Search   
MSDS 
:
 Mucobromic acid, 99+%
CAS 
:
 488-11-9
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 488-11-9 |Mucobromic acid | 99.0+ | 207-670-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Use with adequate
ventilation. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 488-11-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Wear a NIOSH/MSHA
or European Standard EN 149 approved full-facepiece
airline respirator in the positive pressure mode with
emergency escape provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Flakes
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 122.00 - 124.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C4H2Br2O3
Molecular Weight: 257.86

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 488-11-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Mucobromic acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 488-11-9: No information available.
Canada
CAS# 488-11-9 is listed on Canada's NDSL List.
CAS# 488-11-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 488-11-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/01/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(Methyl Sulfoxide)-D6, 99.9 Dtom % Deuterized 2206-27-1
Mucobromic acid, 99+% 488-11-9
Fast blue rr salt - tetrafluoroborate 27766-45-6
Thymol 89-83-8
5-Methyl-3-phenylisoxazole-4-carboxylic acid, 99% 1136-45-4
Tin Metal 7440-31-5
1-Dimethylamino-but-1-en-3-one, 99% (gc) 2802-08-6
Titanium (IV) Oxide Anhydrous 13463-67-7
1,5-Diphenyl-3-pentadienone 538-58-9
Gitoxigenin 545-26-6
Quinaldine, 95% (GC) 91-63-4
Bromelain 9001-00-7
Titanium(IV) chloride 7550-45-0
D,L-selenomethionine, 99+%(tlc) 2578-28-1
4-Phenylpyrimidine, 96% 3438-48-0
6-Methoxy-8-Nitroquinoline, 99% 85-81-4
1-(4'-Bromophenoxy)-1-Ethoxyethane 39255-20-4
4-Fluorophenylhydrazine Hydrochloride, 97% 823-85-8
2,4,6-Trihydroxybenzoic Acid Monohydrate, 95% 83-30-7
4-Amino-2-Butanol, 99+% 39884-48-5
Cobalt(II) Carbonate Hydrate, 47-50% Co (Dry Substance) 513-79-1
N-Fluoro-3,5-Dichloropyridinium Triflate, 90-95% 107264-06-2
1,11-Dibromoundecane, 98+% 16696-65-4
Toluene 108-88-3
Isobutyl nitrite, 94%, stabilized with 0.2% anhydrous potassium 542-56-3
3,4,5-Trimethoxytoluene, 97% 6443-69-2
Benzyltrimethylammonium dichloroiodate, 99% 114971-52-7
Dodecylamine hydrochloride, 99% 929-73-7
5-Chloromethyl-2-Oxazolidinone, 98% 22625-57-6
Malonaldehyde bis(diethyl acetal), 97% 122-31-6
Lithium tri-tert-butoxyaluminohydride, 93- 98% 17476-04-9
5-Norbornene-2,3-dicarboxylic anhydride, 99% (titr.) 826-62-0
3-Carboxy-proxyl, free radical 2154-68-9
4,4-Dimethyl-2-pentanone, 99% 590-50-1
2-(2-Aminothiazole-4-yl)-2-Methoxyiminoacetic Acid, 97% 65872-41-5
3-Fluorobenzaldehyde, 98+% 456-48-4
Nitrobenzene-d5, 99 atom % d 4165-60-0
3-Methoxy-2-nitrobenzoic acid, 99% 4920-80-3
3-Ethyl-2-Methylbenzoxazolium Iodide, 97% (titr.) 5260-37-7
Bicine, 99+% 150-25-4
Dimethylaminoacetonitrile, 98% 926-64-7
Aq 29d
S-Propionylthiocholine Iodide, 98% 1866-73-5
Iodomethane-d3, 99+ atom % D 74-88-4
Tricresyl Phosphate 78-30-8
Tetrahydropyran, 99+% 142-68-7
Methylenediphosphonic acid, 98 % 1984-15-2
Flavine-adenine dinucleotide, 96% (uv-vis) 146-14-5
Biphenyldiisopropylsilyl chloride
Benzyltributylammonium Bromide, 99% 25316-59-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net