**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 634-95-7 |Urea, n,n-diethyl- | 100.0 | 211-220-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. The toxicological properties of this substance have
not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Wash area with soap and water. Clean up spills
immediately, observing precautions in the Protective Equipment
section. Avoid generating dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits.
Exposure Limits
CAS# 634-95-7:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: yellow-beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: @ 760.00mm Hg
Freezing/Melting Point: 210 - 212 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: H2NC6H3(Cl)CO2H
Molecular Weight: 171.58
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of nitrogen, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 634-95-7: YS9353900
LD50/LC50:
Not available.
Carcinogenicity:
Urea, n,n-diethyl- -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 634-95-7: No information available.
Canada
CAS# 634-95-7 is listed on Canada's NDSL List.
CAS# 634-95-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 634-95-7 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Ligroine (O3386)
| 110-54-3 |
|
Saturated Phenol, pH 6.6/7.9
| 77-86-1 |
|
Saturated Phenol, pH 4.3/4.5
| 108-95-2 |
|
Phenol/Chloroform/Isoamyl Alcohol, pH 4.3
| 67-66-3 |
|
Phenol/Chloroform/Isoamyl Alcohol (pH5.2)
| 67-66-3 |
|
Tris 1 Molar Buffer
| 77-86-1 |
|
Tris 2 Molar Buffer
| 77-86-1 |
|
4-Chloro-alpha-methylstyrene, 96% (GC)
| 1712-70-5 |
|
1,9-Diphenyl-1,3,6,8-nonatetraen-5-one, 98% (uv-vis)
| 622-21-9 |
|
4-Methoxystilbene, 98+%
| 1142-15-0 |
|
Phenoxy resin, average m.w. 85000
| 26402-79-9 |
|
2,3,5-Trimethylanisole, 99%
| 20469-61-8 |
|
4-Methoxybenzylamine, 98%
| 2393-23-9 |
|
4-Nitrophenyl phosphate tris buffer salt, 98% (titr.)
| 52435-04-8 |
|
Picrotoxin, 99%
| 124-87-8 |
|
4-Nitrocatechol, 97%
| 3316-09-4 |
|
Dipentylphthalate, 99%
| 131-18-0 |
|
Ammonium hexachlororuthenate(iv), 99%
| 18746-63-9 |
|
2-Hydroxy-5-Methoxybenzaldehyde, 98%
| 672-13-9 |
|
N-(2-acetamidophenethyl)-1-hydroxy-2-naphthamide
| 5254-41-1 |
|
Anthrone, reagent acs
| 90-44-8 |
|
(-)-cis-Myrtanylamine, 98%
| 38235-68-6 |
|
Tetrakis-(Triphenylphosphine)-Palladium(0), 99%
| 14221-01-3 |
|
N-Phenyl-p-phenylenediamine, 98%
| 101-54-2 |
|
2-Chlorophenothiazine, 97% Contains 3% Mineral Oil
| 92-39-7 |
|
n-Glycyl-l-tyrosine, hydrate, 97%
| 658-79-7 |
|
3,5-Dimethoxybenzoic Acid, 99%
| 1132-21-4 |
|
3-Chlorobenzotrifluoride, 98%
| 98-15-7 |
|
2-Bromo-4'-Phenylacetophenone, Tech.
| 135-73-9 |
|
4-tert-Butyltoluene
| 98-51-1 |
|
2,6-Diformyl-4-Methylphenol, 99%
| 7310-95-4 |
|
3-Acetoxy-2(1h)-pyridone
| 61296-14-8 |
|
N-Formylpiperidine, 99%
| 2591-86-8 |
|
1-Phenyl-1-cyclohexene, 97%
| 771-98-2 |
|
Glycine anhydride, 98%
| 106-57-0 |
|
4-Piperazinoacetophenone, 94%
| 51639-48-6 |
|
Purine, 99%
| 120-73-0 |
|
2,3-Naphthalenedicarboxylic Acid, 95%
| 2169-87-1 |
|
2-Butyl-2-Ethyl-1,3-Propanediol, 97%
| 115-84-4 |
|
4-(2-Iodoacetamido)-TEMPO, free radical
| 25713-24-0 |
|
4-Heptylbenzoyl Chloride, 99+% (Titr.)
| 50606-96-7 |
|
D-Glucosamine Hydrochloride, 98%
| 66-84-2 |
|
2-Amino-5-chlorobenzoic acid, 98%
| 634-95-7 |
|
Cyclopropyl-4-Methoxydiphenylcarbinol, 95%
| 0-00-1 |
|
6,9-Diamino-2-Ethoxyacridine Lactate, 95% (Titr.)
| 1837-57-6 |
|
2,3,5,6-Tetrabromo-4-Methylphenol, 98%
| 37721-75-8 |
|
3-Methylbenzothiazolium Iodide
| 2786-31-4 |
|
P-Tolunitrile, 98%
| 104-85-8 |
|
Trifluoromethanesulfonic Anhydride, 98%
| 358-23-6 |
|
1-Methyl-2-piperidinemethanol, 97+%
| 20845-34-5 |
|
|