**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2067-33-6 |5-Bromovaleric acid | 97 | 218-185-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause cardiac disturbances.
May cause central nervous system effects.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Containers
may explode when heated. Runoff from fire control or dilution water
may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Use with adequate ventilation. Minimize dust generation and
accumulation. Do not breathe dust, vapor, mist, or gas. Do not get
in eyes, on skin, or on clothing. Keep container tightly closed. Do
not ingest or inhale. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2067-33-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: yellow to light brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 142-145 deg C @ 12.75 mmHg
Freezing/Melting Point: 37-41 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: C5H9BrO2
Molecular Weight: 181.03
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 2067-33-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
5-Bromovaleric acid -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2067-33-6: No information available.
Canada
CAS# 2067-33-6 is listed on Canada's DSL List.
CAS# 2067-33-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2067-33-6 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #6 Date: 4/21/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Methacrylonitrile, 99% (stabilized with 50 ppm MEHQ)
| 126-98-7 |
|
Boron Trifluoride Dimethanol Complex (50-52 wt% BF3)
| 67-56-1 |
|
Dimethylsulfamoyl Chloride, 99% (GC)
| 13360-57-1 |
|
2,4-Dichloroanisole, 99+%
| 553-82-2 |
|
2-Fluorobenzaldehyde, 97%
| 446-52-6 |
|
Benzoylacetonitrile
| 614-16-4 |
|
3-Fluorobenzonitrile, 98%
| 403-54-3 |
|
3,3,5-Trimethylcyclohexanone, 97%
| 873-94-9 |
|
cis-4-Decenal, 98%
| 21662-09-9 |
|
Cyclohexyl bromide, 99%
| 108-85-0 |
|
Alpha, Alpha, Alpha,4-Tetrafluoro-O-Toluidine, 99%
| 393-39-5 |
|
4-Methoxy-3-Nitrobenzotrifluoride, 99%
| 394-25-2 |
|
Isatoic Anhydride, 98% (Titr.)
| 118-48-9 |
|
2,4'-Difluorobenzophenone, 98%
| 342-25-6 |
|
5-Chloro-2-(Methylamino)benzophenone, 99%
| 1022-13-5 |
|
Hydroquinone sulfonic acid, potassium salt tech.
| 21799-87-1 |
|
L-Leucyl-L-Alanine, Hydrate
| 7298-84-2 |
|
Trifluoroacetaldehyde ethyl hemiacetal, 90%
| 433-27-2 |
|
4-Sulfonic Calix[4]Arene Hydrate, 95%
| 0-01-1 |
|
(n-Propyl)triphenylphosphonium bromide, 99%
| 15912-75-1 |
|
5-Nitro-2-Furaldehyde Diacetate, 98%
| 92-55-7 |
|
3-Nitro-L-Tyrosine, 99%
| 621-44-3 |
|
2-(3-Methoxyphenyl)Cyclohexanone
| 15547-89-4 |
|
2,2'-Dihydroxy-4,4'-dimethoxybenzophenone, 98%
| 131-54-4 |
|
Hippuric Acid, 98%
| 495-69-2 |
|
Dibutyl oxalate, 99%
| 2050-60-4 |
|
N-(2-Hydroxyethyl)Morpholine, 99%
| 622-40-2 |
|
4-Methoxybenzamide (P-Anisamide), 97%
| 3424-93-9 |
|
Manganese(III) acetate dihydrate, 98%
| 993-02-2 |
|
Hexaketocyclohexane octahydrate, 97%
| 527-31-1 |
|
Prussian blue
| 14038-43-8 |
|
(S)-2-Amino-3-Methoxypropanoic Acid Hydrochloride, 98%
| 0-00-1 |
|
trans-1,2-Dichloroethylene, 99.7%, stabilized with 950 ppm BLO and
| 156-60-5 |
|
5-Bromovaleric acid, 97%
| 2067-33-6 |
|
gamma-Decalactone, 97%
| 706-14-9 |
|
Indophenol blue, 99% (uv-vis)
| 132-31-0 |
|
TETRAACETYLETHYLENEDIAMINE, 99.5+%
| 10543-57-4 |
|
Cis-2-Aminocyclohexanol Hydrochloride, 99+%
| 6936-47-6 |
|
5-Chloro-1-phenyl-1h-tetrazole, 97%
| 14210-25-4 |
|
3-Hydroxy-3-methyl-2-butanone, 92%
| 115-22-0 |
|
Precocene I, 99%
| 17598-02-6 |
|
1,3-Dichloroacetone, 99%
| 534-07-6 |
|
2,3-Pyrazinedicarboxamide, 97%
| 6164-78-9 |
|
4-Bromobenzoic Acid 97%
| 586-76-5 |
|
Molecular Sieves, 3A, 4 to 8 Mesh
| 0-00-1 |
|
M-(p-tert-butylphenoxy)benzaldehyde, 99%
| 69770-23-6 |
|
Lysergol
| 602-85-7 |
|
Poly(Vinyl Methyl Ketone) Average M.W. 500.000
| 25038-87-3 |
|
Adenine Sulfate, Dihydrate, 98% (Titr.)
| 321-30-2 |
|
2-(4-Aminophenyl)ethylamine, 95%
| 13472-00-9 |
|
|