**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 40635-67-4 |Alpha-Acetoxy-Isobutyryl Bromide | 91 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. May cause chemical conjunctivitis and corneal damage.
Skin:
May cause severe irritation and possible burns. May cause skin rash
(in milder cases), and cold and clammy skin with cyanosis or pale
color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Do NOT get water inside containers. Cool containers with flooding
quantities of water until well after fire is out.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation. Do not get water inside
containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Keep container tightly closed. Do not get on skin or in eyes. Do not
ingest or inhale. Use with adequate ventilation. Do not allow contact
with water. Discard contaminated shoes. Keep from contact with moist
air and steam.
Storage:
Keep container closed when not in use. Corrosives area. Keep
refrigerated. (Store below 4C/39F.) Storage under a nitrogen
blanket has been recommended. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 40635-67-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear very slight yellow
Odor: bromine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 100.0-110.0 deg C @ 25.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: decomposes
Specific Gravity/Density: 1.4310g/cm3
Molecular Formula: C6H9BrO3
Molecular Weight: 209.04
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, moisture, excess heat, oxidizers.
Incompatibilities with Other Materials:
Moisture, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide, bromide fumes.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 40635-67-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Alpha-Acetoxy-Isobutyryl Bromide -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 40635-67-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 40635-67-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 40635-67-4 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Aliquat 336
| 5137-55-3 |
|
4,4'-Isopropylidenebis(2-(2,6-Dibromophenoxy)Ethanol), 98%
| 4162-45-2 |
|
4-Benzylpyridine, 97%
| 2116-65-6 |
|
Bis(Dibenzylideneacetone)Palladium
| 32005-36-0 |
|
Lucifer Yellow CH
| 67769-47-5 |
|
1-Oxododecyl-beta-D-glucopyranoside, 99+%
| 64395-92-2 |
|
Alpha Apo Oxytetracycline,"Can be Used as Secondary Standard"
| 18695-01-7 |
|
Dimethyl carbonate, 99%
| 616-38-6 |
|
2-Nitrodiphenylamine, 99% (UV-Vis)
| 119-75-5 |
|
Diethylaluminum iodide, 25 wt% solution in toluene
| 108-88-3 |
|
2,3-Dihydro-2-Thioxo-4-Thiazoleacetic Acid Ethyl Ester, 96% (Titr.)
| 38449-49-9 |
|
Harmol hydrochloride dihydrate
| 40580-83-4 |
|
Iridium, powder, 99.9%
| 7439-88-5 |
|
Phthalimide, Potassium Derivative, 99%
| 1074-82-4 |
|
Phenethyl alcohol, 99%
| 60-12-8 |
|
1,8-Diaminonaphthalene
| 479-27-6 |
|
Ruthenium(III) Chloride Trihydrate
| 13815-94-6 |
|
2-Chloro-6-Fluorobenzaldehyde, 95%
| 387-45-1 |
|
2-Propylpentanoic acid, 99%
| 99-66-1 |
|
Chrysophanic acid
| 481-74-3 |
|
Tetracarbonyldi-Mu-Chlorodirhodium (I)
| 14523-22-9 |
|
4-tert-Butylcalix (8)Arene, 97% (elemental analysis)
| 68971-82-4 |
|
4-Chlorobenzyl cyanide, 98+%
| 140-53-4 |
|
4,4'-Methylene-Bis-(2,6-Diethylaniline), 99%
| 13680-35-8 |
|
Dl-lysine monohydrochoride
| 70-53-1 |
|
5-Bromoindole-3-Acetic Acid, 99% (Titr.)
| 40432-84-6 |
|
Guanine, 99+%
| 73-40-5 |
|
3,4-Dimethoxyphenol, 97%
| 2033-89-8 |
|
4-Aminobenzo-18-Crown-6, Sesquihydrate, Hydrochloride, 99% (TLC)
| 0-00-1 |
|
Xylidine ponceau 2r
| 3761-53-3 |
|
DL-N-Acetylhomocysteine Thiolactone, 99%
| 17896-21-8 |
|
2-Methyl-2-Oxazoline, 99% (GC)
| 1120-64-5 |
|
1,3-Diethyl-2-thiourea
| 105-55-5 |
|
Acridine Hydrochloride, 97%
| 17784-47-3 |
|
4-Iodobenzonitrile
| 3058-39-7 |
|
4-Vinylbenzo-15-Crown-5, 97%
| 31943-70-1 |
|
3-Anilinopropionitrile, 98%
| 1075-76-9 |
|
Heptafluorobutyric anhydride, 98+%
| 336-59-4 |
|
Magnesium stearate
| 557-04-0 |
|
Methoxyacetyl chloride, stabilized, ca. 95%
| 38870-89-2 |
|
Poly(styrene), secondary standard m.w. 430.100/m.n. 119.600
| 9003-53-6 |
|
3-Chloropropyl thioacetate, tech., 90+%
| 13012-54-9 |
|
2-Methyl-1-Pentanol, 98.5+%
| 105-30-6 |
|
Alpha-Acetoxy-Isobutyryl Bromide, 91% Balance Chlorine Derivative
| 40635-67-4 |
|
3-Amino-5-Hydroxypyrazole, 98%
| 6126-22-3 |
|
6-Hydroxy-1,3-Benzoxathiol-2-One, 98+%
| 4991-65-5 |
|
Vanadium(III) chloride, 99%
| 7718-98-1 |
|
N-Isopropylhydroxylamine Hydrochloride, 97%
| 50632-53-6 |
|
Methyl 3-chlorobenzoate, 98%
| 2905-65-9 |
|
1-Pyrrolyl-borane, 1m sol in THF.
| 45376-40-7 |
|
|