**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7439-88-5 |IRIDIUM | 99.9% | 231-095-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Highly flammable.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
Low hazard for usual industrial handling.
Ingestion:
May cause irritation of the digestive tract. Expected to be a low
ingestion hazard.
Inhalation:
Low hazard for usual industrial handling.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Material can spontaneously ignite (pyrophoric) when
exposed to air at normal or slightly elevated temperatures. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion. Flammable solid.
Extinguishing Media:
Use dry chemical to fight fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Remove all sources of
ignition.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Use spark-proof tools and
explosion proof equipment. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Keep away from heat, sparks
and flame. Avoid ingestion and inhalation.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7439-88-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: grey
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 4500 deg C @ 760.00mm Hg
Freezing/Melting Point: 2443 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: Ir
Molecular Weight: 192.20
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat.
Incompatibilities with Other Materials:
Zinc, halogens, sodium peroxide, lead, tin, interhalogens, potassium
hydroxide, nitrate, potassium sulfate, fluorine, chlorine.
Hazardous Decomposition Products:
Not available.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7439-88-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
IRIDIUM -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: METAL POWDER, FLAMMABLE, N.O.S.
Hazard Class: 4.1
UN Number: 3089
Packing Group: III
IMO
Shipping Name: METAL POWDER, FLAMMABLE, N.O.S.
Hazard Class: 4.1
UN Number: 3089
Packing Group: III
RID/ADR
Shipping Name: METAL POWDER, FLAMMABLE, N.O.S.
Hazard Class: 4.1
UN Number: 3089
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 7439-88-5: 0
Canada
CAS# 7439-88-5 is listed on Canada's DSL List.
CAS# 7439-88-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7439-88-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Aliquat 336
| 5137-55-3 |
|
4,4'-Isopropylidenebis(2-(2,6-Dibromophenoxy)Ethanol), 98%
| 4162-45-2 |
|
4-Benzylpyridine, 97%
| 2116-65-6 |
|
Bis(Dibenzylideneacetone)Palladium
| 32005-36-0 |
|
Lucifer Yellow CH
| 67769-47-5 |
|
1-Oxododecyl-beta-D-glucopyranoside, 99+%
| 64395-92-2 |
|
Alpha Apo Oxytetracycline,"Can be Used as Secondary Standard"
| 18695-01-7 |
|
Dimethyl carbonate, 99%
| 616-38-6 |
|
2-Nitrodiphenylamine, 99% (UV-Vis)
| 119-75-5 |
|
Diethylaluminum iodide, 25 wt% solution in toluene
| 108-88-3 |
|
2,3-Dihydro-2-Thioxo-4-Thiazoleacetic Acid Ethyl Ester, 96% (Titr.)
| 38449-49-9 |
|
Harmol hydrochloride dihydrate
| 40580-83-4 |
|
Iridium, powder, 99.9%
| 7439-88-5 |
|
Phthalimide, Potassium Derivative, 99%
| 1074-82-4 |
|
Phenethyl alcohol, 99%
| 60-12-8 |
|
1,8-Diaminonaphthalene
| 479-27-6 |
|
Ruthenium(III) Chloride Trihydrate
| 13815-94-6 |
|
2-Chloro-6-Fluorobenzaldehyde, 95%
| 387-45-1 |
|
2-Propylpentanoic acid, 99%
| 99-66-1 |
|
Chrysophanic acid
| 481-74-3 |
|
Tetracarbonyldi-Mu-Chlorodirhodium (I)
| 14523-22-9 |
|
4-tert-Butylcalix (8)Arene, 97% (elemental analysis)
| 68971-82-4 |
|
4-Chlorobenzyl cyanide, 98+%
| 140-53-4 |
|
4,4'-Methylene-Bis-(2,6-Diethylaniline), 99%
| 13680-35-8 |
|
Dl-lysine monohydrochoride
| 70-53-1 |
|
5-Bromoindole-3-Acetic Acid, 99% (Titr.)
| 40432-84-6 |
|
Guanine, 99+%
| 73-40-5 |
|
3,4-Dimethoxyphenol, 97%
| 2033-89-8 |
|
4-Aminobenzo-18-Crown-6, Sesquihydrate, Hydrochloride, 99% (TLC)
| 0-00-1 |
|
Xylidine ponceau 2r
| 3761-53-3 |
|
DL-N-Acetylhomocysteine Thiolactone, 99%
| 17896-21-8 |
|
2-Methyl-2-Oxazoline, 99% (GC)
| 1120-64-5 |
|
1,3-Diethyl-2-thiourea
| 105-55-5 |
|
Acridine Hydrochloride, 97%
| 17784-47-3 |
|
4-Iodobenzonitrile
| 3058-39-7 |
|
4-Vinylbenzo-15-Crown-5, 97%
| 31943-70-1 |
|
3-Anilinopropionitrile, 98%
| 1075-76-9 |
|
Heptafluorobutyric anhydride, 98+%
| 336-59-4 |
|
Magnesium stearate
| 557-04-0 |
|
Methoxyacetyl chloride, stabilized, ca. 95%
| 38870-89-2 |
|
Poly(styrene), secondary standard m.w. 430.100/m.n. 119.600
| 9003-53-6 |
|
3-Chloropropyl thioacetate, tech., 90+%
| 13012-54-9 |
|
2-Methyl-1-Pentanol, 98.5+%
| 105-30-6 |
|
Alpha-Acetoxy-Isobutyryl Bromide, 91% Balance Chlorine Derivative
| 40635-67-4 |
|
3-Amino-5-Hydroxypyrazole, 98%
| 6126-22-3 |
|
6-Hydroxy-1,3-Benzoxathiol-2-One, 98+%
| 4991-65-5 |
|
Vanadium(III) chloride, 99%
| 7718-98-1 |
|
N-Isopropylhydroxylamine Hydrochloride, 97%
| 50632-53-6 |
|
Methyl 3-chlorobenzoate, 98%
| 2905-65-9 |
|
1-Pyrrolyl-borane, 1m sol in THF.
| 45376-40-7 |
|
|