**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13815-94-6 |Ruthenium(III) Chloride Trihydrate | ca 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Hygroscopic (absorbs moisture from the air).Corrosive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Use with adequate ventilation.
Discard contaminated shoes.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Corrosives area. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 13815-94-6:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystalline powder
Color: black
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: Cl3Ru.3H2O
Molecular Weight: 261.47
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, zinc.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, oxides of chlorine, ruthenium
oxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 13815-94-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Ruthenium(III) Chloride Trihydrate -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28 After contact with skin, wash immediately
with...
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 13815-94-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13815-94-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13815-94-6 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 5/21/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Aliquat 336
| 5137-55-3 |
|
4,4'-Isopropylidenebis(2-(2,6-Dibromophenoxy)Ethanol), 98%
| 4162-45-2 |
|
4-Benzylpyridine, 97%
| 2116-65-6 |
|
Bis(Dibenzylideneacetone)Palladium
| 32005-36-0 |
|
Lucifer Yellow CH
| 67769-47-5 |
|
1-Oxododecyl-beta-D-glucopyranoside, 99+%
| 64395-92-2 |
|
Alpha Apo Oxytetracycline,"Can be Used as Secondary Standard"
| 18695-01-7 |
|
Dimethyl carbonate, 99%
| 616-38-6 |
|
2-Nitrodiphenylamine, 99% (UV-Vis)
| 119-75-5 |
|
Diethylaluminum iodide, 25 wt% solution in toluene
| 108-88-3 |
|
2,3-Dihydro-2-Thioxo-4-Thiazoleacetic Acid Ethyl Ester, 96% (Titr.)
| 38449-49-9 |
|
Harmol hydrochloride dihydrate
| 40580-83-4 |
|
Iridium, powder, 99.9%
| 7439-88-5 |
|
Phthalimide, Potassium Derivative, 99%
| 1074-82-4 |
|
Phenethyl alcohol, 99%
| 60-12-8 |
|
1,8-Diaminonaphthalene
| 479-27-6 |
|
Ruthenium(III) Chloride Trihydrate
| 13815-94-6 |
|
2-Chloro-6-Fluorobenzaldehyde, 95%
| 387-45-1 |
|
2-Propylpentanoic acid, 99%
| 99-66-1 |
|
Chrysophanic acid
| 481-74-3 |
|
Tetracarbonyldi-Mu-Chlorodirhodium (I)
| 14523-22-9 |
|
4-tert-Butylcalix (8)Arene, 97% (elemental analysis)
| 68971-82-4 |
|
4-Chlorobenzyl cyanide, 98+%
| 140-53-4 |
|
4,4'-Methylene-Bis-(2,6-Diethylaniline), 99%
| 13680-35-8 |
|
Dl-lysine monohydrochoride
| 70-53-1 |
|
5-Bromoindole-3-Acetic Acid, 99% (Titr.)
| 40432-84-6 |
|
Guanine, 99+%
| 73-40-5 |
|
3,4-Dimethoxyphenol, 97%
| 2033-89-8 |
|
4-Aminobenzo-18-Crown-6, Sesquihydrate, Hydrochloride, 99% (TLC)
| 0-00-1 |
|
Xylidine ponceau 2r
| 3761-53-3 |
|
DL-N-Acetylhomocysteine Thiolactone, 99%
| 17896-21-8 |
|
2-Methyl-2-Oxazoline, 99% (GC)
| 1120-64-5 |
|
1,3-Diethyl-2-thiourea
| 105-55-5 |
|
Acridine Hydrochloride, 97%
| 17784-47-3 |
|
4-Iodobenzonitrile
| 3058-39-7 |
|
4-Vinylbenzo-15-Crown-5, 97%
| 31943-70-1 |
|
3-Anilinopropionitrile, 98%
| 1075-76-9 |
|
Heptafluorobutyric anhydride, 98+%
| 336-59-4 |
|
Magnesium stearate
| 557-04-0 |
|
Methoxyacetyl chloride, stabilized, ca. 95%
| 38870-89-2 |
|
Poly(styrene), secondary standard m.w. 430.100/m.n. 119.600
| 9003-53-6 |
|
3-Chloropropyl thioacetate, tech., 90+%
| 13012-54-9 |
|
2-Methyl-1-Pentanol, 98.5+%
| 105-30-6 |
|
Alpha-Acetoxy-Isobutyryl Bromide, 91% Balance Chlorine Derivative
| 40635-67-4 |
|
3-Amino-5-Hydroxypyrazole, 98%
| 6126-22-3 |
|
6-Hydroxy-1,3-Benzoxathiol-2-One, 98+%
| 4991-65-5 |
|
Vanadium(III) chloride, 99%
| 7718-98-1 |
|
N-Isopropylhydroxylamine Hydrochloride, 97%
| 50632-53-6 |
|
Methyl 3-chlorobenzoate, 98%
| 2905-65-9 |
|
1-Pyrrolyl-borane, 1m sol in THF.
| 45376-40-7 |
|
|