Search   
MSDS 
:
 Alpha, Alpha, Alpha,4-Tetrafluoro-O-Toluidine, 99%
CAS 
:
 393-39-5
SYNONYMS 
:
 4-Fluoro-2-(Trifluoromethyl)Aniline.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 393-39-5 |Alpha, Alpha, Alpha, 4-Tetrafluoro-O-T| 99 | 206-886-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis and
corneal damage. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May cause irritation and dermatitis. May
cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Methemoglobinemia is characterized by
dizziness, drowsiness, headache, shortness of breath, cyanosis
(bluish discoloration of skin due to deficient oxygenation of the
blood), rapid heart rate and chocolate-brown colored blood.
Overexposure may cause methemoglobinemia. Ingestion of large amounts
of fluoride may cause salivation, nausea, vomiting, abdominal pain,
fever, labored breathing. Inorganic fluorides can be harmful. Acute
exposure to fluorine compounds can lead to digestive tract burns,
and abdominal pain. Exposure to fluoride compounds can result in
systemic toxic effects on the heart, liver, and kidneys. It may also
deplete calcium levels in the body leading to hypocalcemia and death.
Contains fluoride. Fluoride can reduce calcium levels leading to
fatal hypocalcemia.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Aspiration may lead
to pulmonary edema. Methemoglobinemia is characterized by dizziness,
drowsiness, headache, shortness of breath, cyanosis (bluish
discoloration of skin due to deficient oxygenation of the blood),
rapid heart rate and chocolate-brown blood. Can produce delayed
pulmonary edema. Inhalation of aniline causes anoxia due to the
formation of methemoglobin. Inhalation at high concentrations may
cause CNS depression and asphixiation.
Chronic:
Chronic inhalation and ingestion may cause chronic fluoride
poisoning (fluorosis) characterized by weight loss, weakness,
anemia, brittle bones, and stiff joints. May cause
methemoglobinemia, which is characterized by chocolate-brown colored
blood, headache, weakness, dizziness, breath shortness, cyanosis
(bluish skin due to deficient oxygenation of blood), rapid heart
rate, unconsciousness and possible death. Effects may be delayed.
Chronic exposure to fluoride compounds may cause systemic toxicity.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively. For methemoglobinemia,
administer oxygen alone or with Methylene Blue depending on the
methemoglobin concentration in the blood.
Antidote:
Methylene blue, alone or in combination with oxygen is indicated as
a treatment in nitrite induced methemoglobinemia.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use agent most
appropriate to extinguish fire. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Wash clothing before reuse. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 393-39-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear pale brown
Odor: fish-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 70 - 72 deg C @ 17.50mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 72 deg C ( 161.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.3800g/cm3
Molecular Formula: C7H5F4N
Molecular Weight: 179.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, acids.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 393-39-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Alpha, Alpha, Alpha, 4-Tetrafluoro-O-Toluidine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 393-39-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 393-39-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 393-39-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Methacrylonitrile, 99% (stabilized with 50 ppm MEHQ) 126-98-7
Boron Trifluoride Dimethanol Complex (50-52 wt% BF3) 67-56-1
Dimethylsulfamoyl Chloride, 99% (GC) 13360-57-1
2,4-Dichloroanisole, 99+% 553-82-2
2-Fluorobenzaldehyde, 97% 446-52-6
Benzoylacetonitrile 614-16-4
3-Fluorobenzonitrile, 98% 403-54-3
3,3,5-Trimethylcyclohexanone, 97% 873-94-9
cis-4-Decenal, 98% 21662-09-9
Cyclohexyl bromide, 99% 108-85-0
Alpha, Alpha, Alpha,4-Tetrafluoro-O-Toluidine, 99% 393-39-5
4-Methoxy-3-Nitrobenzotrifluoride, 99% 394-25-2
Isatoic Anhydride, 98% (Titr.) 118-48-9
2,4'-Difluorobenzophenone, 98% 342-25-6
5-Chloro-2-(Methylamino)benzophenone, 99% 1022-13-5
Hydroquinone sulfonic acid, potassium salt tech. 21799-87-1
L-Leucyl-L-Alanine, Hydrate 7298-84-2
Trifluoroacetaldehyde ethyl hemiacetal, 90% 433-27-2
4-Sulfonic Calix[4]Arene Hydrate, 95% 0-01-1
(n-Propyl)triphenylphosphonium bromide, 99% 15912-75-1
5-Nitro-2-Furaldehyde Diacetate, 98% 92-55-7
3-Nitro-L-Tyrosine, 99% 621-44-3
2-(3-Methoxyphenyl)Cyclohexanone 15547-89-4
2,2'-Dihydroxy-4,4'-dimethoxybenzophenone, 98% 131-54-4
Hippuric Acid, 98% 495-69-2
Dibutyl oxalate, 99% 2050-60-4
N-(2-Hydroxyethyl)Morpholine, 99% 622-40-2
4-Methoxybenzamide (P-Anisamide), 97% 3424-93-9
Manganese(III) acetate dihydrate, 98% 993-02-2
Hexaketocyclohexane octahydrate, 97% 527-31-1
Prussian blue 14038-43-8
(S)-2-Amino-3-Methoxypropanoic Acid Hydrochloride, 98% 0-00-1
trans-1,2-Dichloroethylene, 99.7%, stabilized with 950 ppm BLO and 156-60-5
5-Bromovaleric acid, 97% 2067-33-6
gamma-Decalactone, 97% 706-14-9
Indophenol blue, 99% (uv-vis) 132-31-0
TETRAACETYLETHYLENEDIAMINE, 99.5+% 10543-57-4
Cis-2-Aminocyclohexanol Hydrochloride, 99+% 6936-47-6
5-Chloro-1-phenyl-1h-tetrazole, 97% 14210-25-4
3-Hydroxy-3-methyl-2-butanone, 92% 115-22-0
Precocene I, 99% 17598-02-6
1,3-Dichloroacetone, 99% 534-07-6
2,3-Pyrazinedicarboxamide, 97% 6164-78-9
4-Bromobenzoic Acid 97% 586-76-5
Molecular Sieves, 3A, 4 to 8 Mesh 0-00-1
M-(p-tert-butylphenoxy)benzaldehyde, 99% 69770-23-6
Lysergol 602-85-7
Poly(Vinyl Methyl Ketone) Average M.W. 500.000 25038-87-3
Adenine Sulfate, Dihydrate, 98% (Titr.) 321-30-2
2-(4-Aminophenyl)ethylamine, 95% 13472-00-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net