Search   
MSDS 
:
 Tetrakis-(Triphenylphosphine)-Palladium(0), 99%
CAS 
:
 14221-01-3
SYNONYMS 
:
 Palladium, tetrakis(triphenylphosphine)-, ( beta-4)-; Palladium,     tetrakis(triphenylphosphine)-, (T-4)-;     Tetra(triphenylphosphine)palladium;     Tetrakis(triphenylphosphine)palladium
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14221-01-3 |Tetrakis (Triphenylphosphine) Palladiu| 99% | 238-086-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Air sensitive.Light sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May cause
irritation of the mucous membranes.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Avoid ingestion and inhalation. Store protected
from light. Store protected from air. Use and store under argon.
Storage:
Keep refrigerated. (Store below 4C/39F.) Keep containers tightly
closed. Store protected from light and air. Store under argon. Store
in a cool, dry area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 14221-01-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >103 deg C
Solubility in water: insoluble
Specific Gravity/Density: Not available.
Molecular Formula: C72H60P4Pd
Molecular Weight: 1155.58

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Air sensitive. Light
sensitive.
Conditions to Avoid:
Incompatible materials, light, exposure to air.
Incompatibilities with Other Materials:
Strong oxidizing agents, direct light, air.
Hazardous Decomposition Products:
Phosphine, carbon monoxide, oxides of phosphorus, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14221-01-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetrakis (Triphenylphosphine) Palladium(0) -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 14221-01-3: 0
Canada
CAS# 14221-01-3 is listed on Canada's NDSL List.
CAS# 14221-01-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14221-01-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ligroine (O3386) 110-54-3
Saturated Phenol, pH 6.6/7.9 77-86-1
Saturated Phenol, pH 4.3/4.5 108-95-2
Phenol/Chloroform/Isoamyl Alcohol, pH 4.3 67-66-3
Phenol/Chloroform/Isoamyl Alcohol (pH5.2) 67-66-3
Tris 1 Molar Buffer 77-86-1
Tris 2 Molar Buffer 77-86-1
4-Chloro-alpha-methylstyrene, 96% (GC) 1712-70-5
1,9-Diphenyl-1,3,6,8-nonatetraen-5-one, 98% (uv-vis) 622-21-9
4-Methoxystilbene, 98+% 1142-15-0
Phenoxy resin, average m.w. 85000 26402-79-9
2,3,5-Trimethylanisole, 99% 20469-61-8
4-Methoxybenzylamine, 98% 2393-23-9
4-Nitrophenyl phosphate tris buffer salt, 98% (titr.) 52435-04-8
Picrotoxin, 99% 124-87-8
4-Nitrocatechol, 97% 3316-09-4
Dipentylphthalate, 99% 131-18-0
Ammonium hexachlororuthenate(iv), 99% 18746-63-9
2-Hydroxy-5-Methoxybenzaldehyde, 98% 672-13-9
N-(2-acetamidophenethyl)-1-hydroxy-2-naphthamide 5254-41-1
Anthrone, reagent acs 90-44-8
(-)-cis-Myrtanylamine, 98% 38235-68-6
Tetrakis-(Triphenylphosphine)-Palladium(0), 99% 14221-01-3
N-Phenyl-p-phenylenediamine, 98% 101-54-2
2-Chlorophenothiazine, 97% Contains 3% Mineral Oil 92-39-7
n-Glycyl-l-tyrosine, hydrate, 97% 658-79-7
3,5-Dimethoxybenzoic Acid, 99% 1132-21-4
3-Chlorobenzotrifluoride, 98% 98-15-7
2-Bromo-4'-Phenylacetophenone, Tech. 135-73-9
4-tert-Butyltoluene 98-51-1
2,6-Diformyl-4-Methylphenol, 99% 7310-95-4
3-Acetoxy-2(1h)-pyridone 61296-14-8
N-Formylpiperidine, 99% 2591-86-8
1-Phenyl-1-cyclohexene, 97% 771-98-2
Glycine anhydride, 98% 106-57-0
4-Piperazinoacetophenone, 94% 51639-48-6
Purine, 99% 120-73-0
2,3-Naphthalenedicarboxylic Acid, 95% 2169-87-1
2-Butyl-2-Ethyl-1,3-Propanediol, 97% 115-84-4
4-(2-Iodoacetamido)-TEMPO, free radical 25713-24-0
4-Heptylbenzoyl Chloride, 99+% (Titr.) 50606-96-7
D-Glucosamine Hydrochloride, 98% 66-84-2
2-Amino-5-chlorobenzoic acid, 98% 634-95-7
Cyclopropyl-4-Methoxydiphenylcarbinol, 95% 0-00-1
6,9-Diamino-2-Ethoxyacridine Lactate, 95% (Titr.) 1837-57-6
2,3,5,6-Tetrabromo-4-Methylphenol, 98% 37721-75-8
3-Methylbenzothiazolium Iodide 2786-31-4
P-Tolunitrile, 98% 104-85-8
Trifluoromethanesulfonic Anhydride, 98% 358-23-6
1-Methyl-2-piperidinemethanol, 97+% 20845-34-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net