Search   
MSDS 
:
 Titanium (IV) Oxide Anhydrous
CAS 
:
 13463-67-7
SYNONYMS 
:
 Anatase; Titania; Titanic Anhydride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13463-67-7 |Titanium Dioxide | 100 | 236-675-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
Dust may cause mechanical irritation.
Ingestion:
No hazard expected in normal industrial use. May cause
gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation:
Dust is irritating to the respiratory tract. May cause pulmonary
fibrosis and permanent damage.
Chronic:
Chronic inhalation may cause pulmonary fibrosis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Wash clothing
before reuse. Flush skin with plenty of soap and water.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Non-combustible, substance itself does not burn but may decompose
upon heating to produce irritating, corrosive and/or toxic fumes.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with skin and eyes. Keep
container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 13463-67-7:
United Kingdom, WEL - TWA: 10 mg/m3 TWA (total inhalable); 4 mg/m
TWA (respirable)
United Kingdom, WEL - STEL: 30 mg/m3 STEL (total inhalable); 12 m
STEL (respirable)
United States OSHA: 15 mg/m3 TWA (total dust)
Belgium - TWA: 10 mg/m3 VLE
France - VME: 10 mg/m3 VME (as Ti)
Malaysia: 10 mg/m3 TWA
Netherlands: 10 mg/m3 MAC
Russia: 10 mg/m3 TWA (inhalable dust)
Spain: 10 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: none reported
pH: Approximately 6 to 7
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: 4532-5432 deg F
Freezing/Melting Point: 3326-3362 deg F
Autoignition Temperature: None Reported
Flash Point: Not applicable.
Explosion Limits, lower: None Reported
Explosion Limits, upper: None Reported
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 3.84-4.26 (water=1)
Molecular Formula: TiO2
Molecular Weight: 79.8788

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
A violent or incandescent reaction with metals (aluminum, calcium,
magnesium, potassium, sodium, zinc and lithium) may occur at high
temperatures. Substance is incompatible with strong acids.
Hazardous Decomposition Products:
Titanium/titanium oxides.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13463-67-7: XR2275000
LD50/LC50:
Not available.
Carcinogenicity:
Titanium Dioxide -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 13463-67-7: 0
Canada
CAS# 13463-67-7 is listed on Canada's DSL List.
CAS# 13463-67-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13463-67-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(Methyl Sulfoxide)-D6, 99.9 Dtom % Deuterized 2206-27-1
Mucobromic acid, 99+% 488-11-9
Fast blue rr salt - tetrafluoroborate 27766-45-6
Thymol 89-83-8
5-Methyl-3-phenylisoxazole-4-carboxylic acid, 99% 1136-45-4
Tin Metal 7440-31-5
1-Dimethylamino-but-1-en-3-one, 99% (gc) 2802-08-6
Titanium (IV) Oxide Anhydrous 13463-67-7
1,5-Diphenyl-3-pentadienone 538-58-9
Gitoxigenin 545-26-6
Quinaldine, 95% (GC) 91-63-4
Bromelain 9001-00-7
Titanium(IV) chloride 7550-45-0
D,L-selenomethionine, 99+%(tlc) 2578-28-1
4-Phenylpyrimidine, 96% 3438-48-0
6-Methoxy-8-Nitroquinoline, 99% 85-81-4
1-(4'-Bromophenoxy)-1-Ethoxyethane 39255-20-4
4-Fluorophenylhydrazine Hydrochloride, 97% 823-85-8
2,4,6-Trihydroxybenzoic Acid Monohydrate, 95% 83-30-7
4-Amino-2-Butanol, 99+% 39884-48-5
Cobalt(II) Carbonate Hydrate, 47-50% Co (Dry Substance) 513-79-1
N-Fluoro-3,5-Dichloropyridinium Triflate, 90-95% 107264-06-2
1,11-Dibromoundecane, 98+% 16696-65-4
Toluene 108-88-3
Isobutyl nitrite, 94%, stabilized with 0.2% anhydrous potassium 542-56-3
3,4,5-Trimethoxytoluene, 97% 6443-69-2
Benzyltrimethylammonium dichloroiodate, 99% 114971-52-7
Dodecylamine hydrochloride, 99% 929-73-7
5-Chloromethyl-2-Oxazolidinone, 98% 22625-57-6
Malonaldehyde bis(diethyl acetal), 97% 122-31-6
Lithium tri-tert-butoxyaluminohydride, 93- 98% 17476-04-9
5-Norbornene-2,3-dicarboxylic anhydride, 99% (titr.) 826-62-0
3-Carboxy-proxyl, free radical 2154-68-9
4,4-Dimethyl-2-pentanone, 99% 590-50-1
2-(2-Aminothiazole-4-yl)-2-Methoxyiminoacetic Acid, 97% 65872-41-5
3-Fluorobenzaldehyde, 98+% 456-48-4
Nitrobenzene-d5, 99 atom % d 4165-60-0
3-Methoxy-2-nitrobenzoic acid, 99% 4920-80-3
3-Ethyl-2-Methylbenzoxazolium Iodide, 97% (titr.) 5260-37-7
Bicine, 99+% 150-25-4
Dimethylaminoacetonitrile, 98% 926-64-7
Aq 29d
S-Propionylthiocholine Iodide, 98% 1866-73-5
Iodomethane-d3, 99+ atom % D 74-88-4
Tricresyl Phosphate 78-30-8
Tetrahydropyran, 99+% 142-68-7
Methylenediphosphonic acid, 98 % 1984-15-2
Flavine-adenine dinucleotide, 96% (uv-vis) 146-14-5
Biphenyldiisopropylsilyl chloride
Benzyltributylammonium Bromide, 99% 25316-59-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net