**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 459-72-3 |Ethyl Fluoroacetate | 97 | 207-297-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 10 26/27/28
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable. Very toxic by inhalation, in contact with skin and if
swallowed.The toxicological properties of this material have not been
fully investigated.
Potential Health Effects
Eye:
Lachrymator (substance which increases the flow of tears). May
cause irritation, pain, blurred vision, and possible burns.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. May cause cardiac
disturbances. The toxicological properties of this substance have not
been fully investigated. May cause central nervous system depression.
May cause cardiac and/or respiratory paralysis resulting in
suffocation.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Exposure produces
central nervous system depression. Vapors may cause dizziness or
suffocation. May cause cardiac abnormalities.
Chronic:
May cause digestive tract and cardiac disturbances.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 459-72-3:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: acetic odor
pH: Not available.
Vapor Pressure: 3.7 hPa @ 20 C
Viscosity: Not available.
Boiling Point: 119.2 deg C @ 753.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 30 deg C ( 86.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: decomposes in water
Specific Gravity/Density: 1.0980g/cm3
Molecular Formula: C4H7FO2
Molecular Weight: 106.10
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 459-72-3: AH7175000
LD50/LC50:
Not available.
Oral, rat: LD50=4680ug/kg--Taken from Fluoroacetic Acid which almost
has identical LD50
Carcinogenicity:
Ethyl Fluoroacetate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC LIQUID, FLAMMABLE, ORGANIC, N.O.S.*
Hazard Class: 6.1 (3)
UN Number: 2929
Packing Group: II
IMO
Shipping Name: TOXIC LIQUID, FLAMMABLE, ORGANIC, N.O.S.
Hazard Class: 6.1 (3)
UN Number: 2929
Packing Group: II
RID/ADR
Shipping Name: TOXIC LIQUID, FLAMMABLE, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2929
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 10 Flammable.
R 26/27/28 Very toxic by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 459-72-3: No information available.
Canada
CAS# 459-72-3 is listed on Canada's NDSL List.
CAS# 459-72-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 459-72-3 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/11/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
(2r,3r)-(+)-2,3-epoxybutan, 97%
| 1758-32-3 |
|
3-Aminopyridine, 99%
| 462-08-8 |
|
2-Amino-6-Hydroxy-8-Mercaptopurine, 97%
| 28128-40-7 |
|
n-Octyl-tetraoxyethylene, 94%
| 19327-39-0 |
|
Ethyl Fluoroacetate, 97%
| 459-72-3 |
|
d-(-)Arginine hydrochloride
| 627-75-8 |
|
1,2-Dibromo-1,2-diphenylethane, 96%
| 5789-30-0 |
|
Chromotrope 2R
| 4197-07-3 |
|
Gluconic acid, potassium salt, 99%
| 299-27-4 |
|
Thioxanthen-9-One, 98%
| 492-22-8 |
|
2-Hydroxyethyl methacrylate, stabilized with 200-700 ppm MEHQ
| 150-76-5 |
|
Poly(ethylene), high density, average m.w. 125000
| 9002-88-4 |
|
4-Tert.-Amylcyclohexanone, 98+%
| 16587-71-6 |
|
1,8-Dibromooctane, 98%
| 4549-32-0 |
|
Methyl nicotinoylacetate
| 54950-20-8 |
|
3-Ethyl-3-pentanol, 98%
| 597-49-9 |
|
Polysulfone Resin, Sec. Stand., Typical M. W. 67000, Typical M.N.
| 25135-51-7 |
|
1,6-Diisocyanatohexane, 99+% (GC)
| 822-06-0 |
|
3,5-Dimethylthiophenol, 98%
| 38360-81-5 |
|
Indium atomic absorption standard solution, 1 mg/ml In in 2% HNO3
| 7440-74-6 |
|
4-Carboxy-2,2,5,5-tetramethyl-3-imidazoline-3-oxide-1-oxyl, free
| |
|
Lidoflazine, 98.5%
| 3416-26-0 |
|
N-(3-Aminopropyl)Methacrylamide Hydro-chloride, 99% (Titr.)
| 72607-53-5 |
|
o-Nitrophenyl-beta-D-galactopyranoside, 99+%
| 369-07-3 |
|
2-Benzylaminopyridine, 98%
| 6935-27-9 |
|
Tribromoacetic Acid, 99%
| 75-96-7 |
|
4-Chlorophenol, 99+%
| 106-48-9 |
|
3-Diethylaminopropylamine, 99+%
| 104-78-9 |
|
2,3-Diphenyl-1-Indenone, 97%
| 1801-42-9 |
|
4-Benzoylpiperidine hydrochloride,98%
| 72034-25-4 |
|
2,6-Dimethylanisole, 98.5%
| 1004-66-6 |
|
Xanthen-9-one
| 90-47-1 |
|
(-)-Carveol 98%, mixture of isomers
| 99-48-9 |
|
Isethionic acid, sodium salt, 98%
| 1562-00-1 |
|
Ethyl Caproate, 99+%
| 123-66-0 |
|
Phenyl Chlorothioformate, 98% (Titr.)
| 13464-19-2 |
|
Ethyl Sulfide, 98%
| 352-93-2 |
|
Poly(2-Acrylamido-2-Methyl-1-Propanesulfonic Acid), 10 Wt% Solution
| 7732-18-5 |
|
4-Aminophenylmercuric Acetate, Tech.
| 6283-24-5 |
|
Dimethyl adipate
| 627-93-0 |
|
Triphenylene, 98%
| 217-59-4 |
|
Niobium (V) Chloride, 99.8%
| 10026-12-7 |
|
Sym.-Diformylhydrazine, 97%
| 628-36-4 |
|
Copper Phthalocyanine Tetrasulfonic Acid Tetrasodium Salt, 60%
| 27360-85-6 |
|
(4R,5R)-4,5-Di(Dimethylaminocarbonyl)-2,2-Dimethyldioxolane, 99+%
| 63126-29-4 |
|
Iron (iii) citrate hydrate
| 17217-76-4 |
|
Naphthochrome Green
| 5715-76-4 |
|
Acetylenedicarboxylic acid, monopotassium salt, 98+ %
| 928-04-1 |
|
2-(4-Iodophenyl)-3-(4-nitrophenyl)-5- phenyltetrazolium chloride
| 146-68-9 |
|
2,2'-Dithiobis(1-aminonaphthalene), (dtan)
| 38262-57-6 |
|
|