Search   
MSDS 
:
 Bis(Dibenzylideneacetone)Palladium
CAS 
:
 32005-36-0
SYNONYMS 
:
 Pd(dba)2.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 32005-36-0 |Bis(Dibenzylideneacetone)Palladium | ca. 100% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin. Irritating to eyes
and skin.

Potential Health Effects
Eye:
Causes eye irritation and possible burns. May cause chemical
conjunctivitis.
Skin:
Causes skin irritation and possible burns.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause kidney damage. May cause systemic toxicity with
acidosis. May cause cardiac disturbances. May cause central nervous
system effects.
Inhalation:
May cause respiratory tract irritation. May cause burns to the
respiratory tract. May cause kidney damage. Central nervous system
effects may include confusion, ataxia (failure of muscular
coordination), vertigo, tinnitus, weakness, disorientation, lethargy,
drowsiness, and finally coma. May cause cardiac abnormalities. Can
produce delayed pulmonary edema. Exposure may produce metabolic
acidosis.
Chronic:
Effects may be delayed. May cause kidney damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Containers may explode
when heated. Non-combustible, substance itself does not burn but may
decompose upon heating to produce corrosive and/or toxic fumes.
Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Do NOT get water
inside containers. For small fires, use dry chemical, carbon
dioxide, or water spray. For large fires, use dry chemical, carbon
dioxide, alcohol-resistant foam, or water spray.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation. Use
with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 32005-36-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: brown - black
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 150 deg C
Autoignition Temperature: Not applicable.
Flash Point: 180 deg C ( 356.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 180 deg C
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: Pd(C6H5CH=CHC(O)CH=CHC6H5)2
Molecular Weight: 575.02

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 32005-36-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Bis(Dibenzylideneacetone)Palladium -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 32005-36-0: 0
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 32005-36-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 32005-36-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Aliquat 336 5137-55-3
4,4'-Isopropylidenebis(2-(2,6-Dibromophenoxy)Ethanol), 98% 4162-45-2
4-Benzylpyridine, 97% 2116-65-6
Bis(Dibenzylideneacetone)Palladium 32005-36-0
Lucifer Yellow CH 67769-47-5
1-Oxododecyl-beta-D-glucopyranoside, 99+% 64395-92-2
Alpha Apo Oxytetracycline,"Can be Used as Secondary Standard" 18695-01-7
Dimethyl carbonate, 99% 616-38-6
2-Nitrodiphenylamine, 99% (UV-Vis) 119-75-5
Diethylaluminum iodide, 25 wt% solution in toluene 108-88-3
2,3-Dihydro-2-Thioxo-4-Thiazoleacetic Acid Ethyl Ester, 96% (Titr.) 38449-49-9
Harmol hydrochloride dihydrate 40580-83-4
Iridium, powder, 99.9% 7439-88-5
Phthalimide, Potassium Derivative, 99% 1074-82-4
Phenethyl alcohol, 99% 60-12-8
1,8-Diaminonaphthalene 479-27-6
Ruthenium(III) Chloride Trihydrate 13815-94-6
2-Chloro-6-Fluorobenzaldehyde, 95% 387-45-1
2-Propylpentanoic acid, 99% 99-66-1
Chrysophanic acid 481-74-3
Tetracarbonyldi-Mu-Chlorodirhodium (I) 14523-22-9
4-tert-Butylcalix (8)Arene, 97% (elemental analysis) 68971-82-4
4-Chlorobenzyl cyanide, 98+% 140-53-4
4,4'-Methylene-Bis-(2,6-Diethylaniline), 99% 13680-35-8
Dl-lysine monohydrochoride 70-53-1
5-Bromoindole-3-Acetic Acid, 99% (Titr.) 40432-84-6
Guanine, 99+% 73-40-5
3,4-Dimethoxyphenol, 97% 2033-89-8
4-Aminobenzo-18-Crown-6, Sesquihydrate, Hydrochloride, 99% (TLC) 0-00-1
Xylidine ponceau 2r 3761-53-3
DL-N-Acetylhomocysteine Thiolactone, 99% 17896-21-8
2-Methyl-2-Oxazoline, 99% (GC) 1120-64-5
1,3-Diethyl-2-thiourea 105-55-5
Acridine Hydrochloride, 97% 17784-47-3
4-Iodobenzonitrile 3058-39-7
4-Vinylbenzo-15-Crown-5, 97% 31943-70-1
3-Anilinopropionitrile, 98% 1075-76-9
Heptafluorobutyric anhydride, 98+% 336-59-4
Magnesium stearate 557-04-0
Methoxyacetyl chloride, stabilized, ca. 95% 38870-89-2
Poly(styrene), secondary standard m.w. 430.100/m.n. 119.600 9003-53-6
3-Chloropropyl thioacetate, tech., 90+% 13012-54-9
2-Methyl-1-Pentanol, 98.5+% 105-30-6
Alpha-Acetoxy-Isobutyryl Bromide, 91% Balance Chlorine Derivative 40635-67-4
3-Amino-5-Hydroxypyrazole, 98% 6126-22-3
6-Hydroxy-1,3-Benzoxathiol-2-One, 98+% 4991-65-5
Vanadium(III) chloride, 99% 7718-98-1
N-Isopropylhydroxylamine Hydrochloride, 97% 50632-53-6
Methyl 3-chlorobenzoate, 98% 2905-65-9
1-Pyrrolyl-borane, 1m sol in THF. 45376-40-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net