**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 118-48-9 |Isatoic Anhydride | 98 | 204-255-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Moisture
sensitive.The toxicological properties of this material have not been
fully investigated.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Do NOT get water
inside containers. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation. Do
not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Do not allow contact with water. Wash clothing
before reuse. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 118-48-9:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: tan
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 233 deg C
Autoignition Temperature: Not available.
Flash Point: 308 deg C ( 586.40 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: >350 deg C
Solubility in water: Miscible.
Specific Gravity/Density:
Molecular Formula: C8H5NO3
Molecular Weight: 163.13
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, moisture, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 118-48-9: DM3100000
LD50/LC50:
Not available.
Carcinogenicity:
Isatoic Anhydride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 118-48-9: 1
Canada
CAS# 118-48-9 is listed on Canada's NDSL List.
CAS# 118-48-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 118-48-9 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 10/23/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Methacrylonitrile, 99% (stabilized with 50 ppm MEHQ)
| 126-98-7 |
|
Boron Trifluoride Dimethanol Complex (50-52 wt% BF3)
| 67-56-1 |
|
Dimethylsulfamoyl Chloride, 99% (GC)
| 13360-57-1 |
|
2,4-Dichloroanisole, 99+%
| 553-82-2 |
|
2-Fluorobenzaldehyde, 97%
| 446-52-6 |
|
Benzoylacetonitrile
| 614-16-4 |
|
3-Fluorobenzonitrile, 98%
| 403-54-3 |
|
3,3,5-Trimethylcyclohexanone, 97%
| 873-94-9 |
|
cis-4-Decenal, 98%
| 21662-09-9 |
|
Cyclohexyl bromide, 99%
| 108-85-0 |
|
Alpha, Alpha, Alpha,4-Tetrafluoro-O-Toluidine, 99%
| 393-39-5 |
|
4-Methoxy-3-Nitrobenzotrifluoride, 99%
| 394-25-2 |
|
Isatoic Anhydride, 98% (Titr.)
| 118-48-9 |
|
2,4'-Difluorobenzophenone, 98%
| 342-25-6 |
|
5-Chloro-2-(Methylamino)benzophenone, 99%
| 1022-13-5 |
|
Hydroquinone sulfonic acid, potassium salt tech.
| 21799-87-1 |
|
L-Leucyl-L-Alanine, Hydrate
| 7298-84-2 |
|
Trifluoroacetaldehyde ethyl hemiacetal, 90%
| 433-27-2 |
|
4-Sulfonic Calix[4]Arene Hydrate, 95%
| 0-01-1 |
|
(n-Propyl)triphenylphosphonium bromide, 99%
| 15912-75-1 |
|
5-Nitro-2-Furaldehyde Diacetate, 98%
| 92-55-7 |
|
3-Nitro-L-Tyrosine, 99%
| 621-44-3 |
|
2-(3-Methoxyphenyl)Cyclohexanone
| 15547-89-4 |
|
2,2'-Dihydroxy-4,4'-dimethoxybenzophenone, 98%
| 131-54-4 |
|
Hippuric Acid, 98%
| 495-69-2 |
|
Dibutyl oxalate, 99%
| 2050-60-4 |
|
N-(2-Hydroxyethyl)Morpholine, 99%
| 622-40-2 |
|
4-Methoxybenzamide (P-Anisamide), 97%
| 3424-93-9 |
|
Manganese(III) acetate dihydrate, 98%
| 993-02-2 |
|
Hexaketocyclohexane octahydrate, 97%
| 527-31-1 |
|
Prussian blue
| 14038-43-8 |
|
(S)-2-Amino-3-Methoxypropanoic Acid Hydrochloride, 98%
| 0-00-1 |
|
trans-1,2-Dichloroethylene, 99.7%, stabilized with 950 ppm BLO and
| 156-60-5 |
|
5-Bromovaleric acid, 97%
| 2067-33-6 |
|
gamma-Decalactone, 97%
| 706-14-9 |
|
Indophenol blue, 99% (uv-vis)
| 132-31-0 |
|
TETRAACETYLETHYLENEDIAMINE, 99.5+%
| 10543-57-4 |
|
Cis-2-Aminocyclohexanol Hydrochloride, 99+%
| 6936-47-6 |
|
5-Chloro-1-phenyl-1h-tetrazole, 97%
| 14210-25-4 |
|
3-Hydroxy-3-methyl-2-butanone, 92%
| 115-22-0 |
|
Precocene I, 99%
| 17598-02-6 |
|
1,3-Dichloroacetone, 99%
| 534-07-6 |
|
2,3-Pyrazinedicarboxamide, 97%
| 6164-78-9 |
|
4-Bromobenzoic Acid 97%
| 586-76-5 |
|
Molecular Sieves, 3A, 4 to 8 Mesh
| 0-00-1 |
|
M-(p-tert-butylphenoxy)benzaldehyde, 99%
| 69770-23-6 |
|
Lysergol
| 602-85-7 |
|
Poly(Vinyl Methyl Ketone) Average M.W. 500.000
| 25038-87-3 |
|
Adenine Sulfate, Dihydrate, 98% (Titr.)
| 321-30-2 |
|
2-(4-Aminophenyl)ethylamine, 95%
| 13472-00-9 |
|
|