Search   
MSDS 
:
 1,2-Benzisoxazole, 95%
CAS 
:
 271-95-4
SYNONYMS 
:
 Indoxazine; Benzisoazole; Benzisoxazine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 271-95-4 |1,2-benzisoxazole | 95.0 | 205-983-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Light sensitive.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Inhalation at high concentrations may cause
CNS depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire. Use water
spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Store protected from light. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Store protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 271-95-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 90.0 - 92.0 deg C @ 15.00mm H
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 86 deg C ( 186.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1740g/cm3
Molecular Formula: C7H5NO
Molecular Weight: 119.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May discolor on
exposure to light.
Conditions to Avoid:
Incompatible materials, light, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 271-95-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,2-benzisoxazole -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 271-95-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 271-95-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 271-95-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ytterbium, 99,9%, -12 mm 7440-64-4
5-Chloro-1-indanone, 98% 42348-86-7
2-Methyl-1-butanethiol, 95% 1878-18-8
2-Methyl-3-Nitrobenzyl Chloride 60468-54-4
3-Methoxypropylamine, 99+% 5332-73-0
Eicosane, 99% 112-95-8
3-Benzylpyridine, 97% 620-95-1
Chloro-(chloromethyl)-dimethylsilane, 98% 1719-57-9
Rhodium on 1/8-inch alumina pellets ( 0.5% rh)
3-Methyl-1-hexene, 99% 3404-61-3
4-Fluorobenzimidazole-2-carboxylic acid 83431-74-7
(S)-(-)-5-(Hydroxymethyl)-2(5H)-furanone, 99% (99% e.e.) 78508-96-0
2-Acetylthiophene, 98%, Balance Mainly 3-Acetylthiophene 88-15-3
Phenylphosphinic acid sodium salt (50% aqueous solution), 46% (titr.) 4297-95-4
m-(Hydrazinosulfonyl)benzoic acid, 99% 7385-52-6
2-Hydroxyquinoline, 99% (UV-VIS) 59-31-4
Acrylamido Glycolic Acid, Anhydrous, 98% 6737-24-2
Naphthalene-d8, 98+ atom % D 1146-65-2
N-Ethyl-m-toluidine, 99+% 102-27-2
Thiazole, 99% 288-47-1
Ferrozine Iron Reagent, Monohydrate, 95+% (UV-Vis) 69898-45-9
1-(4-Methoxyphenyl)-2-methylpiperazine 35947-12-7
7-(2-Chloroethyl)-Theophylline, 97% 5878-61-5
Ammonium Hexabromoplatinate(IV), 99.99% 17363-02-9
2,3-Dibromopropanol, 96% 96-13-9
4-(Methylamino)butyric acid hydrochloride, 99% 6976-17-6
1,3-Propanediol, 98% 504-63-2
2-Fluorobenzylamine, 96% 89-99-6
L-Arabinose 5328-37-0
4-N,N-Dimethylaminoazobenzene-4'-isothiocyanate 7612-98-8
DL-aspartic acid magnesium salt tetrahydrate, 98% 215528-79-3
2-(Diisopropylamino)ethyl Chloride Hydro-Chloride, 97% 4261-68-1
5-Methoxysalicylic Acid, 98% 2612-02-4
1,2-Benzisoxazole, 95% 271-95-4
2,2'-(1,2-Ethenediyldi-4,1-Phenylene)- Bisbenzoxazole 1533-45-5
6,7-Dimethoxy-1,2,3,4-Tetrahydroisoquinoline-1-Thione, 99% 24456-59-5
3,3'-Dichloropivalic Acid, 99% 67329-11-7
3-Indoleacrylic acid, 99% 1204-06-4
1,2,3,6,7,8-Hexahydropyrene,98% 1732-13-4
9H-fluorene-4-carboxylic acid, 96% 6954-55-8
Methylamine Hydrochloride, P.A. 593-51-1
Potassium superoxide (chunks) 12030-88-5
N-Methyl-N-(trimethylsilyl)acetamide, 99% 7449-74-3
1-[4,4-Bis(4-fluorophenyl)butyl]piperazine 5631-35-6
2-(2-Hydroxyethyl)Pyridine, 99% 103-74-2
Scandium(iii)nitrate hydrate, 99.9%
9,10-Diphenylanthracene, 99% 1499-10-1
Nocodazole 99+% 31430-18-9
1-Octanesulfonic Acid Sodium Salt, 99+%, HPLC Grade anhydrous 5324-84-5
Barium perchlorate, anhydrous, 99% 13465-95-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net