Search   
MSDS 
:
 Picrolonic Acid, 93% (Titr.)
CAS 
:
 550-74-3
SYNONYMS 
:
 3-Methyl-4-Nitro-1-(P-Nitrophenyl)-2-Pyrazolin-5-One;
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 550-74-3 |3h-pyrazol-3-one,2,4-dihydro-5-methyl-| 93 | 208-986-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 40

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Limited evidence of a carcinogenic effect.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. If irritation
develops, get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Minimize dust generation and
accumulation. Avoid contact with skin and eyes. Keep container
tightly closed. Avoid ingestion and inhalation. Use only in a
chemical fume hood. Wash clothing before reuse.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 550-74-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Negligible in water.
Specific Gravity/Density: Not available.
Molecular Formula: C10H8N4O5
Molecular Weight: 264.0798

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 550-74-3: UQ9510000
LD50/LC50:
Not available.
Carcinogenicity:
3h-pyrazol-3-one,2,4-dihydro-5-methyl-4-nitro-2-(4-nitrophen -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 40 Limited evidence of a carcinogenic effect.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 550-74-3: No information available.
Canada
CAS# 550-74-3 is listed on Canada's DSL List.
CAS# 550-74-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 550-74-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/19/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Amino-4'-Methylbenzophenone, 99% 36192-63-9
2-Thiophenecarbonyl chloride, 98% 5271-67-0
Hexanoyl chloride, 97% 142-61-0
N-Benzoyl-L-Tyrosine Ethyl Ester, 99% 3483-82-7
4,5-Dimethyl-2-Oxo-1,3,2-Dioxathiolane 4440-90-8
4-Octylphenyl 2-Chloro-4-(4-Heptylbenzoyl-oxy)Benzoate 41161-57-3
3,5-Dimethylaniline, 98% 108-69-0
Methyl 5-Chloropentanoate, 97% 14273-86-0
2',5'-Dihydroxyacetophenone 97% 490-78-8
n-Ethyl-2,3-xylidine, 99% 41115-23-5
3(and 4)-(Vinylbenzyl)-2-Chloroethyl Sulfone, 99% (Titr.)
3-(Trifluoromethyl)phenylacetonitrile, 97+ % 2338-76-3
Methyl (1R,3S)-2,2-Dimethyl-3-(2-Oxopropyl )-Cyclopropaneacetate, 96% 54878-01-2
Methyl Benzenesulfonate, 99% (HPLC) 80-18-2
2-Ethoxybenzyl alcohol, 98% 71672-75-8
Zinc sulfide, 99.99%, < 10 microns 1314-98-3
2,5-Dimethoxybenzaldehyde, 97% 93-02-7
2,4,6-Trichloroaniline, 98.5% 634-93-5
Chrysin 480-40-0
5-Hydroxy-1-methyl-3-trifluoromethyl-1H-pyrazole, 99+% 122431-37-2
Dicyclohexano-24-Crown-8, 97% 17455-23-1
Neutron activation standard, short irradiation
2,6-Di-Tert- Butylphenol (Pract) 128-39-2
5-Bromoisophthalic Acid, 96% (Titr.) 7732-18-5
Palladium Atomic Absorption Standard Solution, 1mg/ml Pd in 10% HCl. 7440-05-3
(Acetic anhydride)-d6, 98.5 atom % D 108-24-7
3,6-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt, Tech., 7153-21-1
4-Chloro-2-Methylaniline, 99% 95-69-2
o-Tolyl Isothiocyanate, 99% 614-69-7
1-(Dimethylamino)-Pyrrole 99% 78307-76-3
Picrolonic Acid, 93% (Titr.) 550-74-3
2-Chloro-4-Fluorophenol, 97+% 1996-41-4
Bis(2-Ethoxyethyl) Sebacate, 93% (GC) 624-10-2
4-tert-Butylcalix (6) Arene 78092-53-2
2-Iodobenzoic acid, 98% 88-67-5
p-Aminomethylated polystyrene: 1% divinylbenzene copolymer beads 0-00-1
1-(2-Furoyl)piperazine, 98% 40172-95-0
DL-Tropic Acid, 97% 529-64-6
2,3-Dihydroxybenzoic acid, 99% 303-38-8
Methyl alcohol-d, 99.5+ atom % D 67-56-1
Paraffin Liquid, Suitable for Nujol Mull Preparations for IR-Spect. 8042-47-5
N,n'-dicyclohexylurea, 98% 2387-23-7
1,2-Naphthoquinone-4-sulfonic acid potassi um salt, tech., 90% 5908-27-0
1,3-Benzenedimethanol, 98% 626-18-6
3-Hydroxy-4-methyl-2(3H)-thiazolethione, 97% 49762-08-5
(R)-2-Methyl glycidol 86884-89-1
(4S,2RS)-2-Methylthiazolidine-4-carboxylic acid, 97% 0-01-1
8-Anilino-1-naphthalenesulfonic acid ammonium salt, 95% (uv-vis) 28836-03-5
Bismuth Pentafluoride, 99% 7787-62-4
2-Vinylpyridine, 97%, stabilized with 0.1% tert-butylcatechol 100-69-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net