Search   
MSDS 
:
 Phenyl Chlorothioformate, 98% (Titr.)
CAS 
:
 13464-19-2
SYNONYMS 
:
 Carbonochloridothioic Acid; S-Phenyl Ester.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13464-19-2 |Carbonochloridothioic Acid, S-Phenyl E| 98 | 236-679-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.Stench.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Discard contaminated clothing in a manner
which limits further exposure. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Use with adequate
ventilation. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 13464-19-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 107 deg C @ 10.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: None available.
Flash Point: None available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H5ClOS
Molecular Weight: 172.63

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 13464-19-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Carbonochloridothioic Acid, S-Phenyl Ester -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 13464-19-2: No information available.
Canada
CAS# 13464-19-2 is listed on Canada's NDSL List.
CAS# 13464-19-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13464-19-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/30/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(2r,3r)-(+)-2,3-epoxybutan, 97% 1758-32-3
3-Aminopyridine, 99% 462-08-8
2-Amino-6-Hydroxy-8-Mercaptopurine, 97% 28128-40-7
n-Octyl-tetraoxyethylene, 94% 19327-39-0
Ethyl Fluoroacetate, 97% 459-72-3
d-(-)Arginine hydrochloride 627-75-8
1,2-Dibromo-1,2-diphenylethane, 96% 5789-30-0
Chromotrope 2R 4197-07-3
Gluconic acid, potassium salt, 99% 299-27-4
Thioxanthen-9-One, 98% 492-22-8
2-Hydroxyethyl methacrylate, stabilized with 200-700 ppm MEHQ 150-76-5
Poly(ethylene), high density, average m.w. 125000 9002-88-4
4-Tert.-Amylcyclohexanone, 98+% 16587-71-6
1,8-Dibromooctane, 98% 4549-32-0
Methyl nicotinoylacetate 54950-20-8
3-Ethyl-3-pentanol, 98% 597-49-9
Polysulfone Resin, Sec. Stand., Typical M. W. 67000, Typical M.N. 25135-51-7
1,6-Diisocyanatohexane, 99+% (GC) 822-06-0
3,5-Dimethylthiophenol, 98% 38360-81-5
Indium atomic absorption standard solution, 1 mg/ml In in 2% HNO3 7440-74-6
4-Carboxy-2,2,5,5-tetramethyl-3-imidazoline-3-oxide-1-oxyl, free
Lidoflazine, 98.5% 3416-26-0
N-(3-Aminopropyl)Methacrylamide Hydro-chloride, 99% (Titr.) 72607-53-5
o-Nitrophenyl-beta-D-galactopyranoside, 99+% 369-07-3
2-Benzylaminopyridine, 98% 6935-27-9
Tribromoacetic Acid, 99% 75-96-7
4-Chlorophenol, 99+% 106-48-9
3-Diethylaminopropylamine, 99+% 104-78-9
2,3-Diphenyl-1-Indenone, 97% 1801-42-9
4-Benzoylpiperidine hydrochloride,98% 72034-25-4
2,6-Dimethylanisole, 98.5% 1004-66-6
Xanthen-9-one 90-47-1
(-)-Carveol 98%, mixture of isomers 99-48-9
Isethionic acid, sodium salt, 98% 1562-00-1
Ethyl Caproate, 99+% 123-66-0
Phenyl Chlorothioformate, 98% (Titr.) 13464-19-2
Ethyl Sulfide, 98% 352-93-2
Poly(2-Acrylamido-2-Methyl-1-Propanesulfonic Acid), 10 Wt% Solution 7732-18-5
4-Aminophenylmercuric Acetate, Tech. 6283-24-5
Dimethyl adipate 627-93-0
Triphenylene, 98% 217-59-4
Niobium (V) Chloride, 99.8% 10026-12-7
Sym.-Diformylhydrazine, 97% 628-36-4
Copper Phthalocyanine Tetrasulfonic Acid Tetrasodium Salt, 60% 27360-85-6
(4R,5R)-4,5-Di(Dimethylaminocarbonyl)-2,2-Dimethyldioxolane, 99+% 63126-29-4
Iron (iii) citrate hydrate 17217-76-4
Naphthochrome Green 5715-76-4
Acetylenedicarboxylic acid, monopotassium salt, 98+ % 928-04-1
2-(4-Iodophenyl)-3-(4-nitrophenyl)-5- phenyltetrazolium chloride 146-68-9
2,2'-Dithiobis(1-aminonaphthalene), (dtan) 38262-57-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net