Search   
MSDS 
:
 Poly(2-Acrylamido-2-Methyl-1-Propanesulfonic Acid), 10 Wt% Solution
CAS 
:
 7732-18-5
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | 90 | 231-791-2 |
|----------------|--------------------------------------|----------|-----------|
| 27119-07-9 |2-acrylamido-2- methylpropanesulfonic | 10 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use
extinguishing media appropriate to the surrounding fire. Substance is
noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7732-18-5:

CAS# 27119-07-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear almost colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: Solution
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7732-18-5: ZC0110000
CAS# 27119-07-9 unlisted.
LD50/LC50:
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
CAS# 27119-07-9.
Carcinogenicity:
Water -
Not listed by ACGIH, IARC, or NTP.
2-acrylamido-2- methylpropanesulfonic aicd polymer -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7732-18-5: No information available.
CAS# 27119-07-9: No information available.
Canada
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 27119-07-9 is listed on Canada's DSL List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 27119-07-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7732-18-5 is listed on the TSCA inventory.
CAS# 27119-07-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 5/19/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(2r,3r)-(+)-2,3-epoxybutan, 97% 1758-32-3
3-Aminopyridine, 99% 462-08-8
2-Amino-6-Hydroxy-8-Mercaptopurine, 97% 28128-40-7
n-Octyl-tetraoxyethylene, 94% 19327-39-0
Ethyl Fluoroacetate, 97% 459-72-3
d-(-)Arginine hydrochloride 627-75-8
1,2-Dibromo-1,2-diphenylethane, 96% 5789-30-0
Chromotrope 2R 4197-07-3
Gluconic acid, potassium salt, 99% 299-27-4
Thioxanthen-9-One, 98% 492-22-8
2-Hydroxyethyl methacrylate, stabilized with 200-700 ppm MEHQ 150-76-5
Poly(ethylene), high density, average m.w. 125000 9002-88-4
4-Tert.-Amylcyclohexanone, 98+% 16587-71-6
1,8-Dibromooctane, 98% 4549-32-0
Methyl nicotinoylacetate 54950-20-8
3-Ethyl-3-pentanol, 98% 597-49-9
Polysulfone Resin, Sec. Stand., Typical M. W. 67000, Typical M.N. 25135-51-7
1,6-Diisocyanatohexane, 99+% (GC) 822-06-0
3,5-Dimethylthiophenol, 98% 38360-81-5
Indium atomic absorption standard solution, 1 mg/ml In in 2% HNO3 7440-74-6
4-Carboxy-2,2,5,5-tetramethyl-3-imidazoline-3-oxide-1-oxyl, free
Lidoflazine, 98.5% 3416-26-0
N-(3-Aminopropyl)Methacrylamide Hydro-chloride, 99% (Titr.) 72607-53-5
o-Nitrophenyl-beta-D-galactopyranoside, 99+% 369-07-3
2-Benzylaminopyridine, 98% 6935-27-9
Tribromoacetic Acid, 99% 75-96-7
4-Chlorophenol, 99+% 106-48-9
3-Diethylaminopropylamine, 99+% 104-78-9
2,3-Diphenyl-1-Indenone, 97% 1801-42-9
4-Benzoylpiperidine hydrochloride,98% 72034-25-4
2,6-Dimethylanisole, 98.5% 1004-66-6
Xanthen-9-one 90-47-1
(-)-Carveol 98%, mixture of isomers 99-48-9
Isethionic acid, sodium salt, 98% 1562-00-1
Ethyl Caproate, 99+% 123-66-0
Phenyl Chlorothioformate, 98% (Titr.) 13464-19-2
Ethyl Sulfide, 98% 352-93-2
Poly(2-Acrylamido-2-Methyl-1-Propanesulfonic Acid), 10 Wt% Solution 7732-18-5
4-Aminophenylmercuric Acetate, Tech. 6283-24-5
Dimethyl adipate 627-93-0
Triphenylene, 98% 217-59-4
Niobium (V) Chloride, 99.8% 10026-12-7
Sym.-Diformylhydrazine, 97% 628-36-4
Copper Phthalocyanine Tetrasulfonic Acid Tetrasodium Salt, 60% 27360-85-6
(4R,5R)-4,5-Di(Dimethylaminocarbonyl)-2,2-Dimethyldioxolane, 99+% 63126-29-4
Iron (iii) citrate hydrate 17217-76-4
Naphthochrome Green 5715-76-4
Acetylenedicarboxylic acid, monopotassium salt, 98+ % 928-04-1
2-(4-Iodophenyl)-3-(4-nitrophenyl)-5- phenyltetrazolium chloride 146-68-9
2,2'-Dithiobis(1-aminonaphthalene), (dtan) 38262-57-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net