Search   
MSDS 
:
 3-Methoxyphenol, 97%
CAS 
:
 150-19-6
SYNONYMS 
:
 m-Hydroxyanisole
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 150-19-6 |3-METHOXYPHENOL | 97% | 205-754-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22 36

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Irritating to eyes.

Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
May cause skin irritation. Harmful if absorbed through the skin. May
cause skin discoloration.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Chronic exposure may cause visual disturbances.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Water or foam may cause frothing. Use water spray, dry chemical,
carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Do not get in eyes, on skin, or on clothing. Keep container tightly
closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 150-19-6:

Russia: 0.5 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear pink red
Odor: Odor of caramel and phenol
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 243 - 246 deg C @ 760.00mm Hg
Freezing/Melting Point: -17 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density: 1.1310g/cm3
Molecular Formula: C7H8O2
Molecular Weight: 124.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Bases - acid chlorides - acid anhydrides - oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 150-19-6: SL7524000
LD50/LC50:
CAS# 150-19-6: Draize test, rabbit, eye: 5% Severe; Draize test,
rabbit, eye: 100%; Draize test, rabbit, skin: 100%; Inhalation,
mouse: LC50 = 11500 mg/m3/4H; Inhalation, rat: LC50 = 11500 mg/m3/4H;
Oral, mouse: LD50 = 312 mg/kg; Oral, mouse: LD50 = 312 mg/kg; Oral,
rat: LD50 = 597 mg/kg; Oral, rat: LD50 = 597 mg/kg; Skin, rat: LD50 =
682 mg/kg.
Carcinogenicity:
3-METHOXYPHENOL -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36 Irritating to eyes.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 150-19-6: No information available.
Canada
CAS# 150-19-6 is listed on Canada's NDSL List.
CAS# 150-19-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 150-19-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Chloroethyl Methyl Ether, 98% 627-42-9
1-Ethyl-2-benzimidazolinone, 98% 10045-45-1
6-Bromohexanoic Acid, 98% 4224-70-8
(S)-(+)-1-Phenyl-1,2-Ethanediol, 99+% 25779-13-9
Platinum on sulfide carbon,5% pt,contains ca.50% moisture 7440-06-4
Zinc selenide, 99.99% 1315-09-9
2-(2-Methoxyethoxy)-Ethanol 99% 111-77-3
Phenylbutazone, 99+% 50-33-9
4-Amino-2,6-Dihydroxypyrimidine, 98% 873-83-6
Sodium cyanoborohydride, 95+% 25895-60-7
Syringaldazine, 99+% 14414-32-5
1,1,4-Triacetoxy-2,2-dichlorobutane, 98% 0-01-1
l(+)-Gulonic Acid Gamma-Lactone, 97% 1128-23-0
Diethylaminoacetonitrile 3010-02-4
Calcium sulfate dihydrate, p.a. 7778-18-9
Beta-Carotene, 99% (UV-VIS) 7235-40-7
Hoechst 33258, 98% 23491-45-4
4'-Chlorobutyrophenone, 99% 4981-63-9
Brilliant yellow, 98% (uv-vis) 3051-11-4
d-Lysine hydrochloride, 99+% 7274-88-6
Indoxyl Acetate, 97% 608-08-2
Ethyl 3-Phenylglycidate, 98% 121-39-1
Amberlite cg-120 ion-exchange resin 37360-75-1
18-Crown-6, 99% 17455-13-9
1-Chloro-3-phenylpropane, 98+% 104-52-9
L-(+)-Rhamnose Monohydrate, 99% 10030-85-0
5-Chloro-2,3-Dibromo-1-Fluorobenzene, 98% 92771-38-5
1-Methyl-6,7-Dihydroxy-3,4-Dihydroisoquinoline, Monohydrate, 99%
Cyclohexyl chloride, 98% 542-18-7
N-Ethyldiethanolamine, 98% 139-87-7
Aluminum Cyclohexanebutyrate 38598-34-4
Benzyltrimethylammonium chloride, 98+% 56-93-9
p-Cresol 106-44-5
1,4-Benzodioxan-6-amine, 99% 22013-33-8
Aza-15-crown-5, 99+% 66943-05-3
Triphenylformazan, 98% (Nitrogen) 531-52-2
p-Dichlorobenzene 106-46-7
2-(Ethylamino)-ethanol, p.a. 110-73-6
Amberlyst ?? A-26 Ion-Exchange Resin 39280-09-6
2,4,4-Trimethyl-1-Pentanol, 98% 16325-63-6
1,4-Dibromo-2,5-Dimethylbenzene, 99% 1074-24-4
p-Dimethylaminobenzaldehyde 100-10-7
3-Methoxyphenol, 97% 150-19-6
2,3-Dichloroaniline, 99% 608-27-5
2,4-Diamino-6-Hydroxypyrimidine, 96% 56-06-4
4-Bromostyrene, 96%, Stab. with ca. 100 ppm 4-Tert.-Butylcatechol 2039-82-9
1-Aminoanthraquinone 82-45-1
Trimethylsilylmethyl Acetate, 99% 2917-65-9
Tetraethyl pyrophosphite, tech., 93% 21646-99-1
4-Phenylpyrocatechol, 98% (Titr.) 92-05-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net