Search   
MSDS 
:
 Benzyltriphenylphosphonium borohydride
CAS 
:
 18117-29-8
SYNONYMS 
:
 Triphenylbenzylphosphonium borohydride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 18117-29-8 |Benzyltriphenylphosphonium borohydride| >95 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 15 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Contact with water liberates extremely flammable gases. Causes
burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Reacts with
water to form explosive hydrogen gas.
Extinguishing Media:
Use dry sand or earth to smother fire. Do NOT use water directly on
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation. Do
not get water inside containers. Remove ignition sources since
flammable hydrogen gas may be generated by reaction with water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Use with adequate ventilation. Discard
contaminated shoes. Do not breathe dust or fumes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep away
from strong acids. Corrosives area. Water free area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 18117-29-8:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 157-163 deg C (dec)
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: Reacts.
Specific Gravity/Density:
Molecular Formula: C25H26BP
Molecular Weight: 368.26

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Water contact produces hydrogen gas.
Conditions to Avoid:
Ignition sources, dust generation, moisture.
Incompatibilities with Other Materials:
Water, strong oxidizing agents, acids.
Hazardous Decomposition Products:
Carbon monoxide, oxides of phosphorus, irritating and toxic fumes and
gases, carbon dioxide, hydrogen gas, boron oxides.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 18117-29-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzyltriphenylphosphonium borohydride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: WATER-REACTIVE SOLID, CORROSIVE, N.O.S.*
Hazard Class: 4.3 (8)
UN Number: 3131
Packing Group: II
IMO
Shipping Name: WATER-REACTIVE SOLID, CORROSIVE, N.O.S.
Hazard Class: 4.3 (8)
UN Number: 3131
Packing Group: II
RID/ADR
Shipping Name: WATER-REACTIVE SOLID, CORROSIVE, N.O.S.
Hazard Class: 4.3
UN Number: 3131
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 15 Contact with water liberates extremely
flammable gases.
R 34 Causes burns.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 18117-29-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 18117-29-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 18117-29-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/11/1998 Revision #3 Date: 3/15/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,6-Dihydroxynaphthalene 575-44-0
1-(3-Fluorophenyl)Cyclohexanecarbonitrile, 98% 0-01-1
1-(4-Fluorophenyl)Cyclohexanecarbonitrile, 90 71486-43-6
n-Butylcyclohexane, 99+% 1678-93-9
Ketomalonic Acid Monohydrate, 99% 473-90-5
Deuterium Oxide 100%, Atom % D, Packaged in 0.75 ml. Ampules 7789-20-0
alpha-Bromo-o-xylene, 94% (GC) 89-92-9
5-Methyl-2-Hexanol, 98% 627-42-9
Agmatine Sulfate, 70% 2482-00-0
Ethyl 2-aminobenzoate, 99% 87-25-2
Allyl Phenyl Sulfone, 98% 16212-05-8
Amberlite IRP-69 Ion Exchange Resin 55464-99-8
Aminodiphenylmethane, 97% 91-00-9
Carbon Tetrabromide, Contains 5-10% Water 558-13-4
Cellulose acetate hydrogen phthalate, (17.0-22.0 acetyl content) 9004-38-0
4-Benzyloxy-3-Methoxybenzyl Alcohol, 97% 33693-48-0
HEPES 1M Solution 7365-45-9
O-(Tetrahydro-2H-pyran-2(RS)-yl)hydroxylamine 0-00-0
4-Hydroxybenzaldehyde, 99% (Titr.) 123-08-0
Ammonium Sulfobetaine-3, 5% Solution in Water.
L-tert-Leucine, 99% 20859-02-3
Benzyltriphenylphosphonium borohydride 18117-29-8
3,4-Dichlorobenzyl Alcohol, 98% 1805-32-9
Palmitoyl chloride, 98.0 112-67-4
1-Fluoro-2-methyl-N,N-bis(1-methylethyl)-1-propen-1-amine 0-00-0
Aqualine Anolyte-K 108-32-7
Methylaluminum sesquichloride, 1M solution in toluene 108-88-3
Dimethyl Phosphate 813-78-5
2,5-Dimethoxyphenethylamine 3600-86-0
Butane in Aerosol Container 106-97-8
4-Ethylbenzaldehyde 4748-78-1
Perfluoro-tert-butyl alcohol, 99% 2378-02-1
(+/-)-Indoline-2-carboxylic acid, 97.0 78348-24-0
1-Bromo-2-Methyl-4,4,4-trifluorobutane, 95+% 0-00-0
Chloral Betaine 2218-68-0
Aqualine Anolyte 67-56-1
Aqualine Complete 5, 2, & 1 111-90-0
Aqualine Solvent 67-56-1
Aqualine Titrant 2 67-56-1
Aqualine Catholyte-U 67-48-1
Sorbitan monooleate 1338-43-8
TAE 50X Solution 60-00-4
TAE 10X Solution 60-00-4
PBS 10X Solution 7447-40-7
1,2,3-Trifluorobenzene 1489-53-8
Dichloromethane, HPLC Grade, 99.9% 75-09-2
Selleger's Stain 7553-56-2
4-Hydroxy-7-Methoxycoumarin 17575-15-4
Trifluoroacetic Acid-D 99.5 Atom% D 599-00-8
Xanthone 90-47-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net