Search   
MSDS 
:
 1-Dimethylamino-but-1-en-3-one, 99% (gc)
CAS 
:
 2802-08-6
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2802-08-6 |1-Dimethylamino-but-1-en-3-one | 99.0 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
No information regarding eye irritation and other potential effects
was found.
Skin:
No information regarding skin irritation and other potential effects
was found.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill using an absorbent, non-combustible material such as
earth, sand, or vermiculite. Do not use combustible materials such
as sawdust.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2802-08-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear red-brown
Odor: Sweet odor.
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9600g/cm3
Molecular Formula: C6H11NO
Molecular Weight: 113.16

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2802-08-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Dimethylamino-but-1-en-3-one -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2802-08-6: 2
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2802-08-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2802-08-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/07/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(Methyl Sulfoxide)-D6, 99.9 Dtom % Deuterized 2206-27-1
Mucobromic acid, 99+% 488-11-9
Fast blue rr salt - tetrafluoroborate 27766-45-6
Thymol 89-83-8
5-Methyl-3-phenylisoxazole-4-carboxylic acid, 99% 1136-45-4
Tin Metal 7440-31-5
1-Dimethylamino-but-1-en-3-one, 99% (gc) 2802-08-6
Titanium (IV) Oxide Anhydrous 13463-67-7
1,5-Diphenyl-3-pentadienone 538-58-9
Gitoxigenin 545-26-6
Quinaldine, 95% (GC) 91-63-4
Bromelain 9001-00-7
Titanium(IV) chloride 7550-45-0
D,L-selenomethionine, 99+%(tlc) 2578-28-1
4-Phenylpyrimidine, 96% 3438-48-0
6-Methoxy-8-Nitroquinoline, 99% 85-81-4
1-(4'-Bromophenoxy)-1-Ethoxyethane 39255-20-4
4-Fluorophenylhydrazine Hydrochloride, 97% 823-85-8
2,4,6-Trihydroxybenzoic Acid Monohydrate, 95% 83-30-7
4-Amino-2-Butanol, 99+% 39884-48-5
Cobalt(II) Carbonate Hydrate, 47-50% Co (Dry Substance) 513-79-1
N-Fluoro-3,5-Dichloropyridinium Triflate, 90-95% 107264-06-2
1,11-Dibromoundecane, 98+% 16696-65-4
Toluene 108-88-3
Isobutyl nitrite, 94%, stabilized with 0.2% anhydrous potassium 542-56-3
3,4,5-Trimethoxytoluene, 97% 6443-69-2
Benzyltrimethylammonium dichloroiodate, 99% 114971-52-7
Dodecylamine hydrochloride, 99% 929-73-7
5-Chloromethyl-2-Oxazolidinone, 98% 22625-57-6
Malonaldehyde bis(diethyl acetal), 97% 122-31-6
Lithium tri-tert-butoxyaluminohydride, 93- 98% 17476-04-9
5-Norbornene-2,3-dicarboxylic anhydride, 99% (titr.) 826-62-0
3-Carboxy-proxyl, free radical 2154-68-9
4,4-Dimethyl-2-pentanone, 99% 590-50-1
2-(2-Aminothiazole-4-yl)-2-Methoxyiminoacetic Acid, 97% 65872-41-5
3-Fluorobenzaldehyde, 98+% 456-48-4
Nitrobenzene-d5, 99 atom % d 4165-60-0
3-Methoxy-2-nitrobenzoic acid, 99% 4920-80-3
3-Ethyl-2-Methylbenzoxazolium Iodide, 97% (titr.) 5260-37-7
Bicine, 99+% 150-25-4
Dimethylaminoacetonitrile, 98% 926-64-7
Aq 29d
S-Propionylthiocholine Iodide, 98% 1866-73-5
Iodomethane-d3, 99+ atom % D 74-88-4
Tricresyl Phosphate 78-30-8
Tetrahydropyran, 99+% 142-68-7
Methylenediphosphonic acid, 98 % 1984-15-2
Flavine-adenine dinucleotide, 96% (uv-vis) 146-14-5
Biphenyldiisopropylsilyl chloride
Benzyltributylammonium Bromide, 99% 25316-59-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net