol
| 2039-82-9 |
|
1-Aminoanthraquinone
| 82-45-1 |
|
Trimethylsilylmethyl Acetate, 99%
| 2917-65-9 |
|
Tetraethyl pyrophosphite, tech., 93%
| 21646-99-1 |
|
4-Phenylpyrocatechol, 98% (Titr.)
| 92-05-7 |
|
|