Search   
MSDS 
:
 Thiazole, 99%
CAS 
:
 288-47-1
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 288-47-1 |Thiazole | 99 | 206-021-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.The toxicological properties of this material have not
been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Vapors may cause
dizziness or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Use agent most appropriate to
extinguish fire. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 288-47-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 117.0 - 118.0 deg C @ 760.00m
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 22 deg C ( 71.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble
Specific Gravity/Density: 1.2000g/cm3
Molecular Formula: C3H3NS
Molecular Weight: 85.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, electrical
sparks, exposure to flame.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, acid chlorides, acid anhydrides.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 288-47-1: XJ1290000
LD50/LC50:
CAS# 288-47-1: Oral, mouse: LD50 = 983 mg/kg.
Carcinogenicity:
Thiazole -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 288-47-1: No information available.
Canada
CAS# 288-47-1 is listed on Canada's DSL List.
CAS# 288-47-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 288-47-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/29/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ytterbium, 99,9%, -12 mm 7440-64-4
5-Chloro-1-indanone, 98% 42348-86-7
2-Methyl-1-butanethiol, 95% 1878-18-8
2-Methyl-3-Nitrobenzyl Chloride 60468-54-4
3-Methoxypropylamine, 99+% 5332-73-0
Eicosane, 99% 112-95-8
3-Benzylpyridine, 97% 620-95-1
Chloro-(chloromethyl)-dimethylsilane, 98% 1719-57-9
Rhodium on 1/8-inch alumina pellets ( 0.5% rh)
3-Methyl-1-hexene, 99% 3404-61-3
4-Fluorobenzimidazole-2-carboxylic acid 83431-74-7
(S)-(-)-5-(Hydroxymethyl)-2(5H)-furanone, 99% (99% e.e.) 78508-96-0
2-Acetylthiophene, 98%, Balance Mainly 3-Acetylthiophene 88-15-3
Phenylphosphinic acid sodium salt (50% aqueous solution), 46% (titr.) 4297-95-4
m-(Hydrazinosulfonyl)benzoic acid, 99% 7385-52-6
2-Hydroxyquinoline, 99% (UV-VIS) 59-31-4
Acrylamido Glycolic Acid, Anhydrous, 98% 6737-24-2
Naphthalene-d8, 98+ atom % D 1146-65-2
N-Ethyl-m-toluidine, 99+% 102-27-2
Thiazole, 99% 288-47-1
Ferrozine Iron Reagent, Monohydrate, 95+% (UV-Vis) 69898-45-9
1-(4-Methoxyphenyl)-2-methylpiperazine 35947-12-7
7-(2-Chloroethyl)-Theophylline, 97% 5878-61-5
Ammonium Hexabromoplatinate(IV), 99.99% 17363-02-9
2,3-Dibromopropanol, 96% 96-13-9
4-(Methylamino)butyric acid hydrochloride, 99% 6976-17-6
1,3-Propanediol, 98% 504-63-2
2-Fluorobenzylamine, 96% 89-99-6
L-Arabinose 5328-37-0
4-N,N-Dimethylaminoazobenzene-4'-isothiocyanate 7612-98-8
DL-aspartic acid magnesium salt tetrahydrate, 98% 215528-79-3
2-(Diisopropylamino)ethyl Chloride Hydro-Chloride, 97% 4261-68-1
5-Methoxysalicylic Acid, 98% 2612-02-4
1,2-Benzisoxazole, 95% 271-95-4
2,2'-(1,2-Ethenediyldi-4,1-Phenylene)- Bisbenzoxazole 1533-45-5
6,7-Dimethoxy-1,2,3,4-Tetrahydroisoquinoline-1-Thione, 99% 24456-59-5
3,3'-Dichloropivalic Acid, 99% 67329-11-7
3-Indoleacrylic acid, 99% 1204-06-4
1,2,3,6,7,8-Hexahydropyrene,98% 1732-13-4
9H-fluorene-4-carboxylic acid, 96% 6954-55-8
Methylamine Hydrochloride, P.A. 593-51-1
Potassium superoxide (chunks) 12030-88-5
N-Methyl-N-(trimethylsilyl)acetamide, 99% 7449-74-3
1-[4,4-Bis(4-fluorophenyl)butyl]piperazine 5631-35-6
2-(2-Hydroxyethyl)Pyridine, 99% 103-74-2
Scandium(iii)nitrate hydrate, 99.9%
9,10-Diphenylanthracene, 99% 1499-10-1
Nocodazole 99+% 31430-18-9
1-Octanesulfonic Acid Sodium Salt, 99+%, HPLC Grade anhydrous 5324-84-5
Barium perchlorate, anhydrous, 99% 13465-95-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net