Search   
MSDS 
:
 2-Amino-2-Methyl-1-Propanol, 99%
CAS 
:
 124-68-5
SYNONYMS 
:
 2-Aminodimethylethanol; Beta-Aminoisobutanol;     2-Amino-2-Methylpropanol; 2-Amino-2-Methylpropan-1-ol;     2-Amino-2-Methyl-1-Propanol; Isobutanolamine; Isobutanol-2-Amine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 124-68-5 |2-Amino-2-Methyl-1-Propanol | 99.0 | 204-709-8
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38 52/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin. Harmful to aquatic organisms; may cause
long-term adverse effects in the aquatic environment.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Expected to be a low ingestion hazard.
Inhalation:
May cause respiratory tract irritation. Inhalation may be fatal as a
result of spasm, inflammation, edema of the larynx and bronchi,
chemical pneumonitis and pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at
least 15 minutes while removing contaminated clothing and shoes. Wash
clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Combustible
Liquid. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas. Containers may explode
when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Do NOT use straight streams of water. Cool containers
with flooding quantities of water until well after fire is out. Use
water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with skin and eyes. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Avoid contact with heat, sparks and flame. Avoid ingestion
and inhalation. Wash clothing before reuse. Do not pressurize, cut,
weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid or liquid
Color: clear, colorless
Odor: None reported.
pH: Approx. 11.3
Vapor Pressure: 1.33 hPa @ 20 deg C
Viscosity: Not available.
Boiling Point: 165 deg C @ 760.00mm Hg
Freezing/Melting Point: 31 - 32 deg C
Autoignition Temperature: Not available.
Flash Point: 67 deg C ( 152.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: miscible
Specific Gravity/Density: .9350g/cm3
Molecular Formula: (CH3)2C(NH2)CH2OH
Molecular Weight: 89.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 124-68-5: UA5950000
LD50/LC50:
Not available.
Carcinogenicity:
2-Amino-2-Methyl-1-Propanol -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
R 52/53 Harmful to aquatic organisms; may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 124-68-5: 1
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 124-68-5 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 124-68-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/19/1999 Revision #2 Date: 9/10/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Oxododecyl-beta-D-maltoside, 99+% 0-01-1
Ethyl methoxyacetate, 98% 3938-96-3
4,4-Bis(Methylthio)-2-Phenyl-But-1,3-Dien- 1,1-Dicarbonitrile, 98% 0-00-1
2-Ethyl-3-methylpyrazine, 99% 15707-23-0
2,2-Diphenylethylamine, 96% 3963-62-0
1,3-Dioxolane, 99%, Stab. With 50ppm BHT and 100ppm Triethylamine 646-06-0
3,9-Divinyl-2,4,8,10-Tetraoxaspiro 5.5 Undecane, 98% 78-19-3
Ammonium hexafluorotitanate(IV), 99.99% 16962-40-6
Trans, Trans-2,4-Heptadienal, Tech. 85-90% (GC, Total Isomers) 4313-03-5
Picolinic acid, 99% 98-98-6
2-Dodecen-1-Ylsuccinic Anhydride, Mixture of Isomers, Tech. CA 95% 26544-38-7
Anthracene-d10, 99+ atom % d 1719-06-8
3-Fluoroanisole, 99% 456-49-5
(S)-(+)-sec-Butanol, 99% 78-92-2
Acid Blue 80 4474-24-2
Dimethyl 3-Methyl-Trans-1,2-Cyclopropanedicarboxylate, 99% 28363-79-3
1-Butaneboronic acid, 99+% 4426-47-5
1-Methylcyclopentanol, 98% 1462-03-9
2-Amino-2-Methyl-1-Propanol, 99% 124-68-5
Yttrium(III) chloride hexahydrate 10025-94-2
Oxazine 4 Perchlorate, Laser Grade, 99% (UV-Vis) 41830-81-3
exo-2-Norbornyl formate, 99% 41498-71-9
Isobutyryl chloride, 98% 79-30-1
1,2,3-Trimethoxybenzene, 98% 634-36-6
Cobalt(II) chloride, anhydrous, 97% 7646-79-9
Benzyl-d7 chloride, 99+ atom % D 100-44-7
Tetrapentylammonium Chloride, 97% (Titr.) 4965-17-7
[tris(trimethylsilyl)]phosphine, 98% 15573-38-3
Quinoxaline, 99% 91-19-0
Tribromoacetaldehyde, 97% 115-17-3
Dihydro-5-phenyl-5-propyl-4,6(1h.5h)- pyrimidinedione, 99+% 59026-31-2
2-(Trifluoromethyl)benzyl alcohol, 97% 346-06-5
2,3-Dibromobutyric Acid, 98% 600-30-6
N-Tosylpyrrolidone 10019-95-1
1,2,4-Triazole, sodium derivative, tech., 90% 41253-21-8
1,3-Cyclopentanedione, 99% 3859-41-4
2-Phenylbenzothiazole, 97% 883-93-2
Diethylaminosulfur Trifluoride 38078-09-0
Chloro-dimethyl-(pentafluorophenyl)-silane , 98% 20082-71-7
Dicyanobis(1,10-Phenanthroline) Iron, Trihydrate, 99% (Titr.) 14768-11-7
(2-(1,3-Dioxan-2-yl)ethyl)triphenylphosphonium Bromide, 98% 69891-92-5
Diethyl 1,2-Cyclopropanedicarboxylate, 97% 20561-09-5
Isopropenyl chloroformate, 99% (stabilized with 50-100 ppm BHT) 57933-83-2
Crotonic acid, 98% 107-93-7
2'-(Trifluoromethyl)acetophenone, 99% 17408-14-9
4'-Iodoacetophenone, 98% 13329-40-3
Cyclooctane, 99+% 292-64-8
4-Bromo-2-Fluorocinnamic Acid, 97% (GC) 149947-19-3
Nonanoic Acid, 98+% (GC) 112-05-0
Selenium(iv) oxide, 99.999% 7446-08-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net