**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 15573-38-3 |[Tris(trimethylsilyl)]phosphine, 98% | 98 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 17
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Spontaneously flammable in air.Highly flammable.
Potential Health Effects
Eye:
May cause chemical conjunctivitis and corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
Aspiration may lead to pulmonary edema. Vapors may cause dizziness
or suffocation. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes.
Ingestion:
Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
Evacuate area and fight fire from a safe distance. As in any fire,
wear a self-contained breathing apparatus in pressure-demand,
MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors
may form an explosive mixture with air. Vapors can travel to a source
of ignition and flash back. May burn with invisible flame. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Use water spray to keep fire-exposed
containers cool. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Spontaneously
ignitable in air. Will be easily ignited by heat, sparks or flame.
Containers may explode if exposed to fire.
Extinguishing Media:
Use dry sand or earth to smother fire. For small fires, use dry
chemical, carbon dioxide, water spray or alcohol-resistant foam. In
case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Water may be ineffective. Water may spread
fire. If water is the only media available, use in flooding amounts.
For large fires, use water spray, fog or alcohol-resistant foam. Do
NOT use straight streams of water. Contact professional fire-fighters
immediately. Cool containers with flooding quantities of water until
well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up
or absorb material, then place into a suitable clean, dry, closed
container for disposal. Remove all sources of ignition. Use a
spark-proof tool. Isolate area and deny entry. Place under an inert
atmosphere. Do not use combustible materials such as paper towels to
clean up spill. A vapor suppressing foam may be used to reduce
vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Minimize dust
generation and accumulation. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Avoid contact with eyes, skin, and clothing. Avoid
contact with skin and eyes. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep away from heat,
sparks and flame. Avoid ingestion and inhalation. Handle under an
inert atmosphere. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from heat and
flame. Keep away from sources of ignition. Store in a cool, dry
place. Keep container closed when not in use. Flammables-area. Keep
refrigerated. (Store below 4C/39F.) Keep containers tightly
closed. Do not expose to air. Store under an inert atmosphere.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use explosion-proof ventilation equipment. Use adequate ventilation
to keep airborne concentrations low. Use adequate general or local
exhaust ventilation to keep airborne concentrations below the
permissible exposure limits. Use process enclosure, local exhaust
ventilation, or other engineering controls to control airborne
levels. Use adequate general or local explosion-proof ventilation to
keep airborne levels to acceptable levels.
Exposure Limits
CAS# 15573-38-3:
United Kingdom, WEL - TWA: (listed as silica, amorphous): 6 mg/m3
(inhalable dust); 2.4 mg/m3 TWA (respirable dust)
United Kingdom, WEL - STEL: (listed as silica, amorphous): 18 mg/
STEL (inhalable dust); 7.2 mg/m3 STEL (respirable dust)
Russia: (listed as silica, amorphous): 1 mg/m3 TWA
Personal Protective Equipment
Eyes:
Wear safety glasses and chemical goggles if splashing
is possible. Wear appropriate protective eyeglasses or
chemical safety goggles as described by OSHA's eye and
face protection regulations in 29 CFR 1910.133 or
European Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure. Wear appropriate gloves to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions. Follow the OSHA respirator regulations
found in 29 CFR 1910.134 or European Standard EN 149.
Use a NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 243.0 - 244.0 deg C
Freezing/Melting Point: 24 deg C
Autoignition Temperature: 20 deg C ( 68.00 deg F)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8630g/cm3
Molecular Formula: C9H27PSi3
Molecular Weight: 250.54
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Powder or liquid is
pyrophoric.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, exposure
to air, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 15573-38-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
[Tris(trimethylsilyl)]phosphine, 98% -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.2
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 17 Spontaneously flammable in air.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 15573-38-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 15573-38-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 15573-38-3 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Oxododecyl-beta-D-maltoside, 99+%
| 0-01-1 |
|
Ethyl methoxyacetate, 98%
| 3938-96-3 |
|
4,4-Bis(Methylthio)-2-Phenyl-But-1,3-Dien- 1,1-Dicarbonitrile, 98%
| 0-00-1 |
|
2-Ethyl-3-methylpyrazine, 99%
| 15707-23-0 |
|
2,2-Diphenylethylamine, 96%
| 3963-62-0 |
|
1,3-Dioxolane, 99%, Stab. With 50ppm BHT and 100ppm Triethylamine
| 646-06-0 |
|
3,9-Divinyl-2,4,8,10-Tetraoxaspiro 5.5 Undecane, 98%
| 78-19-3 |
|
Ammonium hexafluorotitanate(IV), 99.99%
| 16962-40-6 |
|
Trans, Trans-2,4-Heptadienal, Tech. 85-90% (GC, Total Isomers)
| 4313-03-5 |
|
Picolinic acid, 99%
| 98-98-6 |
|
2-Dodecen-1-Ylsuccinic Anhydride, Mixture of Isomers, Tech. CA 95%
| 26544-38-7 |
|
Anthracene-d10, 99+ atom % d
| 1719-06-8 |
|
3-Fluoroanisole, 99%
| 456-49-5 |
|
(S)-(+)-sec-Butanol, 99%
| 78-92-2 |
|
Acid Blue 80
| 4474-24-2 |
|
Dimethyl 3-Methyl-Trans-1,2-Cyclopropanedicarboxylate, 99%
| 28363-79-3 |
|
1-Butaneboronic acid, 99+%
| 4426-47-5 |
|
1-Methylcyclopentanol, 98%
| 1462-03-9 |
|
2-Amino-2-Methyl-1-Propanol, 99%
| 124-68-5 |
|
Yttrium(III) chloride hexahydrate
| 10025-94-2 |
|
Oxazine 4 Perchlorate, Laser Grade, 99% (UV-Vis)
| 41830-81-3 |
|
exo-2-Norbornyl formate, 99%
| 41498-71-9 |
|
Isobutyryl chloride, 98%
| 79-30-1 |
|
1,2,3-Trimethoxybenzene, 98%
| 634-36-6 |
|
Cobalt(II) chloride, anhydrous, 97%
| 7646-79-9 |
|
Benzyl-d7 chloride, 99+ atom % D
| 100-44-7 |
|
Tetrapentylammonium Chloride, 97% (Titr.)
| 4965-17-7 |
|
[tris(trimethylsilyl)]phosphine, 98%
| 15573-38-3 |
|
Quinoxaline, 99%
| 91-19-0 |
|
Tribromoacetaldehyde, 97%
| 115-17-3 |
|
Dihydro-5-phenyl-5-propyl-4,6(1h.5h)- pyrimidinedione, 99+%
| 59026-31-2 |
|
2-(Trifluoromethyl)benzyl alcohol, 97%
| 346-06-5 |
|
2,3-Dibromobutyric Acid, 98%
| 600-30-6 |
|
N-Tosylpyrrolidone
| 10019-95-1 |
|
1,2,4-Triazole, sodium derivative, tech., 90%
| 41253-21-8 |
|
1,3-Cyclopentanedione, 99%
| 3859-41-4 |
|
2-Phenylbenzothiazole, 97%
| 883-93-2 |
|
Diethylaminosulfur Trifluoride
| 38078-09-0 |
|
Chloro-dimethyl-(pentafluorophenyl)-silane , 98%
| 20082-71-7 |
|
Dicyanobis(1,10-Phenanthroline) Iron, Trihydrate, 99% (Titr.)
| 14768-11-7 |
|
(2-(1,3-Dioxan-2-yl)ethyl)triphenylphosphonium Bromide, 98%
| 69891-92-5 |
|
Diethyl 1,2-Cyclopropanedicarboxylate, 97%
| 20561-09-5 |
|
Isopropenyl chloroformate, 99% (stabilized with 50-100 ppm BHT)
| 57933-83-2 |
|
Crotonic acid, 98%
| 107-93-7 |
|
2'-(Trifluoromethyl)acetophenone, 99%
| 17408-14-9 |
|
4'-Iodoacetophenone, 98%
| 13329-40-3 |
|
Cyclooctane, 99+%
| 292-64-8 |
|
4-Bromo-2-Fluorocinnamic Acid, 97% (GC)
| 149947-19-3 |
|
Nonanoic Acid, 98+% (GC)
| 112-05-0 |
|
Selenium(iv) oxide, 99.999%
| 7446-08-4 |
|
|