**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 142-61-0 |Hexanoyl chloride | 97 | 205-549-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 14 22 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Flammable. Reacts violently with water. Harmful if swallowed. Causes
burns.
Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
May cause irritation of the digestive tract and possible burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Flammable liquid and vapor. Use of water will
produce irritating and toxic vapors of hydrogen chloride.
Hydrochloric acid solutions react with most metals, forming flammable
hydrogen gas.
Extinguishing Media:
Do NOT use water directly on fire. Use carbon dioxide or dry
chemical. Do NOT get water inside containers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Provide ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not allow water
to get into the container because of violent reaction. Do not get in
eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Do not ingest
or inhale. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not get
water inside containers.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 142-61-0:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear slightly yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 151-153 deg C @ 15 mm Hg
Freezing/Melting Point: -87 deg C
Autoignition Temperature: Not available.
Flash Point: 53 deg C ( 127.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Hydrolysis.
Specific Gravity/Density: .950 g/cm3
Molecular Formula: C6H11ClO
Molecular Weight: 134.61
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Material hydrolyzes
in contact with moisture/water releasing toxic and corrosive fumes
of hydrogen chloride and aqueous hydrochloric acid.
Conditions to Avoid:
Ignition sources, exposure to moist air or water.
Incompatibilities with Other Materials:
Alcohols, oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 142-61-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Hexanoyl chloride -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.*
Hazard Class: 8 (3)
UN Number: 2920
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8
UN Number: 2920
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 14 Reacts violently with water.
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28B After contact with skin, wash immediately with
plenty of water and soap.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 142-61-0: No information available.
Canada
CAS# 142-61-0 is listed on Canada's DSL List.
CAS# 142-61-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 142-61-0 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 1/09/1998 Revision #3 Date: 10/01/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Amino-4'-Methylbenzophenone, 99%
| 36192-63-9 |
|
2-Thiophenecarbonyl chloride, 98%
| 5271-67-0 |
|
Hexanoyl chloride, 97%
| 142-61-0 |
|
N-Benzoyl-L-Tyrosine Ethyl Ester, 99%
| 3483-82-7 |
|
4,5-Dimethyl-2-Oxo-1,3,2-Dioxathiolane
| 4440-90-8 |
|
4-Octylphenyl 2-Chloro-4-(4-Heptylbenzoyl-oxy)Benzoate
| 41161-57-3 |
|
3,5-Dimethylaniline, 98%
| 108-69-0 |
|
Methyl 5-Chloropentanoate, 97%
| 14273-86-0 |
|
2',5'-Dihydroxyacetophenone 97%
| 490-78-8 |
|
n-Ethyl-2,3-xylidine, 99%
| 41115-23-5 |
|
3(and 4)-(Vinylbenzyl)-2-Chloroethyl Sulfone, 99% (Titr.)
| |
|
3-(Trifluoromethyl)phenylacetonitrile, 97+ %
| 2338-76-3 |
|
Methyl (1R,3S)-2,2-Dimethyl-3-(2-Oxopropyl )-Cyclopropaneacetate, 96%
| 54878-01-2 |
|
Methyl Benzenesulfonate, 99% (HPLC)
| 80-18-2 |
|
2-Ethoxybenzyl alcohol, 98%
| 71672-75-8 |
|
Zinc sulfide, 99.99%, < 10 microns
| 1314-98-3 |
|
2,5-Dimethoxybenzaldehyde, 97%
| 93-02-7 |
|
2,4,6-Trichloroaniline, 98.5%
| 634-93-5 |
|
Chrysin
| 480-40-0 |
|
5-Hydroxy-1-methyl-3-trifluoromethyl-1H-pyrazole, 99+%
| 122431-37-2 |
|
Dicyclohexano-24-Crown-8, 97%
| 17455-23-1 |
|
Neutron activation standard, short irradiation
| |
|
2,6-Di-Tert- Butylphenol (Pract)
| 128-39-2 |
|
5-Bromoisophthalic Acid, 96% (Titr.)
| 7732-18-5 |
|
Palladium Atomic Absorption Standard Solution, 1mg/ml Pd in 10% HCl.
| 7440-05-3 |
|
(Acetic anhydride)-d6, 98.5 atom % D
| 108-24-7 |
|
3,6-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt, Tech.,
| 7153-21-1 |
|
4-Chloro-2-Methylaniline, 99%
| 95-69-2 |
|
o-Tolyl Isothiocyanate, 99%
| 614-69-7 |
|
1-(Dimethylamino)-Pyrrole 99%
| 78307-76-3 |
|
Picrolonic Acid, 93% (Titr.)
| 550-74-3 |
|
2-Chloro-4-Fluorophenol, 97+%
| 1996-41-4 |
|
Bis(2-Ethoxyethyl) Sebacate, 93% (GC)
| 624-10-2 |
|
4-tert-Butylcalix (6) Arene
| 78092-53-2 |
|
2-Iodobenzoic acid, 98%
| 88-67-5 |
|
p-Aminomethylated polystyrene: 1% divinylbenzene copolymer beads
| 0-00-1 |
|
1-(2-Furoyl)piperazine, 98%
| 40172-95-0 |
|
DL-Tropic Acid, 97%
| 529-64-6 |
|
2,3-Dihydroxybenzoic acid, 99%
| 303-38-8 |
|
Methyl alcohol-d, 99.5+ atom % D
| 67-56-1 |
|
Paraffin Liquid, Suitable for Nujol Mull Preparations for IR-Spect.
| 8042-47-5 |
|
N,n'-dicyclohexylurea, 98%
| 2387-23-7 |
|
1,2-Naphthoquinone-4-sulfonic acid potassi um salt, tech., 90%
| 5908-27-0 |
|
1,3-Benzenedimethanol, 98%
| 626-18-6 |
|
3-Hydroxy-4-methyl-2(3H)-thiazolethione, 97%
| 49762-08-5 |
|
(R)-2-Methyl glycidol
| 86884-89-1 |
|
(4S,2RS)-2-Methylthiazolidine-4-carboxylic acid, 97%
| 0-01-1 |
|
8-Anilino-1-naphthalenesulfonic acid ammonium salt, 95% (uv-vis)
| 28836-03-5 |
|
Bismuth Pentafluoride, 99%
| 7787-62-4 |
|
2-Vinylpyridine, 97%, stabilized with 0.1% tert-butylcatechol
| 100-69-6 |
|
|