Search   
MSDS 
:
 o-Tolyl Isothiocyanate, 99%
CAS 
:
 614-69-7
SYNONYMS 
:
 2-Methylphenylisothiocyanate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 614-69-7 |o-Tolyl Isothiocyanate | 99% | 210-390-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Moisture
sensitive.Lachrymator (substance which increases the flow of tears).

Potential Health Effects
Eye:
Produces irritation, characterized by a burning sensation, redness,
tearing, inflammation, and possible corneal injury. Lachrymator
(substance which increases the flow of tears). May cause
conjunctivitis, ulceration and turbidity of the cornea.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause liver and kidney damage.
Inhalation:
Causes respiratory tract irritation. Exposure produces central
nervous system depression. At high concentrations, isocyanates affect
mucous membranes of the respiratory tract and may lead to fatal
pulmonary edema. Exposure to low and often even unmeasurable
isocyanate concentration results in sensitization. Can produce
delayed pulmonary edema. In rare instances, exposure may cause
sensitization, resulting in inflammation of the mucous membranes and
in eczematous eruptions.
Chronic:
May cause liver and kidney damage. Effects may be delayed. May cause
lung damage. Repeated or prolonged exposure may cause allergic
reactions in sensitive individuals. Inhalation of product may
aggravate existing chronic repiratory problems such as asthma,
emphysema or bronchitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid. Do
NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
For ingestion, the stomach sould be intubated, aspirated, and
lavaged with a slurry of activated charcoal--protect the airway from
aspiration of gastric contents. Treat symptomatically and
supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Containers
may explode in the heat of a fire. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined
areas. Reacts with water to form acidic gases which when in contact
with metal may liberate flammable and/or hydrogen gas. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
For large fires, use water spray, fog, or alcohol-resistant foam. Do
NOT get water inside containers. For small fires, use carbon dioxide,
dry chemical, dry sand, or alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Avoid contact with eyes, skin, and clothing. Keep container tightly
closed. Avoid ingestion and inhalation. Use with adequate
ventilation. Do not allow contact with water. Wash clothing before
reuse. Discard contaminated shoes. Keep from contact with moist air
and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 614-69-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear faint yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 239 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 107 deg C ( 224.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: may decompose
Specific Gravity/Density: 1.1150g/cm3
Molecular Formula: C8H7NS
Molecular Weight: 149.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. May decompose on exposure to moist air or
water.
Conditions to Avoid:
Incompatible materials, moisture, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, strong acids, alcohols, amines, caustics (e.g.
ammonia, ammonium hydroxide, calcium hydroxide, potassium hydroxide,
sodium hydroxide), moisture, glycols.
Hazardous Decomposition Products:
Hydrogen cyanide, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, hydrocarbons.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 614-69-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
o-Tolyl Isothiocyanate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ISOCYANATES, TOXIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2206
Packing Group: II
IMO
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing Group: II
RID/ADR
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 614-69-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 614-69-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 614-69-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-4'-Methylbenzophenone, 99% 36192-63-9
2-Thiophenecarbonyl chloride, 98% 5271-67-0
Hexanoyl chloride, 97% 142-61-0
N-Benzoyl-L-Tyrosine Ethyl Ester, 99% 3483-82-7
4,5-Dimethyl-2-Oxo-1,3,2-Dioxathiolane 4440-90-8
4-Octylphenyl 2-Chloro-4-(4-Heptylbenzoyl-oxy)Benzoate 41161-57-3
3,5-Dimethylaniline, 98% 108-69-0
Methyl 5-Chloropentanoate, 97% 14273-86-0
2',5'-Dihydroxyacetophenone 97% 490-78-8
n-Ethyl-2,3-xylidine, 99% 41115-23-5
3(and 4)-(Vinylbenzyl)-2-Chloroethyl Sulfone, 99% (Titr.)
3-(Trifluoromethyl)phenylacetonitrile, 97+ % 2338-76-3
Methyl (1R,3S)-2,2-Dimethyl-3-(2-Oxopropyl )-Cyclopropaneacetate, 96% 54878-01-2
Methyl Benzenesulfonate, 99% (HPLC) 80-18-2
2-Ethoxybenzyl alcohol, 98% 71672-75-8
Zinc sulfide, 99.99%, < 10 microns 1314-98-3
2,5-Dimethoxybenzaldehyde, 97% 93-02-7
2,4,6-Trichloroaniline, 98.5% 634-93-5
Chrysin 480-40-0
5-Hydroxy-1-methyl-3-trifluoromethyl-1H-pyrazole, 99+% 122431-37-2
Dicyclohexano-24-Crown-8, 97% 17455-23-1
Neutron activation standard, short irradiation
2,6-Di-Tert- Butylphenol (Pract) 128-39-2
5-Bromoisophthalic Acid, 96% (Titr.) 7732-18-5
Palladium Atomic Absorption Standard Solution, 1mg/ml Pd in 10% HCl. 7440-05-3
(Acetic anhydride)-d6, 98.5 atom % D 108-24-7
3,6-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt, Tech., 7153-21-1
4-Chloro-2-Methylaniline, 99% 95-69-2
o-Tolyl Isothiocyanate, 99% 614-69-7
1-(Dimethylamino)-Pyrrole 99% 78307-76-3
Picrolonic Acid, 93% (Titr.) 550-74-3
2-Chloro-4-Fluorophenol, 97+% 1996-41-4
Bis(2-Ethoxyethyl) Sebacate, 93% (GC) 624-10-2
4-tert-Butylcalix (6) Arene 78092-53-2
2-Iodobenzoic acid, 98% 88-67-5
p-Aminomethylated polystyrene: 1% divinylbenzene copolymer beads 0-00-1
1-(2-Furoyl)piperazine, 98% 40172-95-0
DL-Tropic Acid, 97% 529-64-6
2,3-Dihydroxybenzoic acid, 99% 303-38-8
Methyl alcohol-d, 99.5+ atom % D 67-56-1
Paraffin Liquid, Suitable for Nujol Mull Preparations for IR-Spect. 8042-47-5
N,n'-dicyclohexylurea, 98% 2387-23-7
1,2-Naphthoquinone-4-sulfonic acid potassi um salt, tech., 90% 5908-27-0
1,3-Benzenedimethanol, 98% 626-18-6
3-Hydroxy-4-methyl-2(3H)-thiazolethione, 97% 49762-08-5
(R)-2-Methyl glycidol 86884-89-1
(4S,2RS)-2-Methylthiazolidine-4-carboxylic acid, 97% 0-01-1
8-Anilino-1-naphthalenesulfonic acid ammonium salt, 95% (uv-vis) 28836-03-5
Bismuth Pentafluoride, 99% 7787-62-4
2-Vinylpyridine, 97%, stabilized with 0.1% tert-butylcatechol 100-69-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net