Search   
MSDS 
:
 Aminodiphenylmethane, 97%
CAS 
:
 91-00-9
SYNONYMS 
:
 Benzenemethanamine, alpha-phenyl-; alpha-Aminodiphenylmethane;     Benzhydrylamine; (Diphenylmethyl)amine; 1,1-Diphenylmethylamine;     Methylamine, 1,1-diphenyl-; alpha-Phenylbenzenemethanamine;     alpha-Phenylbenzylamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 91-00-9 |Aminodiphenylmethane | 97 | 202-032-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.Air
sensitive.

Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Inhalation of dust may cause respiratory tract
irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of soap and
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation. Place under an inert
atmosphere.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Use with adequate ventilation. Handle
under an inert atmosphere. Store protected from air.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not expose
to air. Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR ??1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Appearance: colorless to light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 295 deg C
Freezing/Melting Point: 12 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0630
Molecular Formula: C13H13N
Molecular Weight: 183.0977

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, exposure to air, excess
heat.
Incompatibilities with Other Materials:
Air, strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 91-00-9: DA4407300
LD50/LC50:
CAS# 91-00-9: Oral, mouse: LD50 = 400 mg/kg.
Carcinogenicity:
Aminodiphenylmethane -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Bacteria: Phytobacterium phosphoreum: EC50 = 47.1-51.6; 5,15,30 min;
Microtox test at 15 C

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 91-00-9: No information available.
United Kingdom Occupational Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 91-00-9 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 91-00-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/14/1999 Revision #1 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,6-Dihydroxynaphthalene 575-44-0
1-(3-Fluorophenyl)Cyclohexanecarbonitrile, 98% 0-01-1
1-(4-Fluorophenyl)Cyclohexanecarbonitrile, 90 71486-43-6
n-Butylcyclohexane, 99+% 1678-93-9
Ketomalonic Acid Monohydrate, 99% 473-90-5
Deuterium Oxide 100%, Atom % D, Packaged in 0.75 ml. Ampules 7789-20-0
alpha-Bromo-o-xylene, 94% (GC) 89-92-9
5-Methyl-2-Hexanol, 98% 627-42-9
Agmatine Sulfate, 70% 2482-00-0
Ethyl 2-aminobenzoate, 99% 87-25-2
Allyl Phenyl Sulfone, 98% 16212-05-8
Amberlite IRP-69 Ion Exchange Resin 55464-99-8
Aminodiphenylmethane, 97% 91-00-9
Carbon Tetrabromide, Contains 5-10% Water 558-13-4
Cellulose acetate hydrogen phthalate, (17.0-22.0 acetyl content) 9004-38-0
4-Benzyloxy-3-Methoxybenzyl Alcohol, 97% 33693-48-0
HEPES 1M Solution 7365-45-9
O-(Tetrahydro-2H-pyran-2(RS)-yl)hydroxylamine 0-00-0
4-Hydroxybenzaldehyde, 99% (Titr.) 123-08-0
Ammonium Sulfobetaine-3, 5% Solution in Water.
L-tert-Leucine, 99% 20859-02-3
Benzyltriphenylphosphonium borohydride 18117-29-8
3,4-Dichlorobenzyl Alcohol, 98% 1805-32-9
Palmitoyl chloride, 98.0 112-67-4
1-Fluoro-2-methyl-N,N-bis(1-methylethyl)-1-propen-1-amine 0-00-0
Aqualine Anolyte-K 108-32-7
Methylaluminum sesquichloride, 1M solution in toluene 108-88-3
Dimethyl Phosphate 813-78-5
2,5-Dimethoxyphenethylamine 3600-86-0
Butane in Aerosol Container 106-97-8
4-Ethylbenzaldehyde 4748-78-1
Perfluoro-tert-butyl alcohol, 99% 2378-02-1
(+/-)-Indoline-2-carboxylic acid, 97.0 78348-24-0
1-Bromo-2-Methyl-4,4,4-trifluorobutane, 95+% 0-00-0
Chloral Betaine 2218-68-0
Aqualine Anolyte 67-56-1
Aqualine Complete 5, 2, & 1 111-90-0
Aqualine Solvent 67-56-1
Aqualine Titrant 2 67-56-1
Aqualine Catholyte-U 67-48-1
Sorbitan monooleate 1338-43-8
TAE 50X Solution 60-00-4
TAE 10X Solution 60-00-4
PBS 10X Solution 7447-40-7
1,2,3-Trifluorobenzene 1489-53-8
Dichloromethane, HPLC Grade, 99.9% 75-09-2
Selleger's Stain 7553-56-2
4-Hydroxy-7-Methoxycoumarin 17575-15-4
Trifluoroacetic Acid-D 99.5 Atom% D 599-00-8
Xanthone 90-47-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net