Search   
MSDS 
:
 1,6-Dihydroxynaphthalene
CAS 
:
 575-44-0
SYNONYMS 
:
 1,6-Naphthalenediol
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 575-44-0 |1,6-DIHYDROXYNAPHTHALENE | | 209-386-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately. Do NOT induce vomiting. If conscious and
alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Flammable liquid and vapor.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up,
then place into a suitable container for disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Empty containers retain product residue, (liquid and/or vapor), and
can be dangerous. Keep away from heat, sparks and flame.
Storage:
Keep away from heat, sparks, and flame.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 575-44-0:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure. Wear appropriate protective
gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Wear a NIOSH/MSHA
or European Standard EN 149 approved full-facepiece
airline respirator in the positive pressure mode with
emergency escape provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Not available.
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 138.00 - 140.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 575-44-0: QJ4743333
LD50/LC50:
Not available.
Carcinogenicity:
1,6-DIHYDROXYNAPHTHALENE -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 22 Do not breathe dust.
WGK (Water Danger/Protection)
CAS# 575-44-0: 2
Canada
CAS# 575-44-0 is listed on Canada's NDSL List.
CAS# 575-44-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 575-44-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/04/1996 Revision #2 Date: 4/04/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,6-Dihydroxynaphthalene 575-44-0
1-(3-Fluorophenyl)Cyclohexanecarbonitrile, 98% 0-01-1
1-(4-Fluorophenyl)Cyclohexanecarbonitrile, 90 71486-43-6
n-Butylcyclohexane, 99+% 1678-93-9
Ketomalonic Acid Monohydrate, 99% 473-90-5
Deuterium Oxide 100%, Atom % D, Packaged in 0.75 ml. Ampules 7789-20-0
alpha-Bromo-o-xylene, 94% (GC) 89-92-9
5-Methyl-2-Hexanol, 98% 627-42-9
Agmatine Sulfate, 70% 2482-00-0
Ethyl 2-aminobenzoate, 99% 87-25-2
Allyl Phenyl Sulfone, 98% 16212-05-8
Amberlite IRP-69 Ion Exchange Resin 55464-99-8
Aminodiphenylmethane, 97% 91-00-9
Carbon Tetrabromide, Contains 5-10% Water 558-13-4
Cellulose acetate hydrogen phthalate, (17.0-22.0 acetyl content) 9004-38-0
4-Benzyloxy-3-Methoxybenzyl Alcohol, 97% 33693-48-0
HEPES 1M Solution 7365-45-9
O-(Tetrahydro-2H-pyran-2(RS)-yl)hydroxylamine 0-00-0
4-Hydroxybenzaldehyde, 99% (Titr.) 123-08-0
Ammonium Sulfobetaine-3, 5% Solution in Water.
L-tert-Leucine, 99% 20859-02-3
Benzyltriphenylphosphonium borohydride 18117-29-8
3,4-Dichlorobenzyl Alcohol, 98% 1805-32-9
Palmitoyl chloride, 98.0 112-67-4
1-Fluoro-2-methyl-N,N-bis(1-methylethyl)-1-propen-1-amine 0-00-0
Aqualine Anolyte-K 108-32-7
Methylaluminum sesquichloride, 1M solution in toluene 108-88-3
Dimethyl Phosphate 813-78-5
2,5-Dimethoxyphenethylamine 3600-86-0
Butane in Aerosol Container 106-97-8
4-Ethylbenzaldehyde 4748-78-1
Perfluoro-tert-butyl alcohol, 99% 2378-02-1
(+/-)-Indoline-2-carboxylic acid, 97.0 78348-24-0
1-Bromo-2-Methyl-4,4,4-trifluorobutane, 95+% 0-00-0
Chloral Betaine 2218-68-0
Aqualine Anolyte 67-56-1
Aqualine Complete 5, 2, & 1 111-90-0
Aqualine Solvent 67-56-1
Aqualine Titrant 2 67-56-1
Aqualine Catholyte-U 67-48-1
Sorbitan monooleate 1338-43-8
TAE 50X Solution 60-00-4
TAE 10X Solution 60-00-4
PBS 10X Solution 7447-40-7
1,2,3-Trifluorobenzene 1489-53-8
Dichloromethane, HPLC Grade, 99.9% 75-09-2
Selleger's Stain 7553-56-2
4-Hydroxy-7-Methoxycoumarin 17575-15-4
Trifluoroacetic Acid-D 99.5 Atom% D 599-00-8
Xanthone 90-47-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net