Search   
MSDS 
:
 Eicosane, 99%
CAS 
:
 112-95-8
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 112-95-8 |Eicosane | 99% | 204-018-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up,
then place into a suitable container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 112-95-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 220 deg C @ 30.00mmHg
Freezing/Melting Point: 36.00 - 38.00 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density:
Molecular Formula: C20H42
Molecular Weight: 282.54

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 112-95-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Eicosane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 112-95-8: No information available.
Canada
CAS# 112-95-8 is listed on Canada's DSL List.
CAS# 112-95-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 112-95-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/10/1998 Revision #4 Date: 2/14/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ytterbium, 99,9%, -12 mm 7440-64-4
5-Chloro-1-indanone, 98% 42348-86-7
2-Methyl-1-butanethiol, 95% 1878-18-8
2-Methyl-3-Nitrobenzyl Chloride 60468-54-4
3-Methoxypropylamine, 99+% 5332-73-0
Eicosane, 99% 112-95-8
3-Benzylpyridine, 97% 620-95-1
Chloro-(chloromethyl)-dimethylsilane, 98% 1719-57-9
Rhodium on 1/8-inch alumina pellets ( 0.5% rh)
3-Methyl-1-hexene, 99% 3404-61-3
4-Fluorobenzimidazole-2-carboxylic acid 83431-74-7
(S)-(-)-5-(Hydroxymethyl)-2(5H)-furanone, 99% (99% e.e.) 78508-96-0
2-Acetylthiophene, 98%, Balance Mainly 3-Acetylthiophene 88-15-3
Phenylphosphinic acid sodium salt (50% aqueous solution), 46% (titr.) 4297-95-4
m-(Hydrazinosulfonyl)benzoic acid, 99% 7385-52-6
2-Hydroxyquinoline, 99% (UV-VIS) 59-31-4
Acrylamido Glycolic Acid, Anhydrous, 98% 6737-24-2
Naphthalene-d8, 98+ atom % D 1146-65-2
N-Ethyl-m-toluidine, 99+% 102-27-2
Thiazole, 99% 288-47-1
Ferrozine Iron Reagent, Monohydrate, 95+% (UV-Vis) 69898-45-9
1-(4-Methoxyphenyl)-2-methylpiperazine 35947-12-7
7-(2-Chloroethyl)-Theophylline, 97% 5878-61-5
Ammonium Hexabromoplatinate(IV), 99.99% 17363-02-9
2,3-Dibromopropanol, 96% 96-13-9
4-(Methylamino)butyric acid hydrochloride, 99% 6976-17-6
1,3-Propanediol, 98% 504-63-2
2-Fluorobenzylamine, 96% 89-99-6
L-Arabinose 5328-37-0
4-N,N-Dimethylaminoazobenzene-4'-isothiocyanate 7612-98-8
DL-aspartic acid magnesium salt tetrahydrate, 98% 215528-79-3
2-(Diisopropylamino)ethyl Chloride Hydro-Chloride, 97% 4261-68-1
5-Methoxysalicylic Acid, 98% 2612-02-4
1,2-Benzisoxazole, 95% 271-95-4
2,2'-(1,2-Ethenediyldi-4,1-Phenylene)- Bisbenzoxazole 1533-45-5
6,7-Dimethoxy-1,2,3,4-Tetrahydroisoquinoline-1-Thione, 99% 24456-59-5
3,3'-Dichloropivalic Acid, 99% 67329-11-7
3-Indoleacrylic acid, 99% 1204-06-4
1,2,3,6,7,8-Hexahydropyrene,98% 1732-13-4
9H-fluorene-4-carboxylic acid, 96% 6954-55-8
Methylamine Hydrochloride, P.A. 593-51-1
Potassium superoxide (chunks) 12030-88-5
N-Methyl-N-(trimethylsilyl)acetamide, 99% 7449-74-3
1-[4,4-Bis(4-fluorophenyl)butyl]piperazine 5631-35-6
2-(2-Hydroxyethyl)Pyridine, 99% 103-74-2
Scandium(iii)nitrate hydrate, 99.9%
9,10-Diphenylanthracene, 99% 1499-10-1
Nocodazole 99+% 31430-18-9
1-Octanesulfonic Acid Sodium Salt, 99+%, HPLC Grade anhydrous 5324-84-5
Barium perchlorate, anhydrous, 99% 13465-95-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net