**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 115-84-4 |2-Butyl-2-Ethyl-1,3-Propanediol | 97 | 204-111-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 115-84-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystals
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 178 deg C @ 50.00mmHg
Freezing/Melting Point: 41.00 - 44.00 deg C
Autoignition Temperature: Not available.
Flash Point: 137 deg C ( 278.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 0.8% (20 c)
Specific Gravity/Density:
Molecular Formula: C9H20O2
Molecular Weight: 160.26
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 115-84-4: TY3605000
LD50/LC50:
CAS# 115-84-4: Oral, rat: LD50 = 5040 mg/kg; Skin, rabbit: LD50 =
3810 mg/kg.
Carcinogenicity:
2-Butyl-2-Ethyl-1,3-Propanediol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 115-84-4: No information available.
Canada
CAS# 115-84-4 is listed on Canada's DSL List.
CAS# 115-84-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 115-84-4 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 6/01/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Ligroine (O3386)
| 110-54-3 |
|
Saturated Phenol, pH 6.6/7.9
| 77-86-1 |
|
Saturated Phenol, pH 4.3/4.5
| 108-95-2 |
|
Phenol/Chloroform/Isoamyl Alcohol, pH 4.3
| 67-66-3 |
|
Phenol/Chloroform/Isoamyl Alcohol (pH5.2)
| 67-66-3 |
|
Tris 1 Molar Buffer
| 77-86-1 |
|
Tris 2 Molar Buffer
| 77-86-1 |
|
4-Chloro-alpha-methylstyrene, 96% (GC)
| 1712-70-5 |
|
1,9-Diphenyl-1,3,6,8-nonatetraen-5-one, 98% (uv-vis)
| 622-21-9 |
|
4-Methoxystilbene, 98+%
| 1142-15-0 |
|
Phenoxy resin, average m.w. 85000
| 26402-79-9 |
|
2,3,5-Trimethylanisole, 99%
| 20469-61-8 |
|
4-Methoxybenzylamine, 98%
| 2393-23-9 |
|
4-Nitrophenyl phosphate tris buffer salt, 98% (titr.)
| 52435-04-8 |
|
Picrotoxin, 99%
| 124-87-8 |
|
4-Nitrocatechol, 97%
| 3316-09-4 |
|
Dipentylphthalate, 99%
| 131-18-0 |
|
Ammonium hexachlororuthenate(iv), 99%
| 18746-63-9 |
|
2-Hydroxy-5-Methoxybenzaldehyde, 98%
| 672-13-9 |
|
N-(2-acetamidophenethyl)-1-hydroxy-2-naphthamide
| 5254-41-1 |
|
Anthrone, reagent acs
| 90-44-8 |
|
(-)-cis-Myrtanylamine, 98%
| 38235-68-6 |
|
Tetrakis-(Triphenylphosphine)-Palladium(0), 99%
| 14221-01-3 |
|
N-Phenyl-p-phenylenediamine, 98%
| 101-54-2 |
|
2-Chlorophenothiazine, 97% Contains 3% Mineral Oil
| 92-39-7 |
|
n-Glycyl-l-tyrosine, hydrate, 97%
| 658-79-7 |
|
3,5-Dimethoxybenzoic Acid, 99%
| 1132-21-4 |
|
3-Chlorobenzotrifluoride, 98%
| 98-15-7 |
|
2-Bromo-4'-Phenylacetophenone, Tech.
| 135-73-9 |
|
4-tert-Butyltoluene
| 98-51-1 |
|
2,6-Diformyl-4-Methylphenol, 99%
| 7310-95-4 |
|
3-Acetoxy-2(1h)-pyridone
| 61296-14-8 |
|
N-Formylpiperidine, 99%
| 2591-86-8 |
|
1-Phenyl-1-cyclohexene, 97%
| 771-98-2 |
|
Glycine anhydride, 98%
| 106-57-0 |
|
4-Piperazinoacetophenone, 94%
| 51639-48-6 |
|
Purine, 99%
| 120-73-0 |
|
2,3-Naphthalenedicarboxylic Acid, 95%
| 2169-87-1 |
|
2-Butyl-2-Ethyl-1,3-Propanediol, 97%
| 115-84-4 |
|
4-(2-Iodoacetamido)-TEMPO, free radical
| 25713-24-0 |
|
4-Heptylbenzoyl Chloride, 99+% (Titr.)
| 50606-96-7 |
|
D-Glucosamine Hydrochloride, 98%
| 66-84-2 |
|
2-Amino-5-chlorobenzoic acid, 98%
| 634-95-7 |
|
Cyclopropyl-4-Methoxydiphenylcarbinol, 95%
| 0-00-1 |
|
6,9-Diamino-2-Ethoxyacridine Lactate, 95% (Titr.)
| 1837-57-6 |
|
2,3,5,6-Tetrabromo-4-Methylphenol, 98%
| 37721-75-8 |
|
3-Methylbenzothiazolium Iodide
| 2786-31-4 |
|
P-Tolunitrile, 98%
| 104-85-8 |
|
Trifluoromethanesulfonic Anhydride, 98%
| 358-23-6 |
|
1-Methyl-2-piperidinemethanol, 97+%
| 20845-34-5 |
|
|