Search   
MSDS 
:
 N-(2-Hydroxyethyl)Morpholine, 99%
CAS 
:
 622-40-2
SYNONYMS 
:
 4-Morpholinoethanol
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 622-40-2 |N-(2-Hydroxyethyl)Morpholine | 99 | 210-734-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water fog, dry
chemical, carbon dioxide or alcohol type foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 622-40-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: 1.79 mbar @ 60
Viscosity: 26.6 MPA 20.00 deg
Boiling Point: 227 deg C @ 757.00mm Hg
Freezing/Melting Point: -1 deg C
Autoignition Temperature: 205 deg C ( 401.00 deg F)
Flash Point: 99 deg C ( 210.20 deg F)
Explosion Limits, lower: 1.50 vol %
Explosion Limits, upper: 9.80 vol %
Decomposition Temperature:
Solubility in water: miscible
Specific Gravity/Density: 1.0830g/cm3
Molecular Formula: C6H13NO2
Molecular Weight: 131.17

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 622-40-2: QE3510000
LD50/LC50:
CAS# 622-40-2: Dermal, guinea pig: LD50 = 2500 mg/kg; Draize test,
rabbit, eye: 20 mg Severe; Draize test, rabbit, eye: 20 mg/24H
Moderate; Oral, rat: LD50 = 5500 mg/kg; Skin, rabbit: LD50 = >16
gm/kg.
Carcinogenicity:
N-(2-Hydroxyethyl)Morpholine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36 Irritating to eyes.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 622-40-2: 1
Canada
CAS# 622-40-2 is listed on Canada's DSL List.
CAS# 622-40-2 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 622-40-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/09/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Methacrylonitrile, 99% (stabilized with 50 ppm MEHQ) 126-98-7
Boron Trifluoride Dimethanol Complex (50-52 wt% BF3) 67-56-1
Dimethylsulfamoyl Chloride, 99% (GC) 13360-57-1
2,4-Dichloroanisole, 99+% 553-82-2
2-Fluorobenzaldehyde, 97% 446-52-6
Benzoylacetonitrile 614-16-4
3-Fluorobenzonitrile, 98% 403-54-3
3,3,5-Trimethylcyclohexanone, 97% 873-94-9
cis-4-Decenal, 98% 21662-09-9
Cyclohexyl bromide, 99% 108-85-0
Alpha, Alpha, Alpha,4-Tetrafluoro-O-Toluidine, 99% 393-39-5
4-Methoxy-3-Nitrobenzotrifluoride, 99% 394-25-2
Isatoic Anhydride, 98% (Titr.) 118-48-9
2,4'-Difluorobenzophenone, 98% 342-25-6
5-Chloro-2-(Methylamino)benzophenone, 99% 1022-13-5
Hydroquinone sulfonic acid, potassium salt tech. 21799-87-1
L-Leucyl-L-Alanine, Hydrate 7298-84-2
Trifluoroacetaldehyde ethyl hemiacetal, 90% 433-27-2
4-Sulfonic Calix[4]Arene Hydrate, 95% 0-01-1
(n-Propyl)triphenylphosphonium bromide, 99% 15912-75-1
5-Nitro-2-Furaldehyde Diacetate, 98% 92-55-7
3-Nitro-L-Tyrosine, 99% 621-44-3
2-(3-Methoxyphenyl)Cyclohexanone 15547-89-4
2,2'-Dihydroxy-4,4'-dimethoxybenzophenone, 98% 131-54-4
Hippuric Acid, 98% 495-69-2
Dibutyl oxalate, 99% 2050-60-4
N-(2-Hydroxyethyl)Morpholine, 99% 622-40-2
4-Methoxybenzamide (P-Anisamide), 97% 3424-93-9
Manganese(III) acetate dihydrate, 98% 993-02-2
Hexaketocyclohexane octahydrate, 97% 527-31-1
Prussian blue 14038-43-8
(S)-2-Amino-3-Methoxypropanoic Acid Hydrochloride, 98% 0-00-1
trans-1,2-Dichloroethylene, 99.7%, stabilized with 950 ppm BLO and 156-60-5
5-Bromovaleric acid, 97% 2067-33-6
gamma-Decalactone, 97% 706-14-9
Indophenol blue, 99% (uv-vis) 132-31-0
TETRAACETYLETHYLENEDIAMINE, 99.5+% 10543-57-4
Cis-2-Aminocyclohexanol Hydrochloride, 99+% 6936-47-6
5-Chloro-1-phenyl-1h-tetrazole, 97% 14210-25-4
3-Hydroxy-3-methyl-2-butanone, 92% 115-22-0
Precocene I, 99% 17598-02-6
1,3-Dichloroacetone, 99% 534-07-6
2,3-Pyrazinedicarboxamide, 97% 6164-78-9
4-Bromobenzoic Acid 97% 586-76-5
Molecular Sieves, 3A, 4 to 8 Mesh 0-00-1
M-(p-tert-butylphenoxy)benzaldehyde, 99% 69770-23-6
Lysergol 602-85-7
Poly(Vinyl Methyl Ketone) Average M.W. 500.000 25038-87-3
Adenine Sulfate, Dihydrate, 98% (Titr.) 321-30-2
2-(4-Aminophenyl)ethylamine, 95% 13472-00-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net