Search   
MSDS 
:
 alpha-Bromo-o-xylene, 94% (GC)
CAS 
:
 89-92-9
SYNONYMS 
:
 2-Methylbenzyl bromide; o-Xylyl bromide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 89-92-9 |alpha-Bromo-o-xylene | 94 | 201-951-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Lachrymator
(substance which increases the flow of tears).

Potential Health Effects
Eye:
Produces irritation, characterized by a burning sensation, redness,
tearing, inflammation, and possible corneal injury. Lachrymator
(substance which increases the flow of tears). May cause chemical
conjunctivitis and corneal damage.
Skin:
Causes skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May cause liver and kidney damage. May cause central
nervous system effects. May cause blood abnormalities. May cause
cardiac abnormalities.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. May cause blood changes. May cause cardiac
abnormalities. Inhalation at high concentrations may cause CNS
depression and asphixiation.
Chronic:
May cause liver and kidney damage. Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid. Do
NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Do NOT use water directly on fire. Use foam, dry chemical, or carbon
dioxide. Do NOT get water inside containers. Cool containers with
flooding quantities of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Use
with adequate ventilation. Wash clothing before reuse. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 89-92-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 216- 217 deg C @ 742.00mmHg
Freezing/Melting Point: 18.00 - 20.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: 82 deg C ( 179.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: practically insoluble
Specific Gravity/Density: 1.3810g/cm3
Molecular Formula: C8H9Br
Molecular Weight: 185.06

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, bases, alcohols, amines.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 89-92-9: CY9039100
LD50/LC50:
Not available.
Carcinogenicity:
alpha-Bromo-o-xylene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: XYLYL BROMIDE
Hazard Class: 6.1
UN Number: 1701
Packing Group: II
IMO
Shipping Name: XYLYL BROMIDE
Hazard Class: 6.1
UN Number: 1701
Packing Group: II
RID/ADR
Shipping Name: XYLYL BROMIDE
Hazard Class: 6.1
UN Number: 1701
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 89-92-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 89-92-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 89-92-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #8 Date: 8/05/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,6-Dihydroxynaphthalene 575-44-0
1-(3-Fluorophenyl)Cyclohexanecarbonitrile, 98% 0-01-1
1-(4-Fluorophenyl)Cyclohexanecarbonitrile, 90 71486-43-6
n-Butylcyclohexane, 99+% 1678-93-9
Ketomalonic Acid Monohydrate, 99% 473-90-5
Deuterium Oxide 100%, Atom % D, Packaged in 0.75 ml. Ampules 7789-20-0
alpha-Bromo-o-xylene, 94% (GC) 89-92-9
5-Methyl-2-Hexanol, 98% 627-42-9
Agmatine Sulfate, 70% 2482-00-0
Ethyl 2-aminobenzoate, 99% 87-25-2
Allyl Phenyl Sulfone, 98% 16212-05-8
Amberlite IRP-69 Ion Exchange Resin 55464-99-8
Aminodiphenylmethane, 97% 91-00-9
Carbon Tetrabromide, Contains 5-10% Water 558-13-4
Cellulose acetate hydrogen phthalate, (17.0-22.0 acetyl content) 9004-38-0
4-Benzyloxy-3-Methoxybenzyl Alcohol, 97% 33693-48-0
HEPES 1M Solution 7365-45-9
O-(Tetrahydro-2H-pyran-2(RS)-yl)hydroxylamine 0-00-0
4-Hydroxybenzaldehyde, 99% (Titr.) 123-08-0
Ammonium Sulfobetaine-3, 5% Solution in Water.
L-tert-Leucine, 99% 20859-02-3
Benzyltriphenylphosphonium borohydride 18117-29-8
3,4-Dichlorobenzyl Alcohol, 98% 1805-32-9
Palmitoyl chloride, 98.0 112-67-4
1-Fluoro-2-methyl-N,N-bis(1-methylethyl)-1-propen-1-amine 0-00-0
Aqualine Anolyte-K 108-32-7
Methylaluminum sesquichloride, 1M solution in toluene 108-88-3
Dimethyl Phosphate 813-78-5
2,5-Dimethoxyphenethylamine 3600-86-0
Butane in Aerosol Container 106-97-8
4-Ethylbenzaldehyde 4748-78-1
Perfluoro-tert-butyl alcohol, 99% 2378-02-1
(+/-)-Indoline-2-carboxylic acid, 97.0 78348-24-0
1-Bromo-2-Methyl-4,4,4-trifluorobutane, 95+% 0-00-0
Chloral Betaine 2218-68-0
Aqualine Anolyte 67-56-1
Aqualine Complete 5, 2, & 1 111-90-0
Aqualine Solvent 67-56-1
Aqualine Titrant 2 67-56-1
Aqualine Catholyte-U 67-48-1
Sorbitan monooleate 1338-43-8
TAE 50X Solution 60-00-4
TAE 10X Solution 60-00-4
PBS 10X Solution 7447-40-7
1,2,3-Trifluorobenzene 1489-53-8
Dichloromethane, HPLC Grade, 99.9% 75-09-2
Selleger's Stain 7553-56-2
4-Hydroxy-7-Methoxycoumarin 17575-15-4
Trifluoroacetic Acid-D 99.5 Atom% D 599-00-8
Xanthone 90-47-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net