Search   
MSDS 
:
 Anthracene-d10, 99+ atom % d
CAS 
:
 1719-06-8
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1719-06-8 |ANTHRACENE-D10 | 99+atom% | 217-004-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Contact with the skin produces a phototoxic and photoallergic
response characterized by swelling and blistering.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Prolonged or repeated exposure may cause thyroid damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. This material in sufficient quantity and reduced
particle size is capable of creating a dust explosion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 1719-06-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: beige yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: 1 mm Hg @145.0
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 218 - 220 deg C
Autoignition Temperature: Not available.
Flash Point: 121 deg C ( 249.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C14D10
Molecular Weight: 188.32

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light.
Incompatibilities with Other Materials:
Strong oxidizing agents - hypochlorites - chromic acid - fluorine.
Explodes on contact with fluorine. Combustible when exposed to heat,
flame, or oxidizing materials. Moderately explosive when exposed to
flame, calcium hypochlorite and chromic acid.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, calcium oxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1719-06-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
ANTHRACENE-D10 -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1719-06-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1719-06-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1719-06-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Oxododecyl-beta-D-maltoside, 99+% 0-01-1
Ethyl methoxyacetate, 98% 3938-96-3
4,4-Bis(Methylthio)-2-Phenyl-But-1,3-Dien- 1,1-Dicarbonitrile, 98% 0-00-1
2-Ethyl-3-methylpyrazine, 99% 15707-23-0
2,2-Diphenylethylamine, 96% 3963-62-0
1,3-Dioxolane, 99%, Stab. With 50ppm BHT and 100ppm Triethylamine 646-06-0
3,9-Divinyl-2,4,8,10-Tetraoxaspiro 5.5 Undecane, 98% 78-19-3
Ammonium hexafluorotitanate(IV), 99.99% 16962-40-6
Trans, Trans-2,4-Heptadienal, Tech. 85-90% (GC, Total Isomers) 4313-03-5
Picolinic acid, 99% 98-98-6
2-Dodecen-1-Ylsuccinic Anhydride, Mixture of Isomers, Tech. CA 95% 26544-38-7
Anthracene-d10, 99+ atom % d 1719-06-8
3-Fluoroanisole, 99% 456-49-5
(S)-(+)-sec-Butanol, 99% 78-92-2
Acid Blue 80 4474-24-2
Dimethyl 3-Methyl-Trans-1,2-Cyclopropanedicarboxylate, 99% 28363-79-3
1-Butaneboronic acid, 99+% 4426-47-5
1-Methylcyclopentanol, 98% 1462-03-9
2-Amino-2-Methyl-1-Propanol, 99% 124-68-5
Yttrium(III) chloride hexahydrate 10025-94-2
Oxazine 4 Perchlorate, Laser Grade, 99% (UV-Vis) 41830-81-3
exo-2-Norbornyl formate, 99% 41498-71-9
Isobutyryl chloride, 98% 79-30-1
1,2,3-Trimethoxybenzene, 98% 634-36-6
Cobalt(II) chloride, anhydrous, 97% 7646-79-9
Benzyl-d7 chloride, 99+ atom % D 100-44-7
Tetrapentylammonium Chloride, 97% (Titr.) 4965-17-7
[tris(trimethylsilyl)]phosphine, 98% 15573-38-3
Quinoxaline, 99% 91-19-0
Tribromoacetaldehyde, 97% 115-17-3
Dihydro-5-phenyl-5-propyl-4,6(1h.5h)- pyrimidinedione, 99+% 59026-31-2
2-(Trifluoromethyl)benzyl alcohol, 97% 346-06-5
2,3-Dibromobutyric Acid, 98% 600-30-6
N-Tosylpyrrolidone 10019-95-1
1,2,4-Triazole, sodium derivative, tech., 90% 41253-21-8
1,3-Cyclopentanedione, 99% 3859-41-4
2-Phenylbenzothiazole, 97% 883-93-2
Diethylaminosulfur Trifluoride 38078-09-0
Chloro-dimethyl-(pentafluorophenyl)-silane , 98% 20082-71-7
Dicyanobis(1,10-Phenanthroline) Iron, Trihydrate, 99% (Titr.) 14768-11-7
(2-(1,3-Dioxan-2-yl)ethyl)triphenylphosphonium Bromide, 98% 69891-92-5
Diethyl 1,2-Cyclopropanedicarboxylate, 97% 20561-09-5
Isopropenyl chloroformate, 99% (stabilized with 50-100 ppm BHT) 57933-83-2
Crotonic acid, 98% 107-93-7
2'-(Trifluoromethyl)acetophenone, 99% 17408-14-9
4'-Iodoacetophenone, 98% 13329-40-3
Cyclooctane, 99+% 292-64-8
4-Bromo-2-Fluorocinnamic Acid, 97% (GC) 149947-19-3
Nonanoic Acid, 98+% (GC) 112-05-0
Selenium(iv) oxide, 99.999% 7446-08-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net