Search   
MSDS 
:
 Paraffin Liquid, Suitable for Nujol Mull Preparations for IR-Spect.
CAS 
:
 8042-47-5
SYNONYMS 
:
 Nujol, Petrolatum Liquid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 8042-47-5 |PARAFFIN LIQUID | 100 | 232-455-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Aspiration of material into the lungs may cause chemical
pneumonitis, which may be fatal.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Ingestion of large amounts will produce laxative effects.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide, or regular foam. Use
agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 8042-47-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear colorless to almost colorless
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 170 deg C (> 338.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: .8750g/cm3
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 8042-47-5: PY8047000
LD50/LC50:
Not available.
Carcinogenicity:
PARAFFIN LIQUID -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 8042-47-5: No information available.
Canada
CAS# 8042-47-5 is listed on Canada's DSL List.
CAS# 8042-47-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 8042-47-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/21/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-4'-Methylbenzophenone, 99% 36192-63-9
2-Thiophenecarbonyl chloride, 98% 5271-67-0
Hexanoyl chloride, 97% 142-61-0
N-Benzoyl-L-Tyrosine Ethyl Ester, 99% 3483-82-7
4,5-Dimethyl-2-Oxo-1,3,2-Dioxathiolane 4440-90-8
4-Octylphenyl 2-Chloro-4-(4-Heptylbenzoyl-oxy)Benzoate 41161-57-3
3,5-Dimethylaniline, 98% 108-69-0
Methyl 5-Chloropentanoate, 97% 14273-86-0
2',5'-Dihydroxyacetophenone 97% 490-78-8
n-Ethyl-2,3-xylidine, 99% 41115-23-5
3(and 4)-(Vinylbenzyl)-2-Chloroethyl Sulfone, 99% (Titr.)
3-(Trifluoromethyl)phenylacetonitrile, 97+ % 2338-76-3
Methyl (1R,3S)-2,2-Dimethyl-3-(2-Oxopropyl )-Cyclopropaneacetate, 96% 54878-01-2
Methyl Benzenesulfonate, 99% (HPLC) 80-18-2
2-Ethoxybenzyl alcohol, 98% 71672-75-8
Zinc sulfide, 99.99%, < 10 microns 1314-98-3
2,5-Dimethoxybenzaldehyde, 97% 93-02-7
2,4,6-Trichloroaniline, 98.5% 634-93-5
Chrysin 480-40-0
5-Hydroxy-1-methyl-3-trifluoromethyl-1H-pyrazole, 99+% 122431-37-2
Dicyclohexano-24-Crown-8, 97% 17455-23-1
Neutron activation standard, short irradiation
2,6-Di-Tert- Butylphenol (Pract) 128-39-2
5-Bromoisophthalic Acid, 96% (Titr.) 7732-18-5
Palladium Atomic Absorption Standard Solution, 1mg/ml Pd in 10% HCl. 7440-05-3
(Acetic anhydride)-d6, 98.5 atom % D 108-24-7
3,6-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt, Tech., 7153-21-1
4-Chloro-2-Methylaniline, 99% 95-69-2
o-Tolyl Isothiocyanate, 99% 614-69-7
1-(Dimethylamino)-Pyrrole 99% 78307-76-3
Picrolonic Acid, 93% (Titr.) 550-74-3
2-Chloro-4-Fluorophenol, 97+% 1996-41-4
Bis(2-Ethoxyethyl) Sebacate, 93% (GC) 624-10-2
4-tert-Butylcalix (6) Arene 78092-53-2
2-Iodobenzoic acid, 98% 88-67-5
p-Aminomethylated polystyrene: 1% divinylbenzene copolymer beads 0-00-1
1-(2-Furoyl)piperazine, 98% 40172-95-0
DL-Tropic Acid, 97% 529-64-6
2,3-Dihydroxybenzoic acid, 99% 303-38-8
Methyl alcohol-d, 99.5+ atom % D 67-56-1
Paraffin Liquid, Suitable for Nujol Mull Preparations for IR-Spect. 8042-47-5
N,n'-dicyclohexylurea, 98% 2387-23-7
1,2-Naphthoquinone-4-sulfonic acid potassi um salt, tech., 90% 5908-27-0
1,3-Benzenedimethanol, 98% 626-18-6
3-Hydroxy-4-methyl-2(3H)-thiazolethione, 97% 49762-08-5
(R)-2-Methyl glycidol 86884-89-1
(4S,2RS)-2-Methylthiazolidine-4-carboxylic acid, 97% 0-01-1
8-Anilino-1-naphthalenesulfonic acid ammonium salt, 95% (uv-vis) 28836-03-5
Bismuth Pentafluoride, 99% 7787-62-4
2-Vinylpyridine, 97%, stabilized with 0.1% tert-butylcatechol 100-69-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net