**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 504-63-2 |1,3-Propanediol | 98 | 207-997-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause central
nervous system depression.
Inhalation:
May cause respiratory tract irritation. May cause effects similar to
those described for ingestion.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Containers may explode in the heat of a fire. Combustible
liquid.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Cool containers with flooding quantities of water until well after
fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with skin and eyes. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels.
Exposure Limits
CAS# 504-63-2:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron. Wear appropriate protective
clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: odorless
pH: Not available.
Vapor Pressure: 0.1 mbar @ 20C
Viscosity: 39.2mPas @ 20C
Boiling Point: 210 deg C
Freezing/Melting Point: -27 deg C
Autoignition Temperature: 400 deg C ( 752.00 deg F)
Flash Point: 79 deg C ( 174.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: 1.05
Molecular Formula: CH2(CH2OH)2
Molecular Weight: 76.0548
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, strong oxidants, oxidizers.
Incompatibilities with Other Materials:
Strong oxidizing agents, acid chlorides, acid anhydrides,
chloroformates, reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 504-63-2: TY2010000
LD50/LC50:
CAS# 504-63-2: Oral, mouse: LD50 = 4500 mg/kg.
Carcinogenicity:
1,3-Propanediol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 504-63-2: 0
Canada
CAS# 504-63-2 is listed on Canada's DSL List.
CAS# 504-63-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 504-63-2 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/25/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Ytterbium, 99,9%, -12 mm
| 7440-64-4 |
|
5-Chloro-1-indanone, 98%
| 42348-86-7 |
|
2-Methyl-1-butanethiol, 95%
| 1878-18-8 |
|
2-Methyl-3-Nitrobenzyl Chloride
| 60468-54-4 |
|
3-Methoxypropylamine, 99+%
| 5332-73-0 |
|
Eicosane, 99%
| 112-95-8 |
|
3-Benzylpyridine, 97%
| 620-95-1 |
|
Chloro-(chloromethyl)-dimethylsilane, 98%
| 1719-57-9 |
|
Rhodium on 1/8-inch alumina pellets ( 0.5% rh)
| |
|
3-Methyl-1-hexene, 99%
| 3404-61-3 |
|
4-Fluorobenzimidazole-2-carboxylic acid
| 83431-74-7 |
|
(S)-(-)-5-(Hydroxymethyl)-2(5H)-furanone, 99% (99% e.e.)
| 78508-96-0 |
|
2-Acetylthiophene, 98%, Balance Mainly 3-Acetylthiophene
| 88-15-3 |
|
Phenylphosphinic acid sodium salt (50% aqueous solution), 46% (titr.)
| 4297-95-4 |
|
m-(Hydrazinosulfonyl)benzoic acid, 99%
| 7385-52-6 |
|
2-Hydroxyquinoline, 99% (UV-VIS)
| 59-31-4 |
|
Acrylamido Glycolic Acid, Anhydrous, 98%
| 6737-24-2 |
|
Naphthalene-d8, 98+ atom % D
| 1146-65-2 |
|
N-Ethyl-m-toluidine, 99+%
| 102-27-2 |
|
Thiazole, 99%
| 288-47-1 |
|
Ferrozine Iron Reagent, Monohydrate, 95+% (UV-Vis)
| 69898-45-9 |
|
1-(4-Methoxyphenyl)-2-methylpiperazine
| 35947-12-7 |
|
7-(2-Chloroethyl)-Theophylline, 97%
| 5878-61-5 |
|
Ammonium Hexabromoplatinate(IV), 99.99%
| 17363-02-9 |
|
2,3-Dibromopropanol, 96%
| 96-13-9 |
|
4-(Methylamino)butyric acid hydrochloride, 99%
| 6976-17-6 |
|
1,3-Propanediol, 98%
| 504-63-2 |
|
2-Fluorobenzylamine, 96%
| 89-99-6 |
|
L-Arabinose
| 5328-37-0 |
|
4-N,N-Dimethylaminoazobenzene-4'-isothiocyanate
| 7612-98-8 |
|
DL-aspartic acid magnesium salt tetrahydrate, 98%
| 215528-79-3 |
|
2-(Diisopropylamino)ethyl Chloride Hydro-Chloride, 97%
| 4261-68-1 |
|
5-Methoxysalicylic Acid, 98%
| 2612-02-4 |
|
1,2-Benzisoxazole, 95%
| 271-95-4 |
|
2,2'-(1,2-Ethenediyldi-4,1-Phenylene)- Bisbenzoxazole
| 1533-45-5 |
|
6,7-Dimethoxy-1,2,3,4-Tetrahydroisoquinoline-1-Thione, 99%
| 24456-59-5 |
|
3,3'-Dichloropivalic Acid, 99%
| 67329-11-7 |
|
3-Indoleacrylic acid, 99%
| 1204-06-4 |
|
1,2,3,6,7,8-Hexahydropyrene,98%
| 1732-13-4 |
|
9H-fluorene-4-carboxylic acid, 96%
| 6954-55-8 |
|
Methylamine Hydrochloride, P.A.
| 593-51-1 |
|
Potassium superoxide (chunks)
| 12030-88-5 |
|
N-Methyl-N-(trimethylsilyl)acetamide, 99%
| 7449-74-3 |
|
1-[4,4-Bis(4-fluorophenyl)butyl]piperazine
| 5631-35-6 |
|
2-(2-Hydroxyethyl)Pyridine, 99%
| 103-74-2 |
|
Scandium(iii)nitrate hydrate, 99.9%
| |
|
9,10-Diphenylanthracene, 99%
| 1499-10-1 |
|
Nocodazole 99+%
| 31430-18-9 |
|
1-Octanesulfonic Acid Sodium Salt, 99+%, HPLC Grade anhydrous
| 5324-84-5 |
|
Barium perchlorate, anhydrous, 99%
| 13465-95-7 |
|
|