Search   
MSDS 
:
 Brilliant yellow, 98% (uv-vis)
CAS 
:
 3051-11-4
SYNONYMS 
:
 CI 24890
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3051-11-4 |Brilliant yellow | 98.0 | 221-267-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Prolonged and/or repeated contact may
cause irritation and/or dermatitis.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Get medical
aid if irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Reduce airborne dust and prevent scattering by moistening
with water. Clean up spills immediately, observing precautions in
the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use with adequate
ventilation. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid contact with skin and
eyes. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3051-11-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: red-orange
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: Not applicable.
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizers.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3051-11-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Brilliant yellow -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 3051-11-4: No information available.
Canada
CAS# 3051-11-4 is listed on Canada's DSL List.
CAS# 3051-11-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3051-11-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/16/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Chloroethyl Methyl Ether, 98% 627-42-9
1-Ethyl-2-benzimidazolinone, 98% 10045-45-1
6-Bromohexanoic Acid, 98% 4224-70-8
(S)-(+)-1-Phenyl-1,2-Ethanediol, 99+% 25779-13-9
Platinum on sulfide carbon,5% pt,contains ca.50% moisture 7440-06-4
Zinc selenide, 99.99% 1315-09-9
2-(2-Methoxyethoxy)-Ethanol 99% 111-77-3
Phenylbutazone, 99+% 50-33-9
4-Amino-2,6-Dihydroxypyrimidine, 98% 873-83-6
Sodium cyanoborohydride, 95+% 25895-60-7
Syringaldazine, 99+% 14414-32-5
1,1,4-Triacetoxy-2,2-dichlorobutane, 98% 0-01-1
l(+)-Gulonic Acid Gamma-Lactone, 97% 1128-23-0
Diethylaminoacetonitrile 3010-02-4
Calcium sulfate dihydrate, p.a. 7778-18-9
Beta-Carotene, 99% (UV-VIS) 7235-40-7
Hoechst 33258, 98% 23491-45-4
4'-Chlorobutyrophenone, 99% 4981-63-9
Brilliant yellow, 98% (uv-vis) 3051-11-4
d-Lysine hydrochloride, 99+% 7274-88-6
Indoxyl Acetate, 97% 608-08-2
Ethyl 3-Phenylglycidate, 98% 121-39-1
Amberlite cg-120 ion-exchange resin 37360-75-1
18-Crown-6, 99% 17455-13-9
1-Chloro-3-phenylpropane, 98+% 104-52-9
L-(+)-Rhamnose Monohydrate, 99% 10030-85-0
5-Chloro-2,3-Dibromo-1-Fluorobenzene, 98% 92771-38-5
1-Methyl-6,7-Dihydroxy-3,4-Dihydroisoquinoline, Monohydrate, 99%
Cyclohexyl chloride, 98% 542-18-7
N-Ethyldiethanolamine, 98% 139-87-7
Aluminum Cyclohexanebutyrate 38598-34-4
Benzyltrimethylammonium chloride, 98+% 56-93-9
p-Cresol 106-44-5
1,4-Benzodioxan-6-amine, 99% 22013-33-8
Aza-15-crown-5, 99+% 66943-05-3
Triphenylformazan, 98% (Nitrogen) 531-52-2
p-Dichlorobenzene 106-46-7
2-(Ethylamino)-ethanol, p.a. 110-73-6
Amberlyst ?? A-26 Ion-Exchange Resin 39280-09-6
2,4,4-Trimethyl-1-Pentanol, 98% 16325-63-6
1,4-Dibromo-2,5-Dimethylbenzene, 99% 1074-24-4
p-Dimethylaminobenzaldehyde 100-10-7
3-Methoxyphenol, 97% 150-19-6
2,3-Dichloroaniline, 99% 608-27-5
2,4-Diamino-6-Hydroxypyrimidine, 96% 56-06-4
4-Bromostyrene, 96%, Stab. with ca. 100 ppm 4-Tert.-Butylcatechol 2039-82-9
1-Aminoanthraquinone 82-45-1
Trimethylsilylmethyl Acetate, 99% 2917-65-9
Tetraethyl pyrophosphite, tech., 93% 21646-99-1
4-Phenylpyrocatechol, 98% (Titr.) 92-05-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net