**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 928-04-1 |Acetylenedicarboxylic acid, monopotass| >98 | 213-169-2 |
| |ium salt | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed.
Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated. Causes moderate skin
irritation and has been shown to be absorbed through the skin in
animals.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 928-04-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density:
Molecular Formula: HO2CC~2CCO2K
Molecular Weight: 152.15
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 928-04-1: AP0700000
LD50/LC50:
CAS# 928-04-1: Dermal, guinea pig: LD50 = 25 mg/kg; Oral, mouse:
LD50 = 63 mg/kg.
Dermal LD50 (guinea pigs) =25-50
Carcinogenicity:
Acetylenedicarboxylic acid, monopotassium salt -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
Safety Phrases:
S 22 Do not breathe dust.
S 28A After contact with skin, wash immediately with
plenty of water.
S 29 Do not empty into drains.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 928-04-1: No information available.
Canada
CAS# 928-04-1 is listed on Canada's NDSL List.
CAS# 928-04-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 928-04-1 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 7/30/1998 Revision #3 Date: 10/07/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
(2r,3r)-(+)-2,3-epoxybutan, 97%
| 1758-32-3 |
|
3-Aminopyridine, 99%
| 462-08-8 |
|
2-Amino-6-Hydroxy-8-Mercaptopurine, 97%
| 28128-40-7 |
|
n-Octyl-tetraoxyethylene, 94%
| 19327-39-0 |
|
Ethyl Fluoroacetate, 97%
| 459-72-3 |
|
d-(-)Arginine hydrochloride
| 627-75-8 |
|
1,2-Dibromo-1,2-diphenylethane, 96%
| 5789-30-0 |
|
Chromotrope 2R
| 4197-07-3 |
|
Gluconic acid, potassium salt, 99%
| 299-27-4 |
|
Thioxanthen-9-One, 98%
| 492-22-8 |
|
2-Hydroxyethyl methacrylate, stabilized with 200-700 ppm MEHQ
| 150-76-5 |
|
Poly(ethylene), high density, average m.w. 125000
| 9002-88-4 |
|
4-Tert.-Amylcyclohexanone, 98+%
| 16587-71-6 |
|
1,8-Dibromooctane, 98%
| 4549-32-0 |
|
Methyl nicotinoylacetate
| 54950-20-8 |
|
3-Ethyl-3-pentanol, 98%
| 597-49-9 |
|
Polysulfone Resin, Sec. Stand., Typical M. W. 67000, Typical M.N.
| 25135-51-7 |
|
1,6-Diisocyanatohexane, 99+% (GC)
| 822-06-0 |
|
3,5-Dimethylthiophenol, 98%
| 38360-81-5 |
|
Indium atomic absorption standard solution, 1 mg/ml In in 2% HNO3
| 7440-74-6 |
|
4-Carboxy-2,2,5,5-tetramethyl-3-imidazoline-3-oxide-1-oxyl, free
| |
|
Lidoflazine, 98.5%
| 3416-26-0 |
|
N-(3-Aminopropyl)Methacrylamide Hydro-chloride, 99% (Titr.)
| 72607-53-5 |
|
o-Nitrophenyl-beta-D-galactopyranoside, 99+%
| 369-07-3 |
|
2-Benzylaminopyridine, 98%
| 6935-27-9 |
|
Tribromoacetic Acid, 99%
| 75-96-7 |
|
4-Chlorophenol, 99+%
| 106-48-9 |
|
3-Diethylaminopropylamine, 99+%
| 104-78-9 |
|
2,3-Diphenyl-1-Indenone, 97%
| 1801-42-9 |
|
4-Benzoylpiperidine hydrochloride,98%
| 72034-25-4 |
|
2,6-Dimethylanisole, 98.5%
| 1004-66-6 |
|
Xanthen-9-one
| 90-47-1 |
|
(-)-Carveol 98%, mixture of isomers
| 99-48-9 |
|
Isethionic acid, sodium salt, 98%
| 1562-00-1 |
|
Ethyl Caproate, 99+%
| 123-66-0 |
|
Phenyl Chlorothioformate, 98% (Titr.)
| 13464-19-2 |
|
Ethyl Sulfide, 98%
| 352-93-2 |
|
Poly(2-Acrylamido-2-Methyl-1-Propanesulfonic Acid), 10 Wt% Solution
| 7732-18-5 |
|
4-Aminophenylmercuric Acetate, Tech.
| 6283-24-5 |
|
Dimethyl adipate
| 627-93-0 |
|
Triphenylene, 98%
| 217-59-4 |
|
Niobium (V) Chloride, 99.8%
| 10026-12-7 |
|
Sym.-Diformylhydrazine, 97%
| 628-36-4 |
|
Copper Phthalocyanine Tetrasulfonic Acid Tetrasodium Salt, 60%
| 27360-85-6 |
|
(4R,5R)-4,5-Di(Dimethylaminocarbonyl)-2,2-Dimethyldioxolane, 99+%
| 63126-29-4 |
|
Iron (iii) citrate hydrate
| 17217-76-4 |
|
Naphthochrome Green
| 5715-76-4 |
|
Acetylenedicarboxylic acid, monopotassium salt, 98+ %
| 928-04-1 |
|
2-(4-Iodophenyl)-3-(4-nitrophenyl)-5- phenyltetrazolium chloride
| 146-68-9 |
|
2,2'-Dithiobis(1-aminonaphthalene), (dtan)
| 38262-57-6 |
|
|