Search   
MSDS 
:
 Tetracarbonyldi-Mu-Chlorodirhodium (I)
CAS 
:
 14523-22-9
SYNONYMS 
:
 Rhodium Carbonyl Chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 14523-22-9 |Tetracarbonyldi-Mu-Chlorodirhodium(I) | ca. 100% | 238-540-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed. Irritating to eyes and skin.Moisture
sensitive.The toxicological properties of this material have not been
fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause cardiac
disturbances. The toxicological properties of this substance have not
been fully investigated. May cause central nervous system depression.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May cause cardiac
abnormalities. Inhalation at high concentrations may cause CNS
depression and asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Containers
may explode when heated. Non-combustible, substance itself does not
burn but may decompose upon heating to produce corrosive and/or
toxic fumes. Runoff from fire control or dilution water may cause
pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Do NOT get water
inside containers. For small fires, use dry chemical, carbon
dioxide, or water spray. For large fires, use dry chemical, carbon
dioxide, alcohol-resistant foam, or water spray.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Do not allow contact with water. Keep from contact
with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.) Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 14523-22-9:
United Kingdom, WEL - TWA: (listed as rhodium): 0.1 mg/m3 TWA (du
and fume)
United Kingdom, WEL - STEL: (listed as rhodium): 0.3 mg/m3 STEL (
and fume)
United States OSHA: 0.1 mg/m3 TWA (listed under Rhodium).0.001 m
TWA (as Rh) (listed under Rhodium soluble compounds).
Belgium - TWA: (listed as rhodium soluble compounds): 0.01 mg/m3
(as Rh)
France - VME: (listed as rhodium): 1 mg/m3 VME
Germany: (listed as rhodium): 1 mg/m3 VME
Malaysia: (listed as rhodium soluble compounds): 0.01 mg/m3 TWA (
Rh)
Netherlands: (listed as rhodium soluble compounds): 0.001 mg/m3 M
(as Rh)
Spain: (listed as rhodium soluble compounds): 0.01 mg/m3 VLA-ED (
Rh)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: red to brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 121 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: C4Cl2O4Rh2
Molecular Weight: 388.76

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat.
Incompatibilities with Other Materials:
Moisture, oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 14523-22-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetracarbonyldi-Mu-Chlorodirhodium(I) -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 15 Keep away from heat.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 37/39 Wear suitable gloves and eye/face
protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 14523-22-9: 1
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 14523-22-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 14523-22-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Aliquat 336 5137-55-3
4,4'-Isopropylidenebis(2-(2,6-Dibromophenoxy)Ethanol), 98% 4162-45-2
4-Benzylpyridine, 97% 2116-65-6
Bis(Dibenzylideneacetone)Palladium 32005-36-0
Lucifer Yellow CH 67769-47-5
1-Oxododecyl-beta-D-glucopyranoside, 99+% 64395-92-2
Alpha Apo Oxytetracycline,"Can be Used as Secondary Standard" 18695-01-7
Dimethyl carbonate, 99% 616-38-6
2-Nitrodiphenylamine, 99% (UV-Vis) 119-75-5
Diethylaluminum iodide, 25 wt% solution in toluene 108-88-3
2,3-Dihydro-2-Thioxo-4-Thiazoleacetic Acid Ethyl Ester, 96% (Titr.) 38449-49-9
Harmol hydrochloride dihydrate 40580-83-4
Iridium, powder, 99.9% 7439-88-5
Phthalimide, Potassium Derivative, 99% 1074-82-4
Phenethyl alcohol, 99% 60-12-8
1,8-Diaminonaphthalene 479-27-6
Ruthenium(III) Chloride Trihydrate 13815-94-6
2-Chloro-6-Fluorobenzaldehyde, 95% 387-45-1
2-Propylpentanoic acid, 99% 99-66-1
Chrysophanic acid 481-74-3
Tetracarbonyldi-Mu-Chlorodirhodium (I) 14523-22-9
4-tert-Butylcalix (8)Arene, 97% (elemental analysis) 68971-82-4
4-Chlorobenzyl cyanide, 98+% 140-53-4
4,4'-Methylene-Bis-(2,6-Diethylaniline), 99% 13680-35-8
Dl-lysine monohydrochoride 70-53-1
5-Bromoindole-3-Acetic Acid, 99% (Titr.) 40432-84-6
Guanine, 99+% 73-40-5
3,4-Dimethoxyphenol, 97% 2033-89-8
4-Aminobenzo-18-Crown-6, Sesquihydrate, Hydrochloride, 99% (TLC) 0-00-1
Xylidine ponceau 2r 3761-53-3
DL-N-Acetylhomocysteine Thiolactone, 99% 17896-21-8
2-Methyl-2-Oxazoline, 99% (GC) 1120-64-5
1,3-Diethyl-2-thiourea 105-55-5
Acridine Hydrochloride, 97% 17784-47-3
4-Iodobenzonitrile 3058-39-7
4-Vinylbenzo-15-Crown-5, 97% 31943-70-1
3-Anilinopropionitrile, 98% 1075-76-9
Heptafluorobutyric anhydride, 98+% 336-59-4
Magnesium stearate 557-04-0
Methoxyacetyl chloride, stabilized, ca. 95% 38870-89-2
Poly(styrene), secondary standard m.w. 430.100/m.n. 119.600 9003-53-6
3-Chloropropyl thioacetate, tech., 90+% 13012-54-9
2-Methyl-1-Pentanol, 98.5+% 105-30-6
Alpha-Acetoxy-Isobutyryl Bromide, 91% Balance Chlorine Derivative 40635-67-4
3-Amino-5-Hydroxypyrazole, 98% 6126-22-3
6-Hydroxy-1,3-Benzoxathiol-2-One, 98+% 4991-65-5
Vanadium(III) chloride, 99% 7718-98-1
N-Isopropylhydroxylamine Hydrochloride, 97% 50632-53-6
Methyl 3-chlorobenzoate, 98% 2905-65-9
1-Pyrrolyl-borane, 1m sol in THF. 45376-40-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net